Chiavette Unificate Hauptkatalog

More documents

Recommendations

Info

Shims S SPECIAL PRODUCTS AND ACCORDING TO DRAWINGS MATERIAL Hardening and tempering steel or casehardening steel THICKNESS from 0,8 mm to 5,00 mm MACHINING Blanking, turning, heat treatments, grinding, polishing... A 0.8 B 0.8 W D X Thickness tolerances up to ±0,01mm Special identification of the components by paint or laser mark available Our specialization consists in realizing products taken from the client drawings, that need blanking, turning, heat treatments, grinding, polishing, eventual laser mark and/or paint job for recognition of job. 92
Rod assemblies and special components SPECIAL PRODUCTS AND ACCORDING TO DRAWINGS In special production, you can get the desired product, thanks to the specialisation of qualified personnel. This consists in making products to design, which require blanking, milling, heat treatment, grinding, polishing, eventually marking and assembly. 93
Page 1:
General CatalogUE
Page 5 and 6:
Chiavette Unificate SpA sells its p
Page 7 and 8:
Pins for clevises DIN 71752 Series
Page 9 and 10:
Other types of protection coatings
Page 11 and 12:
1. INTRODUCTION The rod ends and sp
Page 13 and 14:
c) Equivalent load allowed If both
Page 15 and 16:
3. Criteria of use Rod ends and sph
Page 17 and 18:
5. CLEARANCE OF THE JOINT The clear
Page 19 and 20:
7. Threaded pin for rod endS DIN IS
Page 21 and 22:
DIN ISO 12240-4 Series K Female thr
Page 23 and 24:
B C1 d2 DIN ISO 12240-4 Series K IS
Page 25 and 26:
DIN ISO 12240-4 Series K Male threa
Page 27 and 28:
B C1 DIN ISO 12240-4 Series K Femal
Page 29 and 30:
DIN ISO 12240-4 Series K ISO 8139 (
Page 31 and 32:
DIN ISO 12240-1 Series K steel/stee
Page 33 and 34:
Page 35 and 36:
B C1 d2 DIN ISO 12240-4 Series K IS
Page 37 and 38:
B C1 DIN ISO 12240-4 Series K Male
Page 39 and 40:
Page 41 and 42:
B C1 DIN ISO 12240-4 Series K Femal
Page 43 and 44: DIN ISO 12240-1 Series K Coupling:
Page 45 and 46: 43
Page 47 and 48: Static load By static load we mean
Page 49 and 50: g Similar to DIN 71752 (measures no
Page 51 and 52: Former CNOMO 06-07-14 20° g a2 f d
Page 53 and 54: DIN 71752 thread according to ISO 8
Page 55 and 56: Clevises with elongated hole simila
Page 57 and 58: DIN 71752 thread according to ISO 8
Page 59 and 60: Lockable pins for clevises series G
Page 61 and 62: Dimensions mm d D k z z1 r d2 l1 l
Page 63 and 64: Pins in aluminium 11S for clevises
Page 65 and 66: KL retainers for pins “PKs” and
Page 67 and 68: Pins ISO Dimensions mm DESIGNATION
Page 69 and 70: Hexagonal nuts UNI 5588 (DIN. 934)
Page 71 and 72: Sliding moment In the male-female c
Page 73 and 74: d1 Ball a SW1 d4 Ba l Similar to DI
Page 75 and 76: Similar to DIN 71802 form CS - long
Page 77 and 78: Ball socket similar to DIN 71805 fo
Page 79 and 80: Ball socket similar to DIN 71805 fo
Page 81 and 82: Ball d1 Ball stud DIN 71803 form C
Page 83 and 84: SW Ball d1 Ball d4 Axial joints sim
Page 85 and 86: 1 PRODUCT DESCRIPTION AND TECH. DAT
Page 87 and 88: Ød4 Ød3 t3 d5 Ød6 Feather keys e
Page 89 and 90: Form A Form B Form A/B b h l 45 50
Page 91 and 92: Dimensional tolerances for woodruff
Page 93: WOODRUFF KEYS ISO 3912 - UNI 6606 -
show all

Chiavette Unificate Hauptkatalog

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?