MBP Installation Conditions
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
INSTALLATION<br />
CONDITIONS
1<br />
ADDITIONAL WORK<br />
Following our template visit we may have asked<br />
you to carry out some additional work. This<br />
additional work is vitally important and had<br />
been requested to help ensure a smooth<br />
installation as well as give the work surfaces a<br />
foundation to last a lifetime.<br />
Please make sure that the requested work has<br />
been carried out as failure to do so could result<br />
in an aborted installation visit of which is<br />
chargeable.<br />
If you have any questions surrounding any<br />
requested additional work, please feel free to<br />
contact us.
2<br />
REPRESENTATIVE<br />
Please ensure a representative is on-site during<br />
the installation of the work surfaces.<br />
Whether this is the client, kitchen fitter, designer<br />
or the like, they must be authorised to inspect<br />
and sign off the completed installation.<br />
A representative doesn't have to be present for<br />
the duration of the installation but it is advised<br />
in case our installation teams have any<br />
questions or the client has any suggestions.
3<br />
ACCESS<br />
Please make sure all routes to the kitchen are<br />
clear and safe. Worktops are heavy and can<br />
weigh 100KG/M2. It is vitally important that the<br />
installation team can carry the work surfaces<br />
into the kitchen safely.<br />
Please also make sure there is ample parking<br />
for a large van and any parking permits are<br />
ready for the arrival of the installation team.<br />
Please also ensure that no other trades are<br />
working in the kitchen who could obstruct our<br />
installation teams.<br />
<strong>Installation</strong>s can take between 2-8 hours<br />
depending on the installation and level of work<br />
required on-site. Please bear this in mind.
4<br />
DISCONNECT<br />
If temporary worktops have been installed post<br />
template, please make sure these tops have<br />
been removed prior to our installation visit.<br />
Our installations teams cannot remove or<br />
dispose of temporary worktops.<br />
Please also ensure that all sinks, taps and hobs<br />
have been disconnected preceding to our<br />
arrival.<br />
Our teams do not have the tools or<br />
qualifications to undertake plumbing or<br />
electrical work therefore it is your<br />
responsibility to arrange the disconnection of<br />
appliances which affect the installation of the<br />
work surfaces.
5<br />
WALLS<br />
Any tiling in areas around the work surfaces<br />
must take place after the surfaces have been<br />
installed. Do not tile the walls between our<br />
template and installation visits unless you have<br />
left ample room for the work surfaces to be<br />
installed.<br />
The same applies to plaster; any plastering<br />
work should be carried out post-installation.<br />
In the event of plasterwork being disturbed<br />
during the installation, all costs associated with<br />
making good are the clients responsibility. The<br />
same applies to any disturbance caused to the<br />
paintwork of the walls.
6<br />
TRADES<br />
Where other trades follow the installation, it is<br />
the responsibility of the client to cover the work<br />
surfaces with protective sheeting.<br />
Marble Building Products (Yorkshire) Ltd. are<br />
not liable for any damage caused to the work<br />
surfaces after our installation visit.<br />
Upon request, we can provide protective<br />
sheeting for the work surfaces.<br />
Items such as dust sheets, cardboard and jiffy<br />
foam can be used as protection.<br />
The client must advise other trades that<br />
standing on the work surfaces is not advised.
7<br />
ADHESIVES<br />
To allow joints and sealants to harden and set<br />
correctly, we strongly advise leaving the work<br />
surfaces alone for 24 hours.<br />
This includes the connection of sinks, taps and<br />
appliances as any movement in the work<br />
surfaces could cause a break in the joints or<br />
seals. Please also avoid creating any dust in<br />
the room as this can settle on wet sealants,<br />
ruining the standard of finish.<br />
After 24 hours, you're safe to use the surfaces<br />
as intended.
8<br />
INSPECTION<br />
Upon completion of the installation, please<br />
thoroughly check the work carried out before<br />
signing off the job.<br />
In the unlikely event that you later find damage,<br />
shortage of goods or anything which renders<br />
the work surfaces as unacceptable, please<br />
inform us within 24 hours.<br />
If you find any deficiencies in the service<br />
provided, you must inform us within 3 days of<br />
the completed installation.<br />
Further information can be found at the bottom<br />
of the delivery note.
Change language