Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
NP<br />
Internal Hex - Narrow Platform 2.0mm<br />
PENDING<br />
DRILLING PROTOCOL<br />
Hex 2.00<br />
NP<br />
3.0<br />
L<br />
Drill sequence by bone type - An additional 1 mm must<br />
be added to the length of the drill to account for the angled<br />
cutting tip.<br />
D-I, D-II Dense bone considerations - Countersink<br />
should be used if the standard dense bone protocol is not<br />
sufficient to fully seat the implant without exceeding the<br />
recommended maximum insertion torque of max. 60Ncm<br />
for implant Ø3.75mm and above. Do not exceed max.<br />
45Ncm for implants diameter lower than 3.75mm.<br />
NP3010<br />
L 10.0mm<br />
NP3011<br />
L 11.5mm<br />
NP3013<br />
L 13.0mm<br />
NP3016<br />
L 16.0mm<br />
Drilling<br />
Speed (RPM)<br />
Diameter<br />
1200-<br />
1500<br />
Soft Bone / Dense Bone<br />
900-<br />
1,200<br />
700-<br />
900<br />
Ø 1.9 Ø 2.0 Ø 2.8<br />
Important:<br />
In cases of extremely hard<br />
bone, it is recommended<br />
to drill with ø 3.0 mm drill only<br />
through the cortical layer<br />
Optional<br />
*The procedure recommended by GP Implant LTD cannot replace the judgment and the experience of the surgeon.<br />
Page 59 web: www.gp-implant.com store: www.gp-direct.com mob: +972 (0) 538 205 494 Product catalog v2.17