List 1 Approved Steelmakers and Manufacturers of ... - Lloyd's Register
List 1 Approved Steelmakers and Manufacturers of ... - Lloyd's Register
List 1 Approved Steelmakers and Manufacturers of ... - Lloyd's Register
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
This section lists works approved by Lloyd’s <strong>Register</strong> Group for steelmaking <strong>and</strong> the<br />
manufacture <strong>of</strong> rolled steel plate, strip, sections <strong>and</strong> bars in accordance with the<br />
requirements <strong>of</strong> LR's Rules <strong>and</strong> Regulations for the Classification <strong>of</strong> Ships Part 2, Chapter 3.<br />
The information listed for each works is a summary <strong>of</strong> the product, generic grade <strong>and</strong><br />
maximum thickness, or in the case <strong>of</strong> round bars, diameter approved.<br />
It is important to note that this <strong>List</strong> does not provide full details <strong>of</strong> the grades approved by<br />
LR as required by the Rules. The combinations <strong>of</strong> deoxidation practice ( e.g. killed,<br />
semi-killed), micro-alloying <strong>and</strong> grain refining additions (e.g. Al, Al + Nb Al + Nb + V,<br />
etc.), in association with specific rolling procedures<br />
( e.g. N or TM, etc.), are not included. These parameters may vary within each grade by<br />
manufacturer <strong>and</strong> could influence the fabrication procedures that can be applied.<br />
Where required this information should be obtained from the current certificate <strong>of</strong> approval<br />
issued to the manufacturer by LR.<br />
Works designated ( Q.A. <strong>Approved</strong> ) are also approved under the Quality Scheme for<br />
Materials in accordance with LR's Rules <strong>and</strong> Regulations for the Classification <strong>of</strong> Ships<br />
Part 2, Chapter 1 Section 2.<br />
The list also includes firms approved for the manufacture <strong>of</strong> fabricated steel sections <strong>and</strong><br />
steel by powder metallurgy.<br />
Approval only covers the manufacturing location listed, it does not extend to other works<br />
owned by the same company.<br />
The local LR surveying <strong>of</strong>fice is also listed.<br />
Abbreviations<br />
B.O.S. Basic Oxygen Steelmaking<br />
Con Cast Continuous Casting<br />
E.A.F. Electric Arc Furnace<br />
O.H. Open Hearth<br />
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
NOTICE AND TERMS OF USE<br />
<strong>Lloyd's</strong> <strong>Register</strong>, its affiliates <strong>and</strong> subsidiaries <strong>and</strong> their respective <strong>of</strong>ficers, employees or<br />
agents are, individually <strong>and</strong> collectively, referred to in this clause as the '<strong>Lloyd's</strong> <strong>Register</strong><br />
Group'. The <strong>Lloyd's</strong> <strong>Register</strong> Group assumes no responsibility <strong>and</strong> shall not be liable to any<br />
person for any loss, damage or expense caused by reliance on the information or advice in<br />
this document or howsoever provided, unless that person has signed a contract with the<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Argentina<br />
ACEROS ANGELETTI S.A. Buenos Aires<br />
Burzaco<br />
Av. Hipolito Yrigoyen 16102/96<br />
(1852)-Burzaco<br />
Pcia. de Buenos Aires<br />
Tel No: +54 11 4299 0110 Fax no: +54 11 4299 0110<br />
Email:ventas@acerosangeletti.com.ar<br />
Web: www.acerosangeletti.com.ar<br />
Certificate No. MD00/3676/ 0002/ 1 Expiry date 22/02/2015<br />
Australia<br />
BLUESCOPE STEEL (AIS) PTY. LTD. Sydney<br />
Port Kembla Steelworks<br />
P.O. Box 1854<br />
Wollongong<br />
NSW 2500<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Plates<br />
Hot Rolled Coil<br />
Tel: +61 2 42754666 Fax: +61 2 42753045 Email: mailto:nigel.attwell@bluescopesteel.com<br />
Plates with specified through thickness properties notation Z35 may be added.<br />
Normalizing heat treatments carried out by sub-contractor, Bisalloy.<br />
Certificate # MD00/1929/0008/1 Expiry date: 20/07/2015<br />
Austria<br />
BREITENFELD EDELSTAHL AG Vienna<br />
Breitenfeldstrasse 22<br />
A-8662 Mitterdorf im Mürztal<br />
Including VD/VOD<br />
Tel: +43 (0)3858 6161 231 Fax +43 (0)3858 6161 248<br />
Email mailto:marina.paller@breitenfeld.at<br />
Web: http://www.breitenfeld.at<br />
Certificate # MD00/3255/0003/1 Expiry Date: 08/06/2012<br />
BÖHLER EDELSTAHL GmbH Vienna<br />
Mariazellerstraße 25<br />
Postfach 96<br />
A-8605 Kapfenberg<br />
Steelmaking<br />
Steelmaking<br />
Bars<br />
E.A.F. / Ingot<br />
Ingots<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
E.A.F./Ingot/Con Cast<br />
E.A.F./Ingot/Con Cast<br />
Structural<br />
Tel: +43 3862 20 37063 Fax: +43 3862 20 37559 Email: mailto:walter.wolflehner@bohler-edelstahl.at Web:http://www.bohler-edelstahl.com<br />
Certificate #: MD00/0200/0007/1 Expiry date: 22/01/2015<br />
BÖHLER YBBSTAL PROFIL GmbH Vienna<br />
Sections<br />
Bars<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
Structural<br />
Waidh<strong>of</strong>nerstraße 8<br />
3333 Böhlerwerk<br />
Tel: +43 7448 7007 504 Fax: +43 7448 7007 250 Email: mailto:herwig.kohlreiter@bohler-pr<strong>of</strong>il.com Web:http://www.bohler-pr<strong>of</strong>il.com<br />
High alloy bars <strong>and</strong> sections may be accepted for approved applications.<br />
Certificate #: MD00/0202/0006/1 Expiry date: 28/01/2015<br />
SONDERSTAHLWERK BREITENFELD GmbH Vienna<br />
Breitenfeldgasse 23<br />
A-8661 Wartberg<br />
Ingots<br />
Including remelting <strong>of</strong> Ni materials<br />
Tel +43 (0)3858 6161 231 Fax +43 (0)3858 6161 248 Email marina.paller@breitenfeld.at Web http://www.breitenfeld.at<br />
Certificate # MD00/3256/0003/1 Expiry date: 08/06/2012<br />
ESR<br />
Page<br />
2<br />
carbon, carbon-manganese 30<br />
carbon, carbon-manganese 30<br />
As below<br />
A, B, D, E 51<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 51<br />
EH27S, EH32, EH36<br />
A, B, D, E 13<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
6<br />
EH27S, EH32, EH36<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless, duplex stainless<br />
As below<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless, duplex stainless<br />
220<br />
A, B, D, E 20<br />
AH32, AH36, DH32, DH36, EH32, EH36 20<br />
A, B, D, E 20<br />
AH32, AH36, DH32, DH36, EH32, EH36 20<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless, duplex stainless<br />
20<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless, duplex<br />
38<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
STAHL JUDENBURG GmbH Vienna Bars<br />
Normal Strength<br />
A 120<br />
Structural<br />
carbon, carbon-manganese 120<br />
Machinery<br />
carbon, carbon-manganese, carbon-manganese 120<br />
Gußstahlwerkstrasse 21<br />
A-8750 Judenburg<br />
Tel: +43 3572 701-358 Fax: +43 3572 701-248 Email: mailto:christian.sunnitsch@stj.at Web: http://www.stahl-judenburg.com<br />
Certificate #: MD00/1643/0006/1 Expiry date: 29/01/2015<br />
VOESTALPINE GROBBLECH GmbH Vienna<br />
P.O Box 3<br />
Voest.- Alpine - Str. 3<br />
A-4020 Linz<br />
Tel: +43 50304 15 9091 Fax: +43 50304 55 9091<br />
Email: mailto:ronald.lachmair@voestalpine.com<br />
Web: www.voestalpine.com<br />
MD00/1614/0007/1 Expiry date: 30/07/2014<br />
VOESTALPINE STAHL DONAWITZ GmbH & Co KG Vienna<br />
Kerpelystraße 199<br />
A 8700 Leoben<br />
Steelmaking<br />
Plates<br />
Steelmaking<br />
Semi-Finished<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Clad<br />
B.O.S. / Con Cast<br />
Blooms/Billets<br />
Tel: +43 50304 25-4659 Fax: +43 50304 65-2464 Email: mailto:karin.rockenschaub@voestalpine.com Web:http://www.voestalpine.com/stahldonawitz<br />
Certificate #: MD00/2976/0004/1 Expiry date: 21/04/2015<br />
Belgium<br />
APERAM Genk Antwerp<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Swinnenwijerweg 5<br />
Genk - Zuid, Zone 6A<br />
B-3600 Genk<br />
Tel: +32 89 30 25 68 Fax: +32 89 30 25 53 Email: stefaan.maes@arcelormittal.com<br />
Certificate #: MD00/3423/0003/1 Expiry date: 29/01/2014<br />
DUFERCO LA LOUVIÈRE S.A. Antwerp<br />
2, Rue Des Rivaux<br />
B-7100 La Louvière<br />
Tel: +32 6427 2912 Email mailto:m.deruyver@duferco.be<br />
Certificate #: MD00/3380/0002/1 Expiry date: 24/09/2013<br />
ESB sprl Antwerp<br />
ENGINEERING STEEL BELGIUM<br />
Rue de l'Environnement, 8<br />
B - 4100<br />
Seraing<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F./A.O.D./Con Cast<br />
B.O.S/V.O.D./Con Cast<br />
Slabs<br />
Austenitic Stainless<br />
E.A.F. / Con Cast<br />
Slabs<br />
E.A.F./Ingot/Con Cast<br />
Ingots<br />
Blooms<br />
Tel No: +32 433 885 56 Fax No: +32 433 809 00<br />
Email : mmatijasevic@esb.be<br />
Web : www.esb.be<br />
Certificate No: MD00/3858/000/1 Expiry date: 10/11/2013<br />
Materials Suitable for Steel Forgings, Pipe <strong>and</strong> Tube, Ingots up to 800mm diameter <strong>and</strong> Blooms up to 600 mm diameter<br />
INDUSTEEL BELGIUM SA Antwerp<br />
Steelmaking<br />
Plates<br />
Page<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
3<br />
As below<br />
A, B, D, E 140<br />
AH40, AH42, DH40, DH42, EH40, EH42 55<br />
AH32, AH36, DH32, DH36, EH32, EH36, FH32,<br />
FH36<br />
140<br />
360AR 40<br />
410AR 50<br />
360FG, 410FG, 460FG, 490FG, 510FG 140<br />
1.5Ni, 3.5Ni, 5Ni, 9Ni 50<br />
LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,<br />
LTEH36, LTFH32, LTFH36<br />
140<br />
D/304L 50<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 285<br />
austenitic stainless<br />
austenitic stainless<br />
austenitic stainless 200<br />
304L, 304LN, 316L, 316LN, 317L, 317LN, 321, 14<br />
347<br />
carbon, carbon-manganese<br />
carbon, carbon-manganese, Normal strength,<br />
Higher Strength<br />
250<br />
As below<br />
carbon, carbon-manganese, alloy 16<br />
carbon, carbon-manganese, alloy, Ferritic<br />
600<br />
Stainless Steel*<br />
As below<br />
A, B, D, E 50<br />
AH32, AH36, DH32, DH36, EH32, EH36, EH40 50<br />
DH42, DH46, DH50, DH55, DH62, DH69, EH42, 100<br />
EH46, EH50, EH55, EH62, EH69, FH42, FH46,<br />
FH50, FH55, FH62, FH69<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 50<br />
LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,<br />
LTEH36, 5Ni<br />
50<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Belgium<br />
INDUSTEEL BELGIUM SA Antwerp<br />
ARCELOR MITTAL GROUP<br />
266, Rue de Châtelet<br />
B-6030 Charleroi<br />
Plates<br />
Austenitic Stainless<br />
Duplex Stainless<br />
Tel: +32 71 44 14 51 Fax: +32 71 44 19 29 Email: mailto:patrick.malgre@arcelormittal.com Web: http://www.arcelormittal.com<br />
* accepted for approved applications<br />
Quenched <strong>and</strong> tempered grades with specified through thickness properties<br />
Certificate #: MD00/0477/0008/1 Expiry date: 08/07/2014<br />
NLMK CLABECQ S.A. Antwerp<br />
Rue de Clabecq, 101<br />
B-1460 Ittre<br />
Tel: +32 (0) 2 3919227 Fax: +32 (0)2 3919883<br />
Email:j.vermeulen@eu.nlmk.com<br />
Web:http://www.eu.nlmk.com<br />
MQS <strong>Approved</strong> - Approval No. MQS016<br />
Certificate #: MD00/2204/0011/1 Expiry date: 24.06.2015<br />
Brazil<br />
ARCELORMITTAL BRAZIL S/A (ARCELORMITTAL Rio de Janeiro<br />
TUBARÃO )<br />
Av. Brigadeiro Eduardo Gomes<br />
930 - Jardim Limoeiro<br />
29164-970 Serra/ES<br />
Plates<br />
Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
304L, 304LN, 316L, 316LN 50<br />
UNS S31803(MOD)* 40<br />
A, B, D, E 120<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
120<br />
360AR, 410AR 25<br />
360, 410 50<br />
360FG, 410FG, 460FG, 490FG, 510FG 120<br />
carbon, carbon-manganese<br />
carbon, carbon-manganese 250<br />
D 16<br />
A, B 19<br />
AH27S, AH32 16<br />
460FG, 490FG 16<br />
360FG, 410FG 19<br />
Carbon <strong>and</strong> carbon-manganese grades cover the following LR normal <strong>and</strong> higher tensile strength grades. A, B, D, E, AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
Tel: +55 27 3348 3261 Fax: +55 27 3348 2211<br />
Email : mailto:adelson.nascimento@arcelormittal.com<br />
Web: http://www.arcelormittal.com/br/<br />
Certificate #: MD00/0342/0008/1 Expiry date: 01/07/2014<br />
GERDAU AÇOMINAS S.A. Rio de Janeiro Steelmaking<br />
B.O.S./Ingot/Con Cast<br />
Rodovia MG-443 KM 7<br />
Fazenda do Cadete<br />
36420-000-Ouro Branco-MG<br />
Semi-Finished Rolled Billets<br />
Slabs<br />
Blooms<br />
Billets<br />
Rolled Slabs<br />
Rolled Blooms<br />
Tel: +55 3137 493471 Fax: +55 3137 3215 Email: mailto:isaac.soares@gerdau.com.br web http://www.gerdau.com.br<br />
Slabs <strong>and</strong> blooms intended for plates <strong>and</strong> forgings<br />
Certificate #: MD00/2071/0006/1 Expiry date: 26/02/2015<br />
GERDAU S/A São Paulo<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Page<br />
E.A.F. / Ingot<br />
Ingots<br />
Machinery<br />
Chain Cable Stock<br />
4<br />
As below<br />
Carbon, Carbon-Manganese, Alloy 180<br />
carbon, carbon-manganese, alloy 250<br />
carbon, carbon-manganese, alloy 300<br />
carbon, carbon-manganese, alloy 180<br />
Carbon, Carbon-Manganese, Alloy 450<br />
Carbon, Carbon-Manganese, Alloy 900<br />
As below<br />
carbon, carbon-manganese 4<br />
carbon, carbon-manganese 125<br />
R3 117<br />
U1, U2, U3 125<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
Pindamonhagaba Plant<br />
Rod.Luiz Dumont Villares km 2- Moreira César<br />
CEP 12442-260<br />
Pindamonhangaba S.P.<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Tel: +55 12 2126 7174 Fax: +55 12 2126 7325 Email: mailto:fern<strong>and</strong>o.almeida@gerdau.com.br Web:http://www.gerdau.com.br<br />
Bars for grade R3 chain cable is restricted to supply to Companhia Brasileira Amarras with specification EC-Gr.3a.<br />
Ingots as semi-finished products to the above maximum weight nominal 630mm x 530mm x 2150mm long are accepted for further processing for rolled<br />
products.<br />
Certificate #: MD00/2867/0006/1 Expiry date: 24/03/2014<br />
USIMINAS Rio de Janeiro<br />
Usinas Siderúrgicas de Minas Gerais S/A<br />
Usina Intendente Câmera<br />
Steelmaking<br />
Plates<br />
Hot Rolled Coil<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
Av. Pedro Linhares Gomes, 5431<br />
Distrito Usiminas, CEP 35160-900<br />
Ipatinga, Minas Gerais<br />
Tel +55 (0)31 38293136 Fax +55 (0)31 38293516 Email: mailto:ssampaio@usiminas.com.br<br />
Z25 <strong>and</strong> Z35 through thickness properties for plates <strong>of</strong> approved grades in the TM+Acc <strong>and</strong> TM+Acc+Temper conditions<br />
Materials Quality Scheme <strong>Approved</strong> - MQS014<br />
Certificate #: MD00/1603/0007/1 Expiry date: 24/06/2014<br />
USINAS SIDERÚRGICAS DE MINAS GERAIS S.A. -<br />
USIMINAS<br />
São Paulo<br />
Steelmaking<br />
Plates<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
As below<br />
A, B, D, E 50<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
50<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 50<br />
A 12<br />
360, 410 12<br />
As below<br />
A, B, D, E 80<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
80<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 80<br />
Rodovia Cônego Domênico Rangoni, Km 6<br />
Vila da Indústrias 11573-900<br />
Cubatão - São Paulo<br />
Tel: +55 13 3362-2978 Fax: +55 13 3362-3775 Email: mailto: takayochi.ueno@usiminas.com Web:http://www.usiminas.com<br />
Specified through thickness properties for plates in the normalised condition, rolled from ingots, up to 35 mm thickness.<br />
Specified through thickness properties for plates <strong>of</strong> grades up to DH32 <strong>and</strong> thickness up to 26mm in the normalised condition, rolled from continuously cast<br />
slab.<br />
Material Quality Scheme approved, MQS 044<br />
Certificate #: MD00/1193/0008/1 Expiry date: 29/09/2014<br />
Bulgaria<br />
STOMANA INDUSTRY AD S<strong>of</strong>ia<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
E.A.F. / Con Cast<br />
Blooms/Billets<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
1, Vladaysko Vastanie Str.<br />
2304 Pernik<br />
Tel: +359 76 68 1730 Fax: +359 76 670 250 Emailmailto:vs<strong>of</strong>teva@stomana.bg Web: http://www.stomana.bg<br />
Certificate #: MD00/1868/0008/1 Expiry date: 17/04/2013<br />
Page<br />
5<br />
As below<br />
As below 200<br />
A 40<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 40<br />
360AR, 410AR 25<br />
360FG, 410FG, 460FG, 490FG, 510FG 40<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Canada<br />
ESSAR STEEL ALGOMA INC. Toronto<br />
105 West Street<br />
Sault Ste. Marie<br />
Ontario<br />
P6A 5P2<br />
Steelmaking<br />
Plates<br />
Tel +1 705 945 2603 E-mail: mailto:lori.pilot@algoma.com Web:http://www.algoma.com<br />
Certificate #: MD00/0092/0006/1 Expiry date: 06/05/2014<br />
GERDAU AMERISTEEL CORPORATION Toronto<br />
Cambridge Division<br />
160 Orion Place<br />
Steelmaking<br />
Sections<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Cambridge<br />
N1T 1R9<br />
Tel: +1 519 740 2488 ext 1420 Fax: +1 519 623 2062 Email: mailto:ehannah@gerdauameristeel.com Web:http://www.gerdauameristeel.com<br />
Certificate #: MD00/3046/0003/1 Expiry date: 01/02/2013<br />
GERDAU AMERISTEEL WHITBY Toronto<br />
Hopkin Street South<br />
Whitby<br />
Ontario L1N 5T1<br />
Steelmaking<br />
Sections<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
CSA grades 260W, 300W <strong>and</strong> 350W may be accepted for approved applications as equivalent to the appropriate <strong>Lloyd's</strong> <strong>Register</strong> grade stated above.<br />
Tel: +1 905 668 8811 ext 2744 Fax: +1 905 668 9361 Email: mailto:rgriffith@gerdauamericsteel.com Web: http://www.gerdauameristeel.com<br />
Certificate #: MD00/0322/0007/1 Expiry date: 31/01/2014<br />
China, People's Republic <strong>of</strong><br />
ANGANG STEEL COMPANY LIMITED Dalian<br />
HEAVY PLATE MILL OF MEDIUM AND HEAVY PLATE PLANT<br />
Honqi Road, Lishan District,<br />
Anshan City,<br />
Liaoning Province<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Tel: +86 412 673 4836 Fax: +86 412 672 5766 Email mailto:hp318@sina.com Web http://www.ansteel.con.cn<br />
All grades <strong>and</strong> thicknesses accepted with specified through thickness properties, Z25 <strong>and</strong> Z35 designations.<br />
Certificate Number: MD00/1869/0009/1 Expiry: 23/03/2015<br />
ANGANG STEEL COMPANY LIMITED Dalian<br />
MEDIUM PLATE MILL OF MEDIUM AND HEAVY PLATE PLANT<br />
Angang Area<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
As below<br />
D, E 50<br />
A, B 60<br />
AH32, AH36, DH32, DH36, EH32, EH36 50<br />
As below<br />
A 26<br />
As below<br />
A, B 15<br />
AH27S, AH32, AH36 15<br />
A, B, D, E 100<br />
AH42, AH46, AH50, AH55, DH42, DH46, DH50, 80<br />
DH55, EH42, EH46, EH50, EH55, FH42, FH46,<br />
FH50, FH55<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
DH40, EH27S, EH32, EH36, EH40, FH27S, FH32,<br />
FH36, FH40<br />
100<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 50<br />
1.5Ni, 3.5Ni, 5Ni, 9Ni 40<br />
As below<br />
Normal strength, Higher Strength 300<br />
A, B, D 40<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 40<br />
360AR, 410AR 20<br />
360FG, 410FG, 460FG, 490FG, 510FG 40<br />
Anshan City<br />
Liaoning Province<br />
Tel +86 0412 675 1030 Fax +86 0412 675 2819 Email mailto:zy-zb-111@163.com<br />
Slabs as semi finished products nominal 2000mm width x nominal 7000mm length to the above maximum thickness are approved for further processing for<br />
rolled products.<br />
Certificate No. MD00/2757/0007/1 Expiry date: 23/10/2014<br />
ANGANG STEEL COMPANY LIMITED Dalian<br />
Steelmaking<br />
Hot Rolled Coil<br />
No 3 STEELMAKING & HOT ROLLING PLANT<br />
Tiexi District<br />
Tel: +86 412 6334292/6734881 Fax: +86 412 6722093 Web http://www.ansteel.com.cn<br />
Certificate #: MD00/3301/0002/1 Expiry date: 03/01/2013<br />
Page<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
6<br />
As below<br />
A, B, D 20<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 20<br />
EH27S, EH32, EH36<br />
360FG, 410FG, 460FG, 490FG, 510FG 20<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
ANGANG STEEL COMPANY LIMITED Dalian Steelmaking<br />
B.O.S. / Con Cast<br />
As below<br />
Semi-Finished Blooms/Billets<br />
carbon-manganese, carbon, carbon manganese 250<br />
Plates<br />
Normal Strength<br />
A, B, D, E 40<br />
Higher Strength<br />
AH32, AH36, AH40, DH32, DH36, DH40, EH32,<br />
EH36, EH40<br />
40<br />
Boiler & Pressure Vessel 360FG, 410FG, 460FG, 490FG, 510FG 40<br />
BAYUQUAN 5500 HEAVY PLATE MILL<br />
115000 Bayuquan<br />
Yingkou City<br />
Liaoning Province<br />
Tel: +86 412 6334292 Fax: +86 412 6722093 Web: www.ansteel.com.cn<br />
Certificate No. MD00/3595/0002/1 Expiry date: 11/05/2012<br />
ANYANG IRON & STEEL CO., LTD. Wuhan<br />
Yindu District<br />
Anyang City<br />
Henan Province<br />
Tel: +86 372 3122486 Fax: +86 372 3121403<br />
email:mailto:angangzjb@126.com<br />
Web:http://www.agsteel.com.cn<br />
Certificate #: MD00/2200/0008/1 Expiry date: 20/01/2013<br />
BAOSHAN IRON & STEEL CO., LTD. Shanghai Port<br />
Core Base<br />
No 885, Fujin Road<br />
Baoshan District<br />
Shanghai 201900<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Sections<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Hot Rolled Coil<br />
B.O.S./E.A.F./Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
B.O.S. / Con Cast<br />
B.O.S. / Ingot<br />
Slabs<br />
Blooms<br />
Billets<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Tel +86 21 2664 8888 Fax +86 21 2664 8000 Web:http://www.baosteel.com<br />
Including all plate grades <strong>and</strong> thicknesses with specified through thickness properties (Z35)<br />
Semi Finished Products - Killed for further processing for forgings, Fine Grain for further processing for rolled products.<br />
Certificate #: MD00/1343/0013/1 Expiry date: 30/03/2013<br />
Materials Quality Scheme <strong>Approved</strong> - MQS 038<br />
BAOSHAN IRON & STEEL CO., LTD. Shanghai Port<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Page<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
7<br />
As Below<br />
Normal strength 230<br />
A, B, D 40<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 36<br />
360AR, 410AR, 460FG, 490FG, 510FG 36<br />
360FG, 410FG 40<br />
A, B 12<br />
As below<br />
As below<br />
carbon, carbon-manganese 400<br />
carbon, carbon-manganese, alloy 450<br />
carbon, carbon-manganese, alloy 200<br />
A, B, D, E 130<br />
AH42, AH46, AH50, AH55, DH42, DH46, DH50,<br />
DH55, EH42, EH46, EH50, EH55<br />
50<br />
AH40, DH40, EH40, FH27S, FH32, FH36, FH40 68<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
100<br />
360FG, 410FG, 460FG, 490FG, 510FG 100<br />
LTAH40, LTDH40, LTEH40, LTFH27S, LTFH32,<br />
LTFH36, LTFH40<br />
68<br />
LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36<br />
80<br />
A, B, D 22<br />
AH32, AH36 12<br />
460FG, 490FG, 510FG 12<br />
360FG, 410FG 22<br />
As below<br />
carbon, carbon-manganese 250<br />
A, B, D, E 60<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
50<br />
460FG, 490FG, 510FG 50<br />
360FG, 410FG 60<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Core Base Plate Line No. 2<br />
No. 777 North Wenchuan Road<br />
Baoshan District<br />
Shanghai 200949<br />
Tel +86 21 266488888 Fax +86 21 2664 8000 Email: to: huangjh@baosteel.com Web:http://www.baosteel.com<br />
Semi-finished products in carbon, carbon-manganese fine grain (element combinations as stated, slabs to 2300mm wide, to 12000mm long to 54 tonnes for further<br />
processing to rolled products<br />
Z25 & Z35 designations made be added for plates up to 35mm thick produced in the as rolled condition from concast slab for grades A, B <strong>and</strong> D with specified<br />
through thickness properties<br />
Z25 & Z35 designations made be added for plates with specified through thickness properties for the approved grades in the normalised condition, normalised<br />
rolled condition, TM condition <strong>and</strong> TM +Acc condition<br />
Z25 & Z35 designations made be added for plates up to 40mm thick produced in the normalised rolled condition from concast slab for grades DH36 <strong>and</strong> DH32<br />
with specified through thickness properties<br />
Certificate No. MD00/3489/0007/1 Expiry date: 15/12/2014<br />
Materials Quality Scheme <strong>Approved</strong> - MQS 051<br />
BENGANG STEEL PLATES CO., LTD. Dalian<br />
No. 18, Gangtie Road, Pingshan District<br />
Benxi City<br />
Liaoning Province<br />
Tel 0414 7827678 Fax: 0414 7827814 Email:zyjfx@sina.cn<br />
Certificate #: MD00/3311/0003/1 Expiry date: 28/01/2013<br />
BENXI BEIYING IRON & STEEL (GROUP) CO., LTD. Dalian<br />
BeiTai Town, Pingshan District<br />
BenXi City<br />
LiaoNing Province<br />
117017<br />
Tel 0414 2529304 Fax: 0414 2529112 Email mailto:byqsq@yahoo.cn<br />
Certificate #: MD00/3311/0003/1 Expiry date: 28/01/2013<br />
Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
Plates from coils<br />
Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Normal Strength<br />
B.O.S. / Con Cast<br />
Slabs<br />
Blooms<br />
Normal Strength<br />
As below<br />
carbon, carbon-manganese 220<br />
A, B 20<br />
A, B 20<br />
As below<br />
carbon, carbon-manganese 250<br />
carbon, carbon-manganese 400<br />
A, B 20<br />
Semi Finished products Carbon <strong>and</strong> Carbon-manganese, Fine Grain Al, slabs to 2100mm wide, to 9000mm long; Blooms to 400mm wide, to 12m long, for further<br />
processing for Rolled Products.<br />
CHANGSHU LONGTENG SPECIAL STEEL CO., LTD. Jiangyin<br />
No. 9 Jusha Road<br />
Meili Town<br />
Changshu City<br />
Jiangsu Province 21551<br />
Sections<br />
Normal Strength<br />
Higher Strength<br />
Tel: +86 0512 5206 1085 Fax: +86 0512 5266 1141 Email: mailto: lttg@lttg.cn Web: http://www.lttg.cn<br />
Certificate #: MD00/3275/0003/1 Expiry date: 11/10/2012 #ENHANCED SURVEY#<br />
CHANGSHU LONGTENG SPECIAL STEEL CO., LTD. Jiangyin<br />
118 Hualian Road,<br />
Tonggang Industrial Park,<br />
Meili Town, Changshu City,<br />
Jiangsu Province 215511<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
E.A.F. / Con Cast<br />
Blooms<br />
Normal Strength<br />
Higher Strength<br />
A, B, D 14<br />
AH27S, AH32, AH36 14<br />
As below<br />
Normal Strength, Higher Strength 260<br />
A, B 20<br />
AH27S, AH32, AH36 20<br />
Tel.:+86 512 5266 1284 Fax.: +86 512 52661284 Email: mailto: lttg@lttg.cn Web: http://www.lttg.cn<br />
Blooms as semi finished products nominal 340mm width x nominal 12000mm length to the above maximum thickness are approved for further processing for<br />
rolled products.<br />
Certificate #: MD00/3976/0001/1 Expiry date: 08/12/2014<br />
CISCO Wuhan<br />
Chongqing Iron <strong>and</strong> Steel Co., Ltd.<br />
Dadukou<br />
Steelmaking<br />
Sections<br />
Bars<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Chain Cable Stock<br />
Chongqing<br />
Tel: +86 23 6884 2716 Fax: +86 23 6884 6465 Email: mailto:ergetu@126.com Web: http://www.cqgt.com<br />
Certificate Number: MD00/0307/0009/1 Expiry: SUSPENDED<br />
Page<br />
8<br />
As below<br />
A, B, D 15<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 15<br />
U1, U2, U3 100<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
CISCO Wuhan Steelmaking<br />
B.O.S. / Con Cast<br />
As below<br />
Semi-Finished Slabs<br />
Normal strength, Higher Strength 300<br />
Plates<br />
Normal Strength<br />
A, B, D, E 80<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
80<br />
Boiler & Pressure Vessel 360AR, 410AR, 460AR 40<br />
360FG, 410FG, 460FG, 490FG 80<br />
Chongqing Iron <strong>and</strong> Steel Co., Ltd.<br />
Jiagnan Town (4100 Mill)<br />
Changshou District<br />
Chongqing<br />
Tel: +82 623 6884 2716 Fax: +82 623 6884 9574 Email: cq_tzg775@163.com Web: http://www.cggf<br />
Slabs as semi finished products nominal 2500mm width x 12000mm length to the above maximum thickness are approved for further processing for rolled<br />
products.<br />
Plates with specified through thickness properties may be accepted with the suffix Z25 or Z35 applied to Normal Strength Grades in the Normalised supply<br />
condition <strong>and</strong> Normalizing Rolled supply condition.<br />
Plates with specified through thickness properties may be accepted with the suffix Z25 or Z35 applied to Higher Strength Grades in the Normalised supply<br />
condition <strong>and</strong> in the TM supply condition .<br />
Certificate Number: MD00/3763/0004/1 Expiry date: 29/03/2013<br />
CISCO Wuhan<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Chongqing Iron <strong>and</strong> Steel Co., Ltd.<br />
Jiagnan Town (2700 Mill)<br />
Tel: +82 623 6887 3543 Fax: +82 623 6887 3543 Email: zyflwy@163.com Web: http://www.cggf<br />
Plates with specified through thickness properties may be accepted with the suffix Z25 or Z35 applied to all Grades <strong>and</strong> supply conditions.<br />
Certificate Number: MD00/3982/0002/1 Expiry: 26/01/2015<br />
DAYE SPECIAL STEEL CO., LTD. Wuhan<br />
Huangshi City<br />
Hubei Province<br />
Post code: 435001<br />
Tel: +86 714 6297888 Fax: +86 714 6297781<br />
Email: chenlei7483@163.com<br />
Certificate #: MD00/2493/0005/1 Expiry date: 13/08/2014<br />
DONGBEI SPECIAL STEEL GROUP Dalian<br />
BEIMEN SPECIAL STEEL CO., LTD.<br />
Fularji District<br />
Steelmaking<br />
Bars<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Qiqihar City<br />
Heilongjiang Province<br />
Tel: +86 452 6801920 Fax: +86 452 6801496 Email: mailto:lhy999@163.net<br />
Certificate #: MD00/2907/0001/1 Expiry date: 30/07/2014<br />
DONGBEI SPECIAL STEEL GROUP Dalian<br />
FUSHUN SPECIAL STEEL CO. LTD.,<br />
East No 8 Anshan Road,<br />
Wanghua District,<br />
Fushun City,<br />
Liaoning Province<br />
Tel No: +86 413 668 9161-3668 Fax no: +86 413 6674090<br />
Email:<br />
Web: www.dtsteel.com<br />
Certificate No MD00/3945/0001/1<br />
FUJIAN PROVINCIAL SANSTEEL (GROUP) CO.,<br />
LTD.<br />
Guangzhou<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Page<br />
E.A.F./Ingot/Con Cast<br />
Structural<br />
Machinery<br />
Chain Cable Stock<br />
B.O.S. / Con Cast<br />
E.A.F./Ingot/Con Cast<br />
Ingots<br />
Blooms/Billets<br />
Bars<br />
Structural<br />
Chain Cable Stock<br />
EAF/LRF/VD/Ingot<br />
Ingots<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
9<br />
A, B, D, E 40<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 40<br />
EH27S, EH32, EH36<br />
360AR, 410AR, 360FG, 410FG, 460FG, 490FG, 40<br />
510FG<br />
As below<br />
carbon, carbon-manganese 190<br />
carbon, carbon-manganese, alloy 190<br />
U1, U2, API-2F 110<br />
U3, R4 160<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese<br />
carbon, carbon-manganese 5<br />
carbon, carbon-manganese 280<br />
carbon, carbon-manganese 200<br />
carbon, carbon-manganese 200<br />
U1, U2, U3 130<br />
Carbon, Carbon-manganese, Alloy 27<br />
carbon, carbon-manganese, alloy 27<br />
As below<br />
Normal strength, Higher Strength 250<br />
A, B 36<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 30<br />
360FG, 410FG, 460FG, 490FG, 510FG 30<br />
360, 410 36<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
Middle Gongyezhong Road<br />
Meilie District<br />
Sanming City<br />
Fujian Province<br />
Tel: +86 598 8205936 Fax: +86 598 8205138<br />
Email: hic099@126.com<br />
Web: www.fjsg.com.cn<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Certificate #: MD00/3587/0004/1 Expiry date: 27/04/2015<br />
GUANGXI LIUZHOU Guangzhou<br />
IRON & STEEL (GROUP) COMPANY<br />
117 Beique<br />
Liuzhou<br />
Guangxi<br />
Steelmaking<br />
Plates<br />
Hot Rolled Coil<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Tel: +86 (0)772 2592132 Fax: +86 (0)772 2592784 Email mailto:lspzk@163.com Web http://www.liuzousteel.com<br />
Certificate #: MD00/2632/0006/1 Expiry date: 02/01/2015<br />
HANBAO IRON & STEEL CO. LTD (HANSTEEL<br />
GROUP)<br />
232,Fuxing Road,<br />
H<strong>and</strong>an,<br />
Hebei. 056015<br />
Tel +86 310 2093287 Fax No. + 86 310 2093606<br />
Wuhan<br />
Certificate No MD00/3874/0001/ 1 Expiry Date 10/01/2014<br />
HEBEI IRON & STEEL CO., LTD. Wuhan<br />
H<strong>and</strong>an Branch<br />
232 Fuxing Road<br />
H<strong>and</strong>an City<br />
Hebei Province<br />
056015<br />
Tel: +86 310 6072202 Fax: +86 310 6074661<br />
Email mailto:longzhengmin@136.com<br />
Certificate #: MD00/1970/0007/1 Expiry date: 05/03/2013<br />
HEBEI IRON & STEEL GROUP Dalian<br />
YANSHAN IRON & STEEL Co., Ltd.<br />
The West Side <strong>of</strong> Qianan Railway Station<br />
Qianan City<br />
Hebei Province (064403)<br />
Tel: +86 315 7769 566 Fax: +86 315 7769 566<br />
Certificate #: MD00/3648/0002/1 Expiry date: 08/06/2015<br />
HEBEI JINGYE CUT DEAL CO. LTD., Dalian<br />
N<strong>and</strong>ian Town<br />
Pingshan County<br />
Shijiazhuang City<br />
Hebei Province<br />
Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
Plates from coils<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Tel No +86 311 8287 3953 Fax No +86 311 82873988 Mob +86 158 3111 8888<br />
Email jingye@hbjyjt.com<br />
Web www.hbjyjt.com<br />
Certificate No MD00/4022/0001/1 Expiry Date 09/05/2015<br />
Page<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
B.O.S. / Con Cast<br />
Slabs<br />
Blooms/Billets<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
B.O.S. / Con Cast<br />
Billets<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
10<br />
As below<br />
A, B 36<br />
AH27S, AH32, AH36 36<br />
A, B 12<br />
As below<br />
As below 250<br />
A, B, D 18<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 18<br />
A, B, D 18<br />
AH27S, DH27S, AH32, DH32, AH36, DH36 18<br />
As below<br />
As below<br />
As below<br />
A, B, D, E 50<br />
AH27S, DH27S, EH27S 38<br />
AH32, AH36, DH32, DH36, EH32, EH36 50<br />
360AR, 410AR 25<br />
360FG, 410FG, 460FG, 490FG, 510FG 50<br />
As below<br />
A, B 150<br />
As below 220<br />
Normal strength, Higher Strength 220<br />
A, B, D 30<br />
AH27S, AH32, AH36, DH32, DH36 30<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
HEBEI JITAI SPECIAL STEEL GROUP CO., LTD. Dalian Steelmaking<br />
E.A.F. / Con Cast<br />
As below<br />
Sections<br />
Normal Strength<br />
A, B, D 20<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 20<br />
Bars<br />
Normal Strength<br />
A, B 38<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 38<br />
Feng Village<br />
Lincheng County<br />
Xingtai City<br />
Tel +86 319 7018893 Fax +86 319 3033326<br />
Email: mailto:13780444117@vip.sohu.com<br />
Web: htpp://www.jitaichina.cn<br />
Certificate #: MD00/3116/0007/1 Expiry date: 07/11/2013<br />
HENGYANG VALIN STEEL TUBE CO., LTD. Wuhan<br />
No. 10 Dalixincun<br />
Hengyang City<br />
Hunan Province 421001<br />
Tel: +86 734 8872311 Fax: +86 734 8872322 Web: www.hysteeltube.com<br />
Certificate #: MD00/3098/0001/1 Expiry date: 06/08/2013<br />
HUNAN VALIN LIANYUAN STEEL CO., LTD. Wuhan<br />
Huangnitang, Loudi<br />
Hunan Province<br />
Post Code: 417009<br />
Tel +738 8661473 Fax +7388663570<br />
Email: pmy@lysteel.com<br />
web: www. lysteel.com<br />
Certificate #: MD00/3999/0001/ Expiry date: 06/03/2015<br />
JIANGMEN XINHUI YILI SECTION STEEL MILL<br />
CO., LTD.<br />
Xinhui Shuangshui Industry Development Zone<br />
Xinhui City<br />
Guangdong Province<br />
Post zip: 529153<br />
Guangzhou<br />
Tel: +86 750 6417718 Fax: +86 750 9417728<br />
Certificate #: MD00/2842/0004/1 Expiry date: 07/11/2013<br />
JIANGSU SHAGANG GROUP Nanjing<br />
HUAIGANG SPECIAL STEEL CO., LTD<br />
No. 53 Huagong Road<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
Plates from coils<br />
Sections<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Huai'an City<br />
Jiangsu Province<br />
Tel +81 517 83036135 Fax +81 517 83631344 Email mailto:8865525@sina.com<br />
Certificate #: MD00/3240/0002/1 Expiry date: 14/06/2012<br />
JIANGSU SHAGANG GROUP CO., LTD Jiangyin<br />
Hongfa Steel Plant<br />
Steelmaking Plant Number 1<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Con Cast<br />
Billets<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Normal Strength<br />
Normal Strength<br />
B.O.S. / Con Cast<br />
E.A.F. / Con Cast<br />
Blooms/Billets<br />
Structural<br />
Machinery<br />
Chain Cable Stock<br />
B.O.S. / Con Cast<br />
Slabs<br />
As below<br />
carbon, carbon-manganese 330<br />
As below<br />
carbon, carbon-manganese 230<br />
A, B, D 25<br />
A, B, D 25<br />
A, B 12<br />
As below<br />
As below<br />
carbon, carbon-manganese 200<br />
carbon, carbon-manganese 100<br />
carbon, carbon-manganese 92<br />
U2, U3 100<br />
As below<br />
carbon, carbon-manganese 320<br />
Jinfeng Town<br />
Zhangjiagang City<br />
Jiangsu Province 215625<br />
Tel: +86 512 5856 8791 Fax: +86 512 5855 8900 Email mailto: ctoec@shagang.cn Web http://www.sha-steel.com<br />
Approval covers for con cast slabs to nominal sizes 2065mm wide x 9000mm long to the above maximum thickness for further processing for rolled products.<br />
Certifcate Number: MD00/3127/0006/1 Expiry date: 28/10/2013<br />
JIANGSU SHAGANG GROUP CO., LTD Jiangyin<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
A, B, D, E 60<br />
AH27S, AH32, AH36, AH40, DH27S, DH32, 60<br />
DH36, DH40, EH27S, EH32, EH36, EH40, FH27S,<br />
FH32, FH36, FH40<br />
360AR, 410AR, 460AR, 360FG, 410FG, 460FG,<br />
490FG, 510FG<br />
Hongfa Steel Plant<br />
Steel Plate Mill Line No. 1<br />
Jiangsu Province, 215625<br />
Tel +86 0512 58568791 Fax: +86 0512 58550818 Email: mailto:ctotec@shagang.cn Web: http://www.sha-steel.com<br />
Plates in Grades A <strong>and</strong> B Fine Grain Al+Ti in the Normalising Rolled condition maximum thickness 60.0mm are restricted to the thickness range 40.0 to<br />
60.0mm.<br />
Plates in Grades D <strong>and</strong> E Fine Grain Al+Ti+Nb in the TM+Acc condition maximum thickness 60.0mm are restricted to the thickness range 40.0 to 60.0mm.<br />
Plates in the Normalizing Rolled condition <strong>and</strong> the TM+Acc condition are restricted to a maximum width <strong>of</strong> 4150mm.<br />
Certificate No. MD00/3388/0005/1 Expiry date: 28/10/2013<br />
Page<br />
11<br />
40<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
JIANGSU SHAGANG GROUP CO., LTD Jiangyin Plates<br />
Normal Strength<br />
A, B, D, E 60<br />
Higher Strength<br />
AH27S, AH32, AH36, AH40, DH27S, DH32,<br />
DH36, DH40, EH27S, EH32, EH36, EH40, FH27S,<br />
FH32, FH36, FH40<br />
60<br />
Boiler & Pressure Vessel<br />
360AR, 410AR, 460AR, 360FG, 410FG, 460FG,<br />
490FG, 510FG<br />
Hongfa Steel Plant<br />
Steel Plate Mill LIne No. 2<br />
Tel +86 0512 5856 8800 Fax: +86 0512 5855 0818 Email: mailto:info@sha-steel.com Web: http://www.sha-steel.com<br />
Plates in the Normalizing Rolled are restricted to a maximum width <strong>of</strong> 4650mm condition <strong>and</strong> in the TM+Acc condition are restricted to a maximum width <strong>of</strong><br />
4150mm.<br />
Plates in the Normalizing Rolled condition <strong>and</strong> the TM+Acc condition are restricted to a maximum width <strong>of</strong> 4150mm.<br />
Certificate No. MD00/3913/0003/1 Expiry date: 25/05/2014<br />
JIANGSU SHAGANG GROUP CO., LTD Jiangyin Steelmaking<br />
B.O.S. / Con Cast<br />
As below<br />
Semi-Finished Slabs<br />
carbon, carbon-manganese 320<br />
Hongfa Steel Plant<br />
Steelmaking Plant Number 2<br />
Jiangsu Province 215625<br />
Tel: +86 512 5856 8791 Fax: +86 512 5855 8900 Email mailto: ctoec@shagang.cn Web http://www.sha-steel.com<br />
Approval covers for con cast slabs to nominal sizes 2065mm wide x 9000mm long to the above maximum thickness for further processing for rolled products.<br />
Certifcate Number: MD00/3127/0005/1 Expiry date: 24/05/2014<br />
JIANGSU SUNAN SPECIAL EQUIPMENT GROUP<br />
CO., LTD.<br />
BAIDANGQIAO<br />
TONGGANG ROAD<br />
CHANGSHU<br />
JIANGSU<br />
Jiangyin<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Ingot<br />
Ingots<br />
As below<br />
carbon, carbon-manganese, alloy 24<br />
Tel: +86 512 5263 1888 / 1908 Fax: +86 512 5263 7910 email: 52631569@163.com Web: http://snzbjt.com<br />
Ingots as semi finished products nominal 1170/1290mm diameter x nominal 3000mm long to the above maximum weight are approved for further processing<br />
for forgings<br />
Certificate Number: MD00/3583/0002/1 Expiry: 01/11/2012<br />
JIANGYIN BOFENG IRON & STEEL CO., LTD. Jiangyin Sections<br />
Normal Strength<br />
A, B 30<br />
Huaxicun Industrial Zone<br />
Jiangyin City<br />
Jiangsu Province<br />
Higher Strength<br />
AH27S, AH32 30<br />
Tel: +86 510 8621 7672 Fax: +86 510 8621 7672 Email: <strong>of</strong>fice2@b<strong>of</strong>engsteel.com Web: http://www.b<strong>of</strong>engsteel.cn<br />
The approved sections are in the form <strong>of</strong> universal flats nominal widths
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
297, Bin Jiang East Road<br />
Jiangyin City<br />
Jiangsu province 214429<br />
Tel: +86 510 6193388-6165 Fax: +86 510 6195042 Email: mailto:jyxctg@public1.wx.js.cn Web: http://www.jyxc.com<br />
Slabs as Semi-Finished Products to the above maximum thickness, nominal 2600mm width <strong>and</strong> nominal 12000mm length are approved for further processing for<br />
rolled products.<br />
Bars as Semi-Finished Products in the As Cast condition to maximum diameter as stated grades are accepted for further processing for forgings.<br />
Alloy Grade Bars as Semi-Finished Products in the As Rolled condition to maximum diameter <strong>of</strong> 280mm are accepted for further processing for forgings.<br />
Alloy grade bars as Semi-finished Products are accepted for approved applications, Grade 34Mn2V to 230mm maximum diameter for further processing for gas<br />
cylinders (Normalised heat treatment required), Grade 42CrMo to 300mm maximum diameter for further processing for marine structural applications<br />
(Quenched <strong>and</strong> Tempered heat treatment required).<br />
Bars for mooring chain cable grades are supplied to the following specifications;<br />
R3 - R30Mn2, R3S - 28MnCrMo, R4 - 22MnCrNiMo.<br />
The supply <strong>of</strong> mooring grade chain cable bars is restricted to the following sizes for the detailed chain manufacturers;<br />
Zhenjiang Anchor Chain Factory - Grades R3 <strong>and</strong> R3S to 105mm diameter, Grade R4 to 160mm diameter.<br />
Jiangsu Asian Star Anchor Chain Cable Co. Ltd - Grades R3 <strong>and</strong> R3S to 160mm diameter, Grade R4 to 135mm diameter.<br />
Liawu Steel Zibo Anchor Chain Cable Co. Ltd Qingdao Branch - Grades R3, R3S <strong>and</strong> R4 to 114mm diameter.<br />
Foshan Marine Anchor Chain Ltd - Grade R3S to 130mm diameter.<br />
Certificate #: MD00/2306/0013/1 Expiry date: 26/09/2013<br />
JIANGYIN XINGCHENG SPECIAL STEEL WORKS<br />
CO., LTD.<br />
Jiangyin<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
As below<br />
Normal strength, Higher Strength 300<br />
A, B, D, E 50<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
50<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 50<br />
3500 Plate Mill<br />
Jiangsu Province 214429<br />
Tel: +86 510 6193388-6165 Fax: +86 510 6195042 Email: mailto:jyxctg@public1.wx.js.cn Web: http://www.jyxc.com<br />
Plates supplied in the Normalizing Rolled condition are restricted to 3100mm width.<br />
Z35 designation for through thickness properties may be added to plates supplied in the normalized condition.<br />
Slabs as semi finished products are approved for further processing for rolled products, nominal 3200mm wide x 15,000mm long to the maximum thickness<br />
shown above.<br />
Certificate Number: MD00/3857/0003/1 Expiry date: 08/11/2013<br />
JIANGYIN XINGCHENG SPECIAL STEEL WORKS<br />
CO., LTD.<br />
Jiangyin<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
4300 Plate Mill<br />
Tel: +86 510 6193388-6165 Fax: +86 510 6195042 Email: mailto:jyxctg@public1.wx.js.cn Web: http://www.jyxc.com<br />
Plates in the Normalizing Rolled <strong>and</strong> Thermomechanical supply conditions are restricted to 3800mm maximum width.<br />
Z35 designation for through thickness properties may be added to all plates in the above supply conditions.<br />
Certificate Number: MD00/xxxx/0001/1 Expiry date: 10/01/2015<br />
JINAN IRON AND STEEL CO., LTD. Qingdao<br />
21, Gongye Bei Road<br />
Jinan, 250101<br />
Sh<strong>and</strong>ong Province<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Hot Rolled Coil<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
Tel +86 531 8868029 Fax +86 531 8982126 Email: sunjun815@163.com Web:http://www.jigang.com.cn<br />
Certificate #: MD00/0799/0012/1 Expiry date: 16/10/2013<br />
KUNSHAN DAEKYUNG STAINLESS STEEL CO.,<br />
LTD<br />
No. 66 Longdeng Road<br />
Kunshan Economy Technology Development Zone<br />
Kunshan<br />
Jiangsu Province<br />
Shanghai Port<br />
Tel:+86 512 57900998 Fax: +86 512 57700372<br />
Email: cuiyongxun020@sina.com<br />
Certificate #: MD00/3479/0002/1 Expiry date: 08/06/2014<br />
Plates<br />
Page<br />
Austenitic Stainless<br />
13<br />
A, B, D, E 80<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
80<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 80<br />
As below<br />
carbon, carbon-manganese 270<br />
E 50<br />
A, B, D 60<br />
AH27S, AH32, AH36, AH40, DH27S, DH32, 60<br />
DH36, DH40, EH27S, EH32, EH36, EH40, FH32,<br />
FH36, FH40<br />
360AR, 410AR 25<br />
360FG, 410FG, 460FG, 490FG, 510FG 60<br />
A, B 12<br />
AH27S, AH32, AH36 12<br />
304L, 316L 80<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
LAIWU STEEL GROUP LTD. YINSHAN SECTION<br />
STEEL CORPORATION<br />
Qingdao Steelmaking<br />
B.O.S. / Con Cast<br />
As below<br />
Semi-Finished Billets<br />
carbon, carbon-manganese 300<br />
No. 1, Zhagangdajie, Xinxing Road<br />
Gangcheng District<br />
Laiwu City, Shangdong<br />
Tel: +86 634 6821211 Fax: +86 634 6820824<br />
Certificate #: MD00/3855/0001/1 Expiry date: 07/11/2013<br />
MAANSHAN IRON & STEEL COMPANY LIMITED Nanjing<br />
Plates<br />
Steelmaking<br />
Plates<br />
No.8 Hongqi Road (N)<br />
Maanshan City<br />
Anhui Province PC:243000<br />
Tel: +86 555 2886 904 Fax: +86 555 2886 904 Email: mailto:yujh0805@163.com<br />
Web http://www.magang.com.cn<br />
Certificate #: MD00/0965/0006/1 Expiry date: 09/10/2012<br />
MAANSHAN IRON & STEEL COMPANY LIMITED Nanjing<br />
HEAVY MECHANICAL EQUIPMENT COMPANY<br />
Santai Road<br />
Yushan District<br />
Anhui Province 243000<br />
Tel No +86 555 2887961 Fax +86 555 2887961<br />
Email xiaominqi2010@163.com<br />
Web www.magang.com.cn<br />
Certificate No. MD00/3369/0002/1 Expiry date: 05/09/2013<br />
MINMETALS YINGKOU MEDIUM PLATE CO., LTD. Dalian<br />
No 1 Fanrong Road, Yejin Street<br />
Laobian District<br />
Yingkou City<br />
Liaoning Province<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
E.A.F. / Ingot<br />
Ingots<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Tel: 086 (0)417 3256051 Fax: 086 (0)417 3256057<br />
Email mailto:jszlb-wkyg@163.com<br />
Web :www.wkyg.com<br />
Plates with specified through thickness properties in listed grades <strong>of</strong> normal <strong>and</strong> higher strength steels.<br />
Certificate #: MD00/2585/0006/1 Expiry date: 15/09/2014<br />
NANJING IRON & STEEL CO., LTD. Nanjing<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Bars<br />
Page<br />
B.O.S. / Con Cast<br />
E.A.F. / Con Cast<br />
Slabs<br />
Blooms<br />
Billets<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Chain Cable Stock<br />
14<br />
A, B, D 60<br />
AH32, AH36, DH32, DH36 60<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 60<br />
As below<br />
A, B 25<br />
AH32, AH36, DH32, DH36 25<br />
360AR, 410AR 25<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 23<br />
As below<br />
Normal strength, Higher Strength 250<br />
A, B, D, E 50<br />
AH27S, DH27S, EH27S 40<br />
AH32, AH36, DH32, DH36, EH32, EH36 50<br />
360AR, 410AR 25<br />
360FG, 410FG, 460FG, 490FG, 510FG 50<br />
As below<br />
As below<br />
Normal strength, Higher Strength 220<br />
Normal Strength, Higher Strength 320<br />
Normal Strength, Higher Strength 150<br />
A, B, D, E 60<br />
AH40, DH40, EH40, FH27S, FH32, FH36, FH40 40<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
60<br />
360AR, 410AR, 360, 410 25<br />
360FG, 410FG, 460FG, 490FG, 510FG 60<br />
U1, U2, U3 180<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
Nanjing Works<br />
XieJiaDian<br />
Liuhe District<br />
Nanjing, Post Code: 210035<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Tel: +86 25 570 74341 Fax: +86 25 57793425 EMail mailto:zgc@njsteel.com.cn Web:http://www.nisco.com.cn<br />
Plates with specified through thickness properties may be accepted with the suffix Z35 applied to all approved grades <strong>of</strong> normal <strong>and</strong> higher strength steels.<br />
Chain cable stock in Grades U2 <strong>and</strong> U3 is intended for further processing with quenched <strong>and</strong> tempered heat treatment, bars at 80mm diameter or less are<br />
produced by BOS or EAF steelmaking, bars over 80mm diameter are produced by EAF steelmaking.<br />
Billets <strong>and</strong> blooms as semi finished products to the above maximum thickness, nominal to 480mm width <strong>and</strong> to nominal 12000mm length are approved for<br />
further processing for rolled products.<br />
Slabs as semi finished products to the above maximum thickness, nominal to 2510mm width <strong>and</strong> to nominal 4000mm length are approved for further processing<br />
for rolled products.<br />
Certificate Number: MD00/1065/0013/1 Expiry date: 12/10/2013<br />
NANYANG HANYE SPECIAL STEEL CO., LTD., Wuhan<br />
Huiche Town Industry Area,<br />
Xixia County,<br />
Nanyang City,<br />
Henan Province<br />
Tel No: +86 377 697 65211 Fax No: +86 377 697 65333<br />
Email: zhaoyuan_521@sohu.com<br />
Website: www.elongcheng.com<br />
Certificate No: MD00/3969/0001/1 Expiry date 02/01/2015<br />
PANGANG GROUP PANZHIHUA STEEL &<br />
VANADIUM CO. LTD.,<br />
Wuhan<br />
Panzhihua City,<br />
Sichuan Province,<br />
Tel No: +86 0812 339 1756 Fax No: +86 0812 339 6014<br />
Email: taoqy@163.com<br />
Web: wwwpzhsteel.com.cn<br />
Certificate No. MD00/4036/0002/1 Expiry 02/06/2015<br />
PENGZHOU SANXIN MACHINERY<br />
MANUFACTURE Co. Ltd.<br />
Sanyi<br />
Pengzhou City<br />
Sichuan Province<br />
P.C 611934<br />
Wuhan<br />
Tel: +86 28 83773044 fAX: +86 28 83773071<br />
Certificate #: MD00/3106/0003/1 Expiry date: 01/10/2013<br />
QINHUANGDAO SHOUGANG PLATE MILL CO.,<br />
LTD.<br />
Dalian<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
No. 409 Jianshe Street<br />
Qinhuangdao City<br />
Hebei Province<br />
Tel: +86 010 88296326 Fax: +86 010 88291295 email: mailto: lin@165e.com<br />
Certificate #: MD00/2097/0008/1 Expiry date: 05/07/2015<br />
QINHUANGDAO SHOUQIN METAL MATERIALS<br />
CO., LTD.<br />
Dalian<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Page<br />
B.O.S./Ingot/Con Cast<br />
Ingots<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
B.O.S. / Con Cast<br />
Slabs<br />
Billets<br />
B.O.S./E.A.F./Ingot<br />
Ingots<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
15<br />
As below<br />
carbon, carbon-manganese, alloy 48<br />
carbon, carbon-manganese, alloy 300<br />
A, B, D 100<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 100<br />
360FG, 410FG, 460FG, 490FG, 510FG 100<br />
See notes<br />
See notes<br />
See notes<br />
As Below<br />
carbon, carbon-manganese, alloy 9<br />
E 32<br />
A, B, D 35<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
32<br />
360FG, 410FG, 460FG, 490FG, 510FG 32<br />
360AR, 410AR 35<br />
carbon, carbon-manganese<br />
carbon, carbon-manganese 250<br />
D 50<br />
A, B 100<br />
AH40 40<br />
DH40, EH27S, EH32, EH36, EH40 50<br />
AH36, DH27S, DH36 80<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
China, People's Republic <strong>of</strong><br />
CO., LTD.<br />
Duzhuang<br />
Funing County<br />
Qinhuangdao<br />
Plates<br />
Zip 066326 Tel +86 010 88296326 Fax +86 010 88291295 Web http://www.shouqin.com.cn<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
All plate grades <strong>and</strong> thicknesses with through thickness properties, notations Z25 <strong>and</strong> Z35 may be added.<br />
Certificate #: MD00/3136/0006/1 Expiry date: 06/02/2014<br />
RIZHAO STEEL WIRE CO., LTD Qingdao<br />
No. 600, Yanhai Road, Rizhao<br />
Shangdong<br />
Tel: +86 633 6188656 Fax: +86 633 6188910<br />
Certificate #: MD00/3102/0002/FW Expiry date: 08/10/2010<br />
Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
Plates from coils<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Normal Strength<br />
80<br />
AH27S, AH32, DH32 100<br />
360AR, 410AR 16<br />
360, 410 32<br />
510FG 80<br />
360FG, 410FG, 460FG, 490FG 100<br />
As below<br />
carbon, carbon-manganese 230<br />
A, B 25<br />
A, B 25<br />
SGIS SONGSHAN CO., LTD Guangzhou Steelmaking<br />
B.O.S. / Con Cast<br />
carbon, carbon-manganese<br />
Semi-Finished Slabs<br />
carbon, carbon-manganese, alloy 270<br />
Billets<br />
carbon, carbon-manganese, alloy 170<br />
Plates<br />
Normal Strength<br />
A, B, D, E 60<br />
Higher Strength<br />
AH40, DH40, EH40 36<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
60<br />
Boiler & Pressure Vessel 360AR, 410AR 20<br />
360FG, 410FG, 460FG, 490FG, 510FG 60<br />
Qujiang District<br />
Shaoguan City<br />
Guangdong 512123<br />
Tel: +86 (0)751 878 5354 Fax: +86 (0)751 878 6066<br />
Email mailto:ly73@21cn.com<br />
Certificate #: MD00/2175/0008/1 Expiry date: 23/11/2012<br />
CEV is limited to a maximum <strong>of</strong> 0.45% for as rolled <strong>and</strong> nomalised higher strength steels but does not apply to TM steels<br />
SHANDONG SHOUGUANG JUNENG SPECIAL<br />
STEEL CO, LTD.<br />
Qingdao<br />
No. 9 Tegang Road<br />
Shouguang, Shangdong Province<br />
262711<br />
Tel +86 532 5186057 Tel+86 532 5186789<br />
Certificate #: MD00/3260/0004/1 Expiry date: 22/09/2015<br />
SHANGHAI HEAVY MACHINERY PLANT CO.,<br />
LTD.<br />
1800 Jiangchuan Road<br />
Minhang District<br />
Shanghai<br />
200245<br />
Shanghai Port<br />
Steelmaking<br />
Bars<br />
Steelmaking<br />
B.O.S. / Con Cast<br />
Structural<br />
Machinery<br />
Chain Cable Stock<br />
EAF/LRF/VD/Ingot<br />
Tel: +86 21 54724065ext 2027 Fax: +86 21 54721007 Email mailto:chenzq@sechig.com Web http://www.shmp.sh.com<br />
Including ingots<br />
Certificate #: MD00/1345/0001/1 Expiry date: 25/07/2014<br />
SHANXI TAIGANG STAINLESS STEEL CO., LTD. Dalian<br />
Steelmaking<br />
Plates<br />
Page<br />
E.A.F./A.O.D./Con Cast<br />
Austenitic Stainless<br />
Duplex Stainless<br />
16<br />
As below<br />
carbon, carbon-manganese 130<br />
carbon, carbon-manganese 130<br />
U1, U2, U3 130<br />
Carbon, Carbon-manganese, Alloy 200<br />
As below<br />
304L, 316L 20<br />
UNS S31803 20<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
Stainless Steel Hot Rolling Mill<br />
Jiancaoping Street No. 2<br />
Taiyuan<br />
030003<br />
Taiyuan<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Tel No: +86 351 3012029 Fax No: +86 351 3017893 Mob: 13503502921<br />
Email: wangcd@tisco.com.cn<br />
Web: http://tgbx.tisco.com.cn<br />
Certificate No. MD00/3185/0006/1 Expiry date: 18/08/2014<br />
SHANXI TAIGANG STAINLESS STEEL CO., LTD. Dalian<br />
Hot Strip Mill<br />
Jiancaoping Street No. 2<br />
Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
Plates from coils<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
Boiler <strong>and</strong> Pressure Vessel<br />
As below<br />
Normal strength, Higher Strength 200<br />
A, B, D 25<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 25<br />
360FG, 410FG 25<br />
A, B, D 25<br />
AH27S, DH27S, AH32, DH32, AH36, DH36 25<br />
410 FG, 360 FG 25<br />
Tel: +86 351 3012029 Fax: +86 351 3017893<br />
Email: wangcd@tisco.com.cn Web: http: //tgbx.tisco.com.cn<br />
Slabs as semi finished products 2310mm nominal width <strong>and</strong> 12000mm nominal length to the above maximum thickness are approved for further processing for<br />
rolled products.<br />
Certificate #: MD00/3507/0002/1 Expiry date: 30/07/2014<br />
SHANXI TAIGANG STAINLESS STEEL CO., LTD. Dalian<br />
Linfen Heavy Plate Mill<br />
Qiaodong Street No.3<br />
Linfen City<br />
Shanxi Province<br />
Tel: +86 351 3017667 Fax: +86 351 3017893<br />
Email: yangfei@tisco.com.cn<br />
Web: http:// www.tisco.com.cn<br />
Certificate No MD00/3688/0004/1 Expiry date 07/07/2015<br />
SHIJIAZHUANG I & S CO., LTD. Dalian<br />
No. 363 Heping E Road<br />
Shijiazhuang City<br />
Hebei Province<br />
Tel: +86 (0)311 86913304 Fax: +86 (0)311 86913368<br />
Email: renyd_1@126.com<br />
Certificate #: MD00/3315/0002/1 Expiry date: 07/12/2013<br />
SHOUGANG JINGTANG UNITED IRON & STEEL<br />
CO., LTD.<br />
Ca<strong>of</strong>eidian Industrial Zone, Tangshan<br />
Post Code: 063200<br />
Dalian<br />
Plates<br />
Steelmaking<br />
Bars<br />
Steelmaking<br />
Semi-Finished<br />
Tel: +86 315 8872636 Fax: +86 315 8872606 Email: mailto:uha_w@126.com<br />
Certificate #: MD00/3820/0001/1 Expiry date: 21/11/2013<br />
SHOUGANG QIAN'AN IRON & STEEL CO., LTD.,<br />
HEBEI<br />
Dalian<br />
Hot Rolled Coil<br />
Plates from coils<br />
Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
Plates from coils<br />
Page<br />
Normal Strength<br />
Higher Strength<br />
Austenitic Stainless<br />
Duplex Stainless<br />
B.O.S. / Con Cast<br />
Structural<br />
Machinery<br />
Chain Cable Stock<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
17<br />
A, B, D 40<br />
AH32, AH36, DH32, DH36 40<br />
304L, 316L, 304*, 316* 40<br />
UNS S31803 40<br />
carbon, carbon-manganese<br />
carbon, carbon-manganese 150<br />
carbon, carbon-manganese 150<br />
U1, U2, U3 150<br />
As below<br />
carbon, carbon-manganese 250<br />
A, B, D 18<br />
AH32, AH36, DH32, DH36 18<br />
A, B, D 18<br />
AH32, DH32, AH36, DH36 18<br />
As below<br />
carbon, carbon-manganese, alloy 230<br />
A, B, D 18<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 18<br />
360FG, 410FG, 460FG, 490FG, 510FG 18<br />
A, B, D 18<br />
AH27S, DH27S, AH32, DH32, AH36, DH36 18<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
Binhe Village<br />
Yang-dian-zi Town<br />
Qian'an<br />
Hebei, 064404<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Tel: +86 315 7703138 Fax: +86 315 7703139<br />
Email: mailto:zhengzhihui@sgqg.com<br />
Web wwwsgqg.com<br />
Certificate #: MD00/3488/0003/1 Expiry date: 09/07/2014<br />
SINOSTEEL (TIANJIN) STEEL PROCESSING CO.LTD Dalian<br />
No 700 Hexing Road<br />
Xin Xing Village,<br />
Dongli District,<br />
Tianjin<br />
Tel No 0086 22 24982876 Fax No. 0086 22 24981723<br />
Email yunqidi@163.com<br />
Web tianjin.sinosteel.com<br />
Cert No. MD00/3656/0002/1 Expiry date: 08/07/2015<br />
Not approved for heat treatment<br />
SPECIAL STEEL BRANCH OF Wuhan<br />
INNER MONGOLIA NORTH HEAVY INDUSTRIES GROUP CORP L<br />
Binggong Road, Qingshan District<br />
Baotou City<br />
Inner Mongolia<br />
014033<br />
Plates from coils<br />
Steelmaking<br />
Semi-Finished<br />
Normal Strength<br />
Higher Strength<br />
E.A.F. / Ingot<br />
Including semi-finished as-forged bars to 8.5 tonnes in carbon, carbon-manganese <strong>and</strong> alloy steel for further process <strong>of</strong> forge<br />
Tel: +86 0472 338 6106<br />
Fax: +86 0472 332 2346<br />
Certificate #: MD00/3099/0004/1 Expiry date: 08/08/2013<br />
SUQIAN NANJING IRON & STEEL Nanjing<br />
JINXIN STEEL ROLLING Co., Ltd.<br />
No.89 Jingshan Road,<br />
Suyu District,<br />
Suqian City, Jiangsu,<br />
Sections<br />
Tel; +86 527 844 53907 Fax: +86 527 844 80094 Email: hzefeng@yahoo.com.cn<br />
Certificate: MD00/3741/0002/1 Expiry date: 17/12/2014<br />
SUZHOU SUXIN SPECIAL STEEL CO., LTD. Shanghai Port<br />
Huashan, Tong An, Suzhou<br />
Jiangsu<br />
Post Code: 215151<br />
Tel: +86 0512 8887 7088 Fax: +86 0512 88877815<br />
Certificate #: MD00/3492/0002/1 Expiry date: 14/07/2014<br />
TAI YUAN HEAVY INDUSTRY CO. LTD. Wuhan<br />
No.53, Yuhe Street,<br />
Wan Bailin Dristrict, Taiyuan City,<br />
Shanxi Province, 030024,<br />
Tel +86 351 636 6770 Fax: +86 351 636 6750<br />
Email: litubin_9365@yahoo.com.cn<br />
Web: www.tyhi.com.cn<br />
Certificate #: MD00/3412/0002/1 Expiry date: 03/10/2013<br />
TANGSHAN HEAVY PLATE CO., LTD. Dalian<br />
Lingang Industrial Park<br />
Leting County,<br />
Tangshan City,<br />
Hebei<br />
Tel No: +86 315 4958304 Fax No: +86 315 4959038<br />
Email tszhaoyujun@163.com<br />
Certificate #: MD00/3475/0003/1 Expiry date: 01/06/2014<br />
TANGSHAN XINXIN SPECIAL STEEL CO. LTD Dalian<br />
Steelmaking<br />
Bars<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Sections<br />
Page<br />
Ingots<br />
Normal Strength<br />
Higher Strength<br />
E.A.F. / Con Cast<br />
Chain Cable Stock<br />
E.A.F. / Ingot<br />
Ingots<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
18<br />
A, B, D 18<br />
AH27S, DH27S, AH32, DH32, AH36, DH36 18<br />
As below<br />
carbon, carbon-manganese, alloy 8<br />
A, B 15<br />
AH32, AH36 15<br />
As below<br />
U1, U2, U3 120<br />
As below, carbon, carbon-manganese<br />
carbon, carbon-manganese 36<br />
As below<br />
carbon, carbon-manganese 250<br />
A, B, D 38<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 38<br />
360FG, 410FG, 460FG, 490FG, 510FG 38<br />
A, B 14<br />
AH32, AH36 14<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
No. 95 Middle Street<br />
Bencheng Town, Luannan County<br />
Tangshan City<br />
Hebei Province<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Tel: +86 0315 412 5016; Fax: +86 0315 412 5016<br />
Email:mailto: mengfen123@163.com<br />
Web: www.xxtg.cn<br />
Certificate #: MD00/3468/0004/1 Expiry date: 18/05/2011<br />
TIANJIN IRON AND STEEL GROUP CO. LTD. Dalian<br />
398 Jintang Road<br />
Dongli District<br />
Tianjin<br />
Tel:+86 22 24706052 Fax: +86 22 24706052<br />
Email: mailto:TGRZ166@yeah.net<br />
web: www.tgsteel.com<br />
Certificate #: MD00/3485/0003/1 Expiry date: 02/07/2014<br />
TIANJIN PIPE (GROUP) CORPORATION Dalian<br />
Jintang Road<br />
300301<br />
Tel:+86 22 24802227 Fax: +86 22 24801291<br />
Certificate #: MD00/3361/0002/1 Expiry date: 29/07/2013<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Steelmaking<br />
Semi-Finished<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
E.A.F. / Con Cast<br />
Blooms/Billets<br />
TIANJIN YONGHENG ENTERPRISE CO., LTD.<br />
Daqiuzhuang Town Industrial Zone<br />
Dalian Sections<br />
Normal Strength<br />
Higher Strength<br />
Tel:+86 (0)2228899290 Fax: +86(0)2260730999 Email:mailto:wy8770@163.com Web:http://www.tjyhsy.com<br />
Certificate #: MD00/3953/0001/1 Expiry date: 25/09/2014<br />
TONGYU HEAVY INDUSTRY Co., Ltd Qingdao<br />
High & New Technology Industry Development Zone,<br />
Yucheng City,<br />
Dezhou City,<br />
Sh<strong>and</strong>ong Province,<br />
Tel: +86 534 7520690 Fax: +86534 7521470<br />
Certificate No. MD00/3998/00001/1 Expiry date:01/03/2012<br />
WISCO Wuhan<br />
Wuhan Iron <strong>and</strong> Steel Co., Ltd.<br />
Changqian<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Plates<br />
Qingshan<br />
Wuhan<br />
Tel: +86 27 8689 8489 Fax: +86 27 8689 3482<br />
E-mail: Mailto: Liumd660@sohu.com Web: http://www.wisco.com.cn<br />
Certificate #: MD00/1683/0009/1 Expiry date: 21/11/2013<br />
WISCO ECHENG IRON & STEEL CO., LTD. Wuhan<br />
Hot Rolled Coil<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Wuchang Dadao No. 105<br />
Ezhou City<br />
Hubei Province<br />
Tel: +86 711 3233225 Fax: +86 711 3233225 Email mailto: chencaiyuan@sina.com<br />
Certificate #: MD00/3931/0002/1 Expiry date: 05/07/2014<br />
WUHAN HEAVY INDUSTRY Wuhan<br />
CASTING AND FORGING CO., LTD.<br />
1 Wudong Street<br />
Quingshan District<br />
Wuhan<br />
Hubei<br />
Tel No: +86 027 6886 1813 Fax No: +86 027 6886 1810<br />
Email wh471zg@163.com<br />
Web www.whzg.com.cn<br />
Certificate No: MD00/1681/0001/1 Expiry date: 05/07/2014<br />
Semi-Finished<br />
Page<br />
E.A.F. / Ingot<br />
Ingots<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ingots<br />
19<br />
As below<br />
carbon, carbon-manganese, alloy 250<br />
A, B, D 38<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 50<br />
carbon, carbon-manganese<br />
carbon, carbon-manganese 310<br />
A, B 15<br />
AH32, AH36 15<br />
carbon, carbon-manganese, alloy 70<br />
carbon, carbon-manganese, alloy 70<br />
As below<br />
A, B, D, E 50<br />
AH32, AH36, DH32, DH36, EH32, EH36 50<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 50<br />
A, B, D 25<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 25<br />
360, 410 12<br />
As below<br />
As below, Normal strength, Higher Strength 300<br />
A, B, D 50<br />
AH32, AH36, DH32, DH36, EH32, EH36 50<br />
360FG, 410FG, 460FG, 490FG, 510FG 50<br />
carbon, carbon-manganese, alloy 100<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
WUYANG IRON & STEEL COMPANY LTD. Wuhan Steelmaking<br />
E.A.F./Ingot/Con Cast As below<br />
Plates<br />
Normal Strength<br />
A, B, D, E 150<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
100<br />
Boiler & Pressure Vessel 360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 100<br />
Wugang City<br />
Henan Province<br />
P.N: 462500<br />
Tel: +86 375 811 1230 Fax: +86 375 811 4006<br />
Plates with specified through thickness properties in listed grades <strong>of</strong> normal <strong>and</strong> higher strength steels.<br />
Certificate #: MD00/2044/0008/1 Expiry date: 14/07/2014<br />
WUYANG IRON & STEEL COMPANY LTD. Wuhan<br />
Wuyang New Wide <strong>and</strong> Heavy Steel Plate Co Ltd<br />
Wugang City,<br />
Henan Province,<br />
PN 462500<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Tel No. +86 375 8111230 Fax No. +86 375 8114006 Email to: wghangweijun@163.com<br />
Plates with specified through thickness properties in listed grades <strong>of</strong> normal <strong>and</strong> higher strength steels<br />
Certificate No. MD00/3714/0002/1 Expiry Date 14/07/2014<br />
XINING SPECIAL STEEL CO., LTD. Wuhan<br />
No. 52 Chaidamu West Road<br />
Xining<br />
Qinghai<br />
Tel: 0086 0971 529 9407 Fax: 0086 0971 529 9248<br />
Email: wlyqh888@sina.com<br />
Web: www.xntg.com<br />
Certificate #: MD00/3093/0006/1 Expiry date: 11/06/2013<br />
XINYU IRON & STEEL CO. LTD. Wuhan<br />
1 Yejin Road<br />
Xinyu City<br />
Jiangxi Province 338001<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Sections<br />
Tel: 0790 629 4433 Fax: 0790 629 3826<br />
Email: xy6279918@126.com<br />
Web: www.xinsteel.com.cn<br />
All grades with specified through thickness properties, designation to Z35 may be added<br />
Certificate #: MD00/3093/0007/1 Expiry date: 11/06/2013<br />
XISC - HUNAN VALIN XIANGTAN Wuhan<br />
IRON & STEEL CO., LTD.<br />
Yuetang District,<br />
Xiangtan City,<br />
Hunan Province,<br />
<strong>Approved</strong> for Z25 & Z35 grades.<br />
Tel +86 (0)731 5865 2130 Fax +86 (0) 731 58653050<br />
Email mailto:hnxgjiazg@sohu.com<br />
Web http://www.hnxg.com.cn<br />
Certificate #: MD00/3258/0007/1 Expiry date: 08/08/2015<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Page<br />
EAF/LRF/VD/Ingot<br />
Ingots<br />
ESR Ingots<br />
Semi-finished Products<br />
B.O.S. / Con Cast<br />
E.A.F. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
20<br />
A, B, D, E 100<br />
FH32, FH36, FH40 50<br />
AH27S, AH32, AH36, AH40, DH27S, DH32,<br />
DH36, DH40, EH27S, EH32, EH36, EH40<br />
100<br />
360FG, 410FG, 460FG, 490FG, 510FG 100<br />
Carbon, Carbon-manganese, Alloy<br />
carbon, carbon-manganese, alloy 12<br />
carbon, carbon-manganese, alloy 18<br />
carbon, carbon-manganese, alloy 250<br />
See notes<br />
See notes<br />
carbon, carbon-manganese 250<br />
A, B, D, E 80<br />
FH27S, FH32, FH36, FH40 50<br />
AH27S, DH27S, DH40, EH27S, EH40 60<br />
AH32, AH36, DH32, DH36, EH32, EH36 80<br />
360AR, 410AR 20<br />
360, 410 60<br />
360FG, 410FG, 460FG, 490FG, 510FG 80<br />
A, B 14<br />
AH27S, AH32, AH36 14<br />
As below<br />
carbon, carbon-manganese, alloy 300<br />
A, B, D, E 60<br />
AH40, DH40, EH40, FH40 40<br />
FH27S, FH32, FH36 60<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
100<br />
360FG, 410FG, 460FG, 490FG, 510FG 100<br />
LTAH32, LTAH36, LTAH40, LTDH32, LTDH36,<br />
LTDH40, LTEH32, LTEH36, LTEH40, LTFH32,<br />
LTFH36, LTFH40<br />
40<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
YANTAI JIN CHENG PRECISION WIRE ROD CO.,<br />
LTD.<br />
Qingdao Steelmaking<br />
B.O.S/V.O.D./Con Cast austenitic stainless<br />
Semi-Finished Blooms/Billets<br />
austenitic stainless steel 220<br />
No. 2 Wuzhishan Road,<br />
Economic Technical Development Zone<br />
Yantai City, sh<strong>and</strong>ong Province<br />
Tel: +86 535 2166688 Fax: +86 535 2165008 Email:Jack_yen@walsin<br />
Certificate #: MD00/3992/0001/1 Expiry date: 21/02/2015<br />
YONGXING SPECIAL STAINLESS STEEL CO LTD Shanghai Port<br />
Yangjiabu,<br />
Huzhou City,<br />
Zhejiang Province<br />
Tel No. +86 572 2350629 Fax No: +86 572 2351517<br />
Email: wang _jianyong@163.com<br />
Web : www.yongxingbxg.cn<br />
Certificate No. MD00/3791/0001/1 Expiry date 07/06/2013<br />
ZHEJIANG TIANJI HEAVY INDUSTRY MACHINERY Shanghai Port<br />
CO., LTD.<br />
No. 463 Busen Road,<br />
Fengqiao Town,<br />
Zhuji City,<br />
Zhejiang Province,<br />
Tel: +86 575 8704 1127 Fax: +86 575 8704 5392<br />
web: www.zhengtian.com.cn<br />
Certificate No. MD00/4069/0001/1 Expiry Date: 23/08/2015<br />
ZHEJIANG TSINGSHAN IRON & STEEL CO.LTD. Ningbo<br />
Xiaoshi Industry Zone<br />
Wenxi Town,<br />
Qingtian,<br />
Zhejiang Province<br />
Tel No. 0086 578 6071 658 Fax No. 0086 578 6071 658<br />
Email lw@ruipt.com<br />
Web : www. zjqingshan.cn<br />
Cert no. MD00/3673/0002/1 Expiry date: 25/08/2015<br />
ZHONGPU (HANDAN) IRON AND STEEL CO.,<br />
LTD.<br />
No.1 Steel Making Plant<br />
Yangyi Town<br />
Wuan City<br />
Hebei Province, 056305<br />
Dalian<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Steelmaking<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Plates<br />
E.A.F. / Ingot<br />
Ingots<br />
Semi-finished Products<br />
EAF/LRF/VD/Ingot<br />
IF/AOD/Ingot/ConCast<br />
Ingots<br />
Blooms/Billets<br />
Billets<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Tel: +86 (0)310-5178928 Fax: +86 (0)310-5178928 Web:http//www.hbpygt.com.cn Email: mailto:15130025086@139.com<br />
web: www.hbpygt.com<br />
Certificate #: MD00/3585/0002/1 Expiry date: 27/04/2015<br />
ZHONGPU (HANDAN) IRON AND STEEL CO.,<br />
LTD.<br />
No.2 Steel Making Plant<br />
Yangyi Town,<br />
Wuan City,<br />
Dalian<br />
Tel: +86 (0)310-5178900 Fax: +86 (0)310-5178928<br />
Web:http//www.hbpygt.com.cn<br />
web: www.hbpygt.com<br />
Certificate #: MD00/4034/0001/1 Expiry date:10/06/2015<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Page<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
21<br />
austenitic stainless<br />
austenitic stainless 5<br />
austenitic stainless 110<br />
Carbon, Carbon-manganese, Alloy 16<br />
austenitic stainless steel<br />
austenitic stainless 3<br />
austenitic stainless steel 240<br />
austenitic stainless 150<br />
As below<br />
A, B, D 38<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 38<br />
360FG, 410FG, 460FG, 490FG, 510FG 38<br />
As below<br />
carbon, carbon-manganese 320<br />
A, B, D 38<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 38<br />
360FG, 410FG, 460FG, 490FG, 510FG 38<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Cuba<br />
ACINOX LAS TUNAS Havana Steelmaking<br />
E.A.F. / Con Cast<br />
Circuvalante Norte Km. 3 1/2<br />
CP75100<br />
Las Tunas<br />
Semi-Finished Billets<br />
Tel: +53 131 46801 Ext 109 Fax: +53 131 46512 Email: eduardo@acinoxtunas.co.cu Web http://www.acinoxtunas.cu<br />
Certifcate: MD00/3698/0002/1 Expiry date: 23/05/2014<br />
Czech Republic<br />
As below<br />
carbon, carbon-manganese 130<br />
ArcelorMittal Ostrava a.s. Prague Steelmaking<br />
B.O.S. / Con Cast<br />
carbon, carbon-manganese, alloy<br />
Semi-Finished Slabs<br />
carbon, carbon-manganese 150<br />
alloy 180<br />
Billets<br />
carbon, carbon-manganese, alloy 210<br />
Sections<br />
Normal Strength<br />
A, B, D 14<br />
Bars<br />
Normal Strength<br />
A, B, D 60<br />
Vratimovská 689<br />
707 02 Ostrava-Kuncice<br />
Tel: +420 59 568 4213 Fax: +420 59 668 2275 Email: mailto:radim.prochacek@arcelormittal.com Web http://www.arcelormittal.com/ostrava<br />
Certificate #: MD00/1123/0008/1 Expiry date: 12/12/2013<br />
EVRAZ VITKOVICE STEEL, a.s. Prague Steelmaking<br />
B.O.S. / Con Cast<br />
As below<br />
Semi-Finished Slabs<br />
carbon, carbon-manganese 250<br />
Plates<br />
Normal Strength<br />
A, B, D, E 100<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
100<br />
Boiler & Pressure Vessel 360FG, 410FG, 460FG, 490FG, 510FG 100<br />
Sections<br />
Normal Strength<br />
A, B, D, E 16<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
16<br />
Bars<br />
Normal Strength<br />
A, B, D, E 50<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 50<br />
709 00 Ostrava - Hulvaky<br />
Stramberska c.p. 2871/47<br />
PSC 709 00<br />
Tel: +420 59 595 5842 Fax: +420 59 595 7340 Email: mailto:miroslav.snajdr@VitkoviceSteel.com Web: http://www.vitkovicesteel.com<br />
<strong>Approved</strong> for plates with specified through thickness properties (Z35) in all grades up to 50 mm thickness.<br />
Semi-finished products in carbon <strong>and</strong> carbon-Manganese steels with fine grain: slabs to 1580mm wide to 8000mm long for further processing for rolled products<br />
Materials Quality Scheme <strong>Approved</strong> - MQS 039<br />
Certificate #: MD00/1638/0013/1 Expiry date: 07/08/2013<br />
PILSEN STEEL s.r.o. Prague<br />
Tylova 1/57<br />
316 00 Plzen<br />
Tel: +420 378 134 225 Fax: +420 378 132 058<br />
Email: karel.rau@pilsensteel.cz<br />
Web: www.pilsensteel.cz<br />
Certificate # MD00/1383/0005/1 Expiry date: 24/03/2014<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Ingot<br />
Ingots<br />
As below<br />
carbon, carbon-manganese, alloy 200<br />
SOCHOROVÁ VÁLCOVNA TZ, a.s. Prague Bars<br />
Structural<br />
carbon, carbon-manganese, alloy 300<br />
Machinery<br />
carbon, carbon-manganese, alloy 300<br />
272 01 Kladno-Drin<br />
Tel No +420 558 536 065 Fax No. +420 558 534 926<br />
Email vit.prochazka@trz.cz<br />
Web www.trz.cz<br />
Machinery grade bars with the maximum diameter <strong>of</strong> 300 mm produced from con-cast blooms may be accepted with a minimum rolling reduction <strong>of</strong> 3:1.<br />
Certificate #: MD00/2955/0005/1 Expiry date: 21/02/2015<br />
TRINECKE ZELEZARNY, a.s. Prague Steelmaking<br />
B.O.S./Ingot/Con Cast As below<br />
E.A.F./Ingot/Con Cast As below<br />
Semi-Finished Slabs<br />
carbon, carbon-manganese 140<br />
Bars<br />
carbon, carbon-manganese 525<br />
Sections<br />
Normal Strength<br />
A 50<br />
Bars<br />
Machinery<br />
carbon, carbon-manganese, alloy 90<br />
Chain Cable Stock<br />
U1, U2 72<br />
Prumyslova 1000<br />
CZ-739 70 Trinec - Stare Mesto<br />
Tel: +420 558 533 010 Fax: +420 558 533 306 Email: mailto:marie.antochova@trz.cz Web hppt://www.trz.cz<br />
Approval for Slabs as semi finished products are for further processing for rolled products, nominal sizes are 240mm wide x 12000mm long to the above<br />
maximum thickness.<br />
Approval for Bars as semi finished products are for further processing for tube production, nominal length 1200mm to the above maximum diameter.<br />
Certificate #: MD00/1562/0006/1 Inspection Due: 13/07/2013<br />
Page<br />
22<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
TRINECKE ZELEZARNY, a.s. Prague Sections<br />
Normal Strength<br />
B, D 40<br />
A 50<br />
Higher Strength<br />
DH32, DH36 40<br />
Univerzalni trat<br />
Bezrucova 300<br />
735 93 Bohumín<br />
AH27S, AH32, AH36 50<br />
Tel: +42 (0) 596 082 097 or 558 533 897 Fax: +420 558 533 896 Email mailto:jan.rusz@trz.cz Web http://www.trz.cz<br />
The approved sections are in the form <strong>of</strong> universal flats nominal widths 150 to 550mm to the maximum thicknesses shown above.<br />
Mechanical testing is carried out by approved works TRINECKE ZELEZARNY A.S. Certificate ID No: MD00/1562.<br />
Approval covers for heat treatment is carried out by approved works VITKOVICE HEAVY MACHINERY a.s.<br />
Parent Company: TRINECKE ZELEZARNY a.s., Prumyslova 1000, CZ-739 70 Trinec-Stare Metso.<br />
Certificate ID No : MD00/2020.<br />
Certificate No. MD00/3056/0004/1 Expiry date: 14/02/2013<br />
VITKOVICE HEAVY MACHINERY a.s. Prague<br />
Ruska 2887/101<br />
70602 Ostrava-Vitkovice<br />
Tel: +420 595 95 6878 Fax: +420 595 95 6035<br />
Email:jiri.bros@vitkovice.cz<br />
Web: http://www.vitkovice.cz<br />
Certificate #: MD00/2020/0005/1 Expiry date: 01/04/2014<br />
ZDAS, a.s. Prague<br />
Metallurgical Plant<br />
59171 Zdár nad Sázavou<br />
Tel: +420 566 643 998 Fax: +420 566 642 803<br />
Email: mailto:antonin.tlusty@zdas.cz<br />
Web:http://www.zdas.cz<br />
Certificate #: MD00/1697/0004/1 Expiry date: 26/08/2014<br />
ŽELEZÁRNY VESELÍ A.S. Prague<br />
Division Železárny Hrádek,<br />
Rokycanská 204,<br />
338 42 Hrádek u Rokycan,<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
E.A.F. / Ingot<br />
Ingots<br />
E.A.F. / Ingot<br />
Ingots<br />
E.A.F. / Ingot<br />
Tel: +420 474 644096 Fax: +420 474 642 288 Email mailto:stehlik.libor@steel-holding.cz Web: www.steel-holding.cz<br />
Certificate #: MD00/4063/0001/1 Expiry date: 05/08/2015<br />
Denmark<br />
NLMK DANSTEEL A/S Copenhagen<br />
Havnevej 33<br />
DK-3300 Frederiksværk<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Tel: +45 477 82647 Fax: +45 477 70322 Email: mailto:zib@dansteel.dk Web:http://www.dansteel.dk<br />
All grades <strong>and</strong> thicknesses accepted with specified through thickness properties, Z25 <strong>and</strong> Z35 designations.<br />
Certificate Number: MD00/0403/0007/1 Expiry: 09/01/2015<br />
Egypt, Arab Republic <strong>of</strong><br />
ABU ZAABAL ENGINEERING INDUSTRIES Cairo<br />
Hot <strong>and</strong> Cold Rolling mill (AZE)<br />
Abu Zaabal<br />
Inchas<br />
Tel: +20 224883220 Fax: +20 4883164 Email: aze_lab@yahoo.com<br />
Certificate # MD00/3421/0002/1 Expiry date: 27/01/2014<br />
EGYPTIAN IRON & STEEL CO. Port Said<br />
El Tebbin<br />
Helwan<br />
Cairo<br />
Tel: +202 5940593 Fax +202 5011608<br />
Email: mailto:eisc@idsc.net.eg<br />
Web www.iron.steel.com.eg<br />
Telex 20176 Tebbin<br />
Certificate #: MD00/0438/0007/1 Expiry date: 23/02/2013<br />
Plates<br />
Steelmaking<br />
Plates<br />
Hot Rolled Coil<br />
Sections<br />
Page<br />
Normal Strength<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
23<br />
As below<br />
carbon, carbon-manganese, alloy 80<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 12<br />
carbon, carbon-manganese 4<br />
E 60<br />
A, B, D 100<br />
EH32, EH36, EH36S 80<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 100<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 100<br />
A, B, D 100<br />
As below<br />
A 50<br />
A 50<br />
360FG, 410FG 25<br />
A 50<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Finl<strong>and</strong><br />
OUTOKUMPU STAINLESS OY Helsinki/Helsin Steelmaking<br />
gfors<br />
Terastie 1,<br />
95490<br />
Tornio<br />
Tel No: +358 40 7675371 Fax no:+358 16 452 350<br />
Email:susanna.siukonen@outokumpu.com<br />
Web: http://www.outokumpu.com<br />
Certificate #: MD00/1165/0006/1 Expiry date: 03/03/2014<br />
Semi-Finished<br />
Plates<br />
Hot Rolled Coil<br />
Coil<br />
E.A.F. / Con Cast<br />
Slabs<br />
Austenitic Stainless<br />
Austenitic Stainless<br />
Austenitic Stainless<br />
As below<br />
austenitic stainless 187<br />
304L, 316L, 321 12<br />
304L, 316L, 321 12<br />
304L, 316L, 321 6<br />
OVAKO IMATRA OY AB Turku/Åbo Steelmaking<br />
E.A.F. / Con Cast<br />
As below<br />
Semi-Finished Blooms<br />
carbon, carbon-manganese, alloy 370<br />
Bars<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
180<br />
Structural<br />
carbon, carbon-manganese, alloy 180<br />
Machinery<br />
alloy 180<br />
carbon, carbon-manganese 200<br />
Terästehtaantie 1<br />
FI-55100 IMATRA<br />
Tel: +358 5 680 21 Fax: +358 5 680 2211 Email: mailto:heikki.hurmola@ovako.com Web:http://www.ovako.com<br />
Semi-finished products in carbon, carbon-manganese <strong>and</strong> alloy steel with fine grain (element combinations as stated), blooms to 370 mm section, to 6000mm long<br />
for further processing to rolled products<br />
MQS <strong>Approved</strong> - Approval No. MQS 020<br />
Certificate #: MD00/0751/0009/1 Expiry date: 06/01/2015<br />
RUUKKI METALS OY Turku/Åbo<br />
Raahe Steel Works<br />
Rautaruukintie 155, PO Box 93<br />
92101 Raahe<br />
Steelmaking<br />
Plates<br />
Hot Rolled Coil<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Normal Strength<br />
Higher Strength<br />
Tel +358 20 5911 Mob +358 40 54 90257 Fax +358 20 5923527 Email:mailto:lassi.myllykoski@ruukki.com Web: http://www.ruukki.com<br />
Specified through thickness properties for up to 100 mm thickness.<br />
MQS <strong>Approved</strong> - Approval No. MQS 007<br />
Certificate #: MD00/1233/0008/1 Expiry date: 11/12/2013<br />
Page<br />
24<br />
As below<br />
A, B, D, E 150<br />
FH27S, FH32, FH36 40<br />
AH40, DH40, DH42, EH40, EH42 80<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 150<br />
EH27S, EH32, EH36<br />
360AR, 410AR 40<br />
360, 410, 460, 490, 360FG, 410FG, 460FG, 490FG, 100<br />
510FG<br />
LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
40<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,<br />
LTFH27S, LTFH32, LTFH36<br />
A, B, D, E 15<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
15<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
France<br />
AKERS FRANCE Lyon<br />
USINE DE THIONVILLE<br />
Chemin du Leidt<br />
Steelmaking<br />
Semi-Finished<br />
EAF/LRF/VD/Ingot<br />
Ingots<br />
B.P. 10200<br />
57104 Thionville Cedex<br />
Tel: +33 6 79 27 94 41 e mail: mailto:christophe.evrard@akersrolls.com web: http://www.akersrolls.com<br />
Certificate #: MD00/3386/0002/1 Expiry date: 27/05/2014<br />
APERAM Lyon<br />
Gueugnon Plant BP 1<br />
4 place des Forges<br />
71130 Gueugnon<br />
Plates<br />
Austenitic Stainless<br />
Tel: +33 3 85 85 78 56 Fax: +33 3 85 85 14 12 Email: mailto:gerard.ramoissenet@aperam.com Web: http://www.aperam.com<br />
Certificate #: MD00/1582/0005/1 Expiry Date: 11/03/2014<br />
Carbon, Carbon-manganese, Alloy<br />
carbon, carbon-manganese, alloy 70<br />
304L, 316L, 321, 304* 6<br />
APERAM ALLOYS IMPHY Lyon<br />
Steelmaking<br />
E.A.F. / Ingot<br />
austenitic stainless<br />
Plates<br />
Fe-Ni alloys<br />
Fe-36Ni* 8<br />
Hot Rolled Coil Fe-Ni alloys<br />
Fe-36Ni* 8<br />
Avenue Jean Jaurès<br />
58160 IMPHY<br />
*Cold <strong>and</strong> hot rolled strip up to 8mm in INVAR/M93 grade (Fe-Ni36) for approved applications.<br />
Tel: +33 3 86 21 31 23 Fax: +33 3 86 21 31 07 Email:mailto:pascal.france@arcelormittal.com Web:http://www.imphyalloys.com<br />
Certificate #: MD00/1870/0005/1 Expiry date: 14/06/2012<br />
ARCELORMITTAL Marseille<br />
Méditerranée Fos-sur-Mer<br />
13776 Fos-Sur-Mer<br />
CEDEX<br />
Tel: +33 (0) 4 4247 3314 FAx +33 (0) 4 4247 1720 Email<br />
mailto: florence.sixdeniers@arcelormittal.com<br />
Certificate #: MD00/3803/00014/1 Expiry date: 25/11/2012<br />
ARCELORMITTAL ATLANTIQUE LORRAINE Dunkerque<br />
ARCELOR MITTAL<br />
Site de Dunkerque<br />
Steelmaking<br />
Hot Rolled Coil<br />
Steelmaking<br />
Semi-Finished<br />
BP 2508<br />
59381 Dunkerque Cedex 1<br />
Tel: +33 328 293220 Fax: +33 328 296974 Email mailto:bernard.debiesme@arcelormittal.com<br />
Certificate #: MD00/2232/0005/1 Expiry date: 09/06/2013<br />
ASCOMETAL Dunkerque<br />
Usine de Dunes<br />
BP 41<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
59941 Dunkerque<br />
Cedex 2<br />
Machinery grades up to 180 mm by continuous casting, 310 mm by ingot<br />
Tel +33 32829 6203 Fax +33 32829 6003<br />
Certificate #: MD00/0117/0006/1 Expiry date: 13/09/2012<br />
ASCOMETAL Marseille<br />
Usine de Fos-sur-Mer<br />
BP 30<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
B.O.S. / Con Cast<br />
Slabs<br />
E.A.F./Ingot/Con Cast<br />
Blooms/Billets<br />
Structural<br />
Machinery<br />
Chain Cable Stock<br />
E.A.F. / Ingot<br />
Blooms<br />
Billets<br />
Structural<br />
13771 Fos-sur-Mer<br />
Tel: +33 (0) 442 479 216 Fax: +33 (0) 442 051 511 Email : mailto:bruno.dadolle@ascometal.com<br />
Certificate Number: MD00/0118/0006/1 Expiry: 03/09/2015<br />
AUBERT & DUVAL Lyon<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Page<br />
E.A.F. / Ingot<br />
Blooms/Billets<br />
Structural<br />
Machinery<br />
25<br />
As below<br />
A, B, D 16<br />
AH32, AH36, DH32, DH36, EH36 13<br />
460FG, 490FG, 510FG 13<br />
360AR, 410AR 16<br />
carbon, carbon-manganese<br />
carbon, carbon-manganese 247<br />
As below<br />
carbon, carbon-manganese, alloy 400<br />
carbon, carbon-manganese, alloy 310<br />
carbon, carbon-manganese, alloy 310<br />
U3 105<br />
U1, U2 130<br />
As below<br />
carbon, carbon-manganese, alloy 400<br />
carbon, carbon-manganese, alloy 205<br />
carbon, carbon-manganese, alloy 325<br />
As below<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless steel<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless<br />
450<br />
50<br />
200<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
Aciéries des Ancizes<br />
BP 1<br />
63770 Les Ancizes<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Tel: +33 4 7367 3128 Fax: +33 4 7367 3174 Email: mailto:frederic.folio@eramet-aubertduval.com<br />
web: http://www.aubertduval.com<br />
Certificate #: MD00/0127/0005/1 Expiry date: 05/03/2013<br />
CELSA FRANCE Bilbao Steelmaking<br />
B.O.S. / Con Cast<br />
As below<br />
Semi-Finished Billets<br />
Normal Strength, Higher Strength 160<br />
Rond-Point Claudius Magnin<br />
64340 Boucau<br />
Tel: +33 05 59 64 41 00 Fax: +33 05 59 64 41 21 email: nmelquiot@celsafrance.com Web: http://www.celsafrance.com<br />
Billets as semi-finished products, nominal 160mm width <strong>and</strong> nominal 13300mm length to the above maximum thickness are approved for further processing for<br />
rolled products.<br />
Certificate Number: MD00/3539/0002/1 Expiry date: 12/11/2014<br />
GTS Industries Dunkerque<br />
Dunkerque Mill<br />
BP 6317<br />
59379 Dunkerque Cedex 1<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Tel: +33 (0)3 28 29 39 64 Fax: +33 (0)3 28 29 69 12 Email:mailto:philippe.nawracala@gts.dillinger.biz<br />
Web: http://www.gts-dillinger.fr<br />
Specified through thickness properties for all nornal <strong>and</strong> higher strength grade plates notation Z35 may be added.<br />
Certificate #: MD00/1818/0007/1 Expiry date: 09/06/2013<br />
INDUSTEEL FRANCE Lyon<br />
ARCELOR MITTAL<br />
Site de Chateauneuf<br />
BP 368 - Chateauneuf<br />
42803 RIVE DE GIER<br />
Tel: +33 4 77 75 21 12 Fax: +33 4 77 75 20 03<br />
Email: mailto:jean-philippe.baron@arcelormittal.com<br />
Including plates with specified through thickness properties.<br />
Certificate #: MD00/0351/0006/1 Expiry date: 20/04/2014<br />
INDUSTEEL FRANCE, site du Creusot Lyon<br />
Porte du Breuil - BP 34<br />
71201<br />
71201 LE CRUUSOT CEDEX<br />
Le Creusot Cedex<br />
Steelmaking<br />
Plates<br />
Steelmaking<br />
Semi-Finished<br />
Tel No 33 3 8580 5575 Fax No. 33 3 8580 5211<br />
Email: laetitia.billard@arcelormittal.com<br />
Web: www.industeel.info<br />
Certificate number MD00/3227/0001/1<br />
Ingots also in martensitic stainless steel up to 40 T for approved applications<br />
INDUSTEEL FRANCE, site du Creusot Lyon<br />
56 rue Clemenceau - BP19<br />
71201<br />
Tel: +33 3 8580 5575 Fax: +33 3 8580 5211<br />
Email: mailto:laetitia.billard@arcelormittal.com<br />
Web: http://www.industeel.info<br />
Plates with specified through thickness properties.<br />
Certificate #: MD00/1822/0007/1 Expiry date: 27/02/2015<br />
Plates<br />
Page<br />
E.A.F. / Ingot<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
E.A.F. / Ingot<br />
Ingots<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Austenitic Stainless<br />
26<br />
E 80<br />
A, B, D 100<br />
AH40, DH40, EH40, FH40 42<br />
FH27S, FH32, FH36 50<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
75<br />
460FG, 490FG, 510FG 50<br />
360FG, 410FG 100<br />
LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,<br />
LTFH27S, LTFH32, LTFH36<br />
50<br />
carbon, carbon-manganese<br />
A 400<br />
FH32, FH36 50<br />
AH32, AH36, DH32, DH36, EH32, EH36 400<br />
360AR, 410AR 40<br />
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 100<br />
LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,<br />
LTEH36, LTFH32, LTFH36, 1.5Ni, 3.5Ni, 5Ni,<br />
9Ni<br />
50<br />
As below<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless<br />
A, B, D, E 150<br />
FH32, FH36 50<br />
AH32, AH36, DH32, DH36, EH32, EH36 150<br />
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 100<br />
LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,<br />
LTEH36, LTFH32, LTFH36, 1.5Ni, 3.5Ni, 5Ni,<br />
9Ni<br />
50<br />
304L, 316L 50<br />
40<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
LAMINES MARCHANDS EUROPEENS Lyon<br />
Steelmaking<br />
B.O.S. / Con Cast<br />
As below<br />
Semi-Finished Billets<br />
carbon, carbon-manganese 200<br />
Sections<br />
Normal Strength<br />
A 13<br />
Bars<br />
Normal Strength<br />
A 30<br />
2, Rue Emile Zola<br />
59125 Trith St Léger<br />
Tel +33 (0)3 2714 2270 Fax +33 (0)3 2714 2010 Email: mailto:e.cotton@lme.fr<br />
Certificate #: MD00/1395/0007/1 Expiry date: 20/10/2013<br />
UGITECH S.A. Lyon<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
Bars<br />
E.A.F./A.O.D./Con Cast<br />
Billets<br />
Austenitic Stainless<br />
Duplex Stainless<br />
Austenitic Stainless<br />
Duplex Stainless<br />
Machinery<br />
Avenue Paul Girod,<br />
73403 UGINE Cedex<br />
Tel: +33 4 79 89 32 92 Fax: +33 4 79 89 34 74 Email: mailto:laurent.prost@ugitech.com Web: http://www.ugitech.com<br />
Certificate #: MD00/1583/0006/1 Expiry Date: 24/08/2014<br />
Germany<br />
ARCELORMITTAL BREMEN GmbH Bremen<br />
Carl-Benz- Straße 30<br />
D-28237 Bremen<br />
Tel +49 421 648 2306 Fax +49 412 648 3150<br />
Email: mailto:ralf.bruns@arcelormittal.com<br />
Web: http://www.arcelormittal.com/bremen<br />
Certificate No. MD00/0857/0005/1 Expiry date: 19/10/2013<br />
ARCELORMITTAL EISENHÜTTENSTADT GMBH Dortmund<br />
Werkstraße 1<br />
D-15872 Eisenhüttenstadt<br />
Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
Steelmaking<br />
Semi-Finished<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
B.O.S. / Con Cast<br />
Slabs<br />
Blooms<br />
Tel +49 3364 3782 05 Fax +49 3364 3781 97 Email: mailto:frank.schadow@arcelormittal.com Web http://www.arcelormittal-ehst.com<br />
Continuously cast slab up to 250 mm thickness <strong>and</strong> cast bloom up to 300 mm thickness.<br />
Certificate No. MD00/0450/0005/1 Expiry date: 22/01/2013<br />
ARCELORMITTALAL RUHRORT GmbH Dortmund<br />
Vohwinkelstraße 107<br />
D-47137 Duisburg<br />
Tel 0049 (0) 203 / 52 66 180 Fax 0049 (0) 203 / 606 66 332<br />
email: hans-dieter.drippe@arcelormittal.com<br />
Web http://www.arcelormittal.com<br />
Certificate Number: MD00/3631/0002/1 Expiry date: 25/07/2014<br />
Aktiengesellschaft der Dillinger Hüttenwerke Hamburg<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Plates<br />
B.O.S. / Con Cast<br />
Blooms<br />
Billets<br />
B.O.S./Ingot/Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Hüttenwerkstrasse<br />
Postfach 1580<br />
D-66748 Dillingen / Saar<br />
Tel: +49 6381 474735 Fax: +49 6831 473689 Email: mailto:frank.schik<strong>of</strong>ski@dillinger.biz Web:http://www.dillinger.de<br />
All plates with specified through thickness properties.<br />
Certificate No. MD00/0361/00012/1 Expiry date: 20/09/2014<br />
BENTELER STEEL/TUBE GmbH Dortmund<br />
Steelmaking<br />
Semi-Finished<br />
Page<br />
E.A.F. / Con Cast<br />
Slabs<br />
Blooms/Billets<br />
27<br />
As below<br />
As below 205<br />
304L, 316L, 321 32<br />
UNS S31803 32<br />
304L, 316L, 321 130<br />
UNS S31803 130<br />
austenitic stainless, duplex stainless, martensitic<br />
stainless*<br />
95<br />
As below<br />
As below 220<br />
A, B, D 20<br />
360, 410, 360FG, 410FG 20<br />
carbon, carbon-manganese<br />
carbon, carbon-manganese 225<br />
carbon, carbon-manganese 300<br />
As below<br />
carbon, carbon-manganese, alloy 385<br />
carbon, carbon-manganese, alloy 130<br />
As below<br />
A, B, D, E 170<br />
FH32, FH36 50<br />
AH40, DH40, EH40 100<br />
AH32, AH36, DH32, EH32 170<br />
DH36, EH36 220<br />
360FG, 410FG, 460FG, 490FG, 510FG 100<br />
LTAH32, LTAH36, LTDH32, LTDH36, LTEH32,<br />
LTEH36, LTFH32, LTFH36, 5Ni<br />
50<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 215<br />
carbon, carbon-manganese, alloy 310<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
Niederdarmer Straße 5<br />
D-49811 Lingen<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Tel: +49 591 80004 800 Fax: +49 591 80004 460 Email to: gerd.lindenschmidt@benteler.de<br />
Web: http://www.benteler.de<br />
Certificate No. MD00/1805/0006/1 Expiry date: 11/10/2014<br />
Steelmaking <strong>and</strong> semi-finished slabs, blooms <strong>and</strong> billets intended for plates, forgings <strong>and</strong> tubes.<br />
Semi-finished products in carbon, carbon-manganese <strong>and</strong> alloy steel: slabs to 670mm wide, to 11,500mm long to 12.8 tonnes <strong>and</strong> blooms/billets <strong>of</strong> dimensions<br />
300mm x 230mm or 310mm round <strong>of</strong> maximum length 12,800mm<br />
BGH EDELSTAHL FREITAL GmbH Dortmund<br />
Am Stahlwerk 1<br />
D-01705 Freital<br />
Tel: +49 (0)351 646 2232 Fax: +49 (0)351 646 2888<br />
Email: mailto:steffen.Rehberg@bgh.de<br />
Web: http://www.bgh.de<br />
Including forged bars<br />
Certificate No. MD00/1973/0006/1 Expiry date: 06/08/2014<br />
BGH EDELSTAHL SIEGEN GmbH Dortmund<br />
Industriestraße 9,<br />
D-57076<br />
Siegen<br />
Tel No. +49 (0)271 701- 341 Fax No. +49 (0) 271 701- 300<br />
Email peter.h<strong>of</strong>fmann@bgh.de<br />
Web www.bgh.de<br />
Certificate No MD00/3767/0001/1 Expiry date: 01/04/2013<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Semi-Finished<br />
E.A.F./Ingot/Con Cast<br />
Ingots<br />
Slabs<br />
Billets<br />
Machinery<br />
Ingots<br />
As below<br />
alloy, austenitic stainless, duplex stainless,<br />
12<br />
stainless steels<br />
stainless steel 230<br />
As below 120<br />
alloy, austenitic stainless, duplex stainless, 165<br />
martensitic stainless*<br />
alloy, austenitic stainless 32<br />
BUDERUS EDELSTAHL GmbH Dortmund Steelmaking<br />
E.A.F. / Ingot<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless<br />
Bars<br />
Semi-finished Products carbon, carbon-manganese, alloy 200<br />
Machinery<br />
carbon, carbon-manganese, alloy 190<br />
Buderusstraße 25<br />
D-35573 Wetzlar<br />
Tel: +49 (0)6441 374 2505 Fax: +49 (0)6441 374 2681 Email: mailto:lothar.schaefer@buderus-steel.com Web: http://www.buderus-steel.com<br />
Certificate No. MD00/0257/0008/1 Expiry date: 08/07/2014<br />
DEUTSCHE EDELSTAHLWERKE GMBH Dortmund<br />
Works Siegen<br />
Obere Kaiserstraße<br />
D-57078 Siegen<br />
Steelmaking<br />
Bars<br />
E.A.F. / Con Cast<br />
E.A.F. / Ingot<br />
Structural<br />
Machinery<br />
Tel: +49 (0)271 808 26 94 Fax: +49 (0)271 808 25 01 Email: mailto:<strong>and</strong>reas.prause@dew-stahl.com Web: http://www.dew-stahl.com<br />
Certificate No. MD00/0901/0008/1 Expiry date: 12/07/2014<br />
DEUTSCHE EDELSTAHLWERKE GMBH Dortmund<br />
Works Witten<br />
Auestraße 4<br />
D-58452 Witten<br />
Steelmaking<br />
Bars<br />
E.A.F. / Con Cast<br />
E.A.F. / Ingot<br />
Semi-finished Products<br />
Structural<br />
Machinery<br />
Tel: +49 (0) 2302 294 131 Fax: +49 (0) 2302 294 662 Email:mailto:heinz.hirsch@dew-stahl.com Web:http://www.dew-stahl.com<br />
Certificate No. MD00/2075/0010/1 Expiry date: 21/01/2013<br />
ELEKTROSTAHLWERKE GRÖDITZ GmbH Dortmund<br />
Riesaer Straße 1<br />
D-01609 Gröditz<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Ingot<br />
Tel: +49 35263 62-611 Fax: +49 35263 62-622 Email: mailto:Ilvia.Polchow@stahl-groeditz.de Web:http://www.stahl-groeditz.de<br />
Certificate No. MD00/2880/0005/1 Expiry date: 12/04/2014<br />
GEORGSMARIENHÜTTE GmbH Dortmund<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Page<br />
Ingots<br />
E.A.F./Ingot/Con Cast<br />
Ingots<br />
Blooms<br />
Normal Strength<br />
Higher Strength<br />
Structural<br />
28<br />
As below<br />
As below<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless, duplex stainless, martensitic stainless*<br />
As below<br />
As below<br />
carbon, carbon-manganese, alloy, austenitic 250<br />
stainless<br />
alloy, austenitic stainless 250<br />
alloy, austenitic stainless, duplex stainless, 250<br />
martensitic stainless*<br />
As below<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless<br />
As below<br />
carbon, carbon-manganese, alloy 44<br />
carbon, carbon-manganese, alloy 240<br />
A, B, D, E 180<br />
AH32, AH36, DH32, DH36, EH32 180<br />
alloy 270<br />
carbon, carbon-manganese 280<br />
80<br />
80<br />
84<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Germany<br />
GEORGSMARIENHÜTTE GmbH Dortmund<br />
Neue Hüttenstraße 1<br />
D-49124 Georgsmarienhütte<br />
Tel: +49 (0)5401 39-0 Fax: +49 (0)5401 394598<br />
Email: <strong>and</strong>re.rademacher@gmh.de<br />
Web: http://www.gmh.de<br />
Certificate No. MD00/0596/0006/1 Expiry date: 04/10/2013<br />
H.E.S. HENNIGSDORFER ELEKTROSTAHLWERKE<br />
GmbH<br />
Dortmund<br />
Bars<br />
Steelmaking<br />
Bars<br />
Chain Cable Stock<br />
E.A.F. / Con Cast<br />
Structural<br />
Machinery<br />
Chain Cable Stock<br />
Wolfgang-Küntscher-Straße 18<br />
D-16761 Hennigsdorf<br />
Tel: +49 (0)3302 806-0 Fax: +49 (0)3302 806-211 Email: mailto:labor.hes@rivagroup.com Web: http://www.rivagroup.com<br />
Certificate No. MD00/0665/0007/1 Expiry date: 01/07/2014<br />
HOESCH SCHWERTER PROFILE GmbH Dortmund<br />
Eisenindustriestraße 1<br />
D-58239 Schwerte<br />
Tel: +49 (0)2304 106-340 Fax: +49 (0)2304 106-590<br />
Email: mailto:info@tks-hho.thyssenkrupp.com<br />
Web: http://www.hoesch-pr<strong>of</strong>ile.de<br />
Certificate No. MD00/0682/0006/1 Expiry date: 08/01/2015<br />
Hüttenwerke Krupp Mannesmann GmbH Dortmund<br />
Huckingen Works<br />
Ehinger Strasse 200<br />
D-47259 Duisburg-Huckingen<br />
Sections<br />
Steelmaking<br />
Semi-Finished<br />
Normal Strength<br />
B.O.S. / Con Cast<br />
Slabs<br />
Blooms/Billets<br />
Tel: +49 (0)203 999-01 Fax: +49 (0)203 999-4411 Email: mailto:michael.ninnemann@hkm.de Web: http://www.hkm.de<br />
Certificate No. MD00/0730/0006/1 Expiry date: 07/02/2015<br />
ILSENBURGER GROBBLECH GmbH Dortmund<br />
Veckenstedter Weg<br />
D-38871 Ilsenburg<br />
All plates with specified through thickness properties.<br />
Tel: +49 39452/85 5530 Fax: +49 39452/85 5733<br />
EMail mailto:Manegold@ilsenburger-Grobblech.de<br />
Web: http://www.ilsenburger-Grobblech.de<br />
Certificate No. MD00/1654/0012/1 Expiry date: 24/02/2014<br />
Lech-Stahlwerke GmbH Hamburg<br />
Meitingen-Herbertsh<strong>of</strong>en<br />
Industriestrasse 1<br />
D-86405 Meitingen<br />
Plates<br />
Steelmaking<br />
Bars<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Austenitic Stainless<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Machinery<br />
U1, U2, U3, R3 155<br />
As below<br />
Tel: +49 (0) 8271/82-325 Fax: +49 (0) 8271/82-405 Email:mailto:christian.herrmann@lech-stahlwerke.de Web: http://www.lech-stahlwerke.de<br />
Certificate No. MD00/0921/0005/1 Expiry date: 03/11/2012<br />
PEINER TRÄGER GMBH Dortmund<br />
Gerhard-Lucas-Meyer Str. 10<br />
D-31226 Peine<br />
Steelmaking<br />
Sections<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Tel: +49 5171 91 9321 Fax: +49 5171 91 9373 Email: Schernich.O@salzgitter-ag.de Website: www.peinertraeger.de<br />
Certificate No. MD00/3075/0003/1 Expiry date: 14/05/2013<br />
Page<br />
29<br />
carbon, carbon-manganese, alloy 100<br />
carbon, carbon-manganese, alloy 50<br />
U1, U2 73<br />
A 50<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 260<br />
carbon, carbon-manganese, alloy 406<br />
B, D, E 85<br />
A 150<br />
AH40, DH40, EH40, FH40 100<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 120<br />
EH27S, EH32, EH36, FH27S, FH32, FH36<br />
360AR, 410AR, 460AR 40<br />
360, 410, 460, 490, 360FG, 410FG, 460FG, 490FG, 100<br />
510FG<br />
LTAH40, LTDH40, LTEH40, 1.5Ni, 3.5Ni, 5Ni, 50<br />
9Ni<br />
LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
120<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,<br />
LTFH27S, LTFH32, LTFH36<br />
316L 80<br />
As below<br />
A, B 100<br />
carbon, carbon-manganese, alloy 90<br />
As below<br />
A, B, D, E 40<br />
AH32, AH36, DH32, DH36, EH32, EH36 40<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
REINER BRACH GmbH & Co. KG Bremen Plates<br />
Normal Strength<br />
A, B, D, E 250<br />
Higher Strength<br />
AH32, AH36, DH32, DH36, EH32, EH36 120<br />
AH27S, DH27S, EH27S 250<br />
Boiler & Pressure Vessel 460FG, 490FG, 510FG 120<br />
360FG, 410FG 150<br />
Wilhelm-Karmann-Straße 5<br />
D-28237 Bremen<br />
Tel: +49 421 985 08-140 Fax: +49 421 985 08-149<br />
Email mailto:frank-santuari@brach.de<br />
Web:http://www.brach.de<br />
Certificate No. MD00/2631/0006/1 Expiry date: 01/01/2015<br />
REINER BRACH GmbH & Co. KG Bremen<br />
Betriebsstätte Eisenhüttenstadt<br />
Werkstraße,16<br />
D-15890 Eisenhüttenstadt<br />
Tel No +49 3364 37 81 54 Fax No +49 3364 37 81 55<br />
Email: info@brach.de<br />
Web: www.brach.de<br />
Certificate No. MD00/4032/0001/1 Expiry Date 08/06/2015<br />
SAARSCHMIEDE GmbH FREIFORMSCHMIEDE Hamburg<br />
Bismarckstraße 57-59<br />
D-66330 Völklingen<br />
Tel:+49 (0)6898 102650 Fax:+49(0)6898 104560<br />
Email:mailto: m.lorinser@saarschmiede.com<br />
Web:http://www.saarschmiede.com<br />
Certificate No. MD00/2017/0001/1 Expiry date: 25/06/2014<br />
SAARSTAHL AG Hamburg<br />
Works Neunkirchen<br />
D-66511 Neunkirchen<br />
Semi-Finished<br />
Steelmaking<br />
Bars<br />
Ingots<br />
EAF/LRF/VD/Ingot<br />
Normal Strength<br />
Chain Cable Stock<br />
Tel: +49 6821 168644 Fax: +49 6898 1054293 Email: mailto:hanswerner.muller@saarstahl.com Web:http://www.saarstahl.com<br />
Certificate No. MD00/1286/0006/1 Expiry date: 10/08/2014<br />
SAARSTAHL AG Hamburg<br />
Works Völklingen<br />
Bismarckstrasse 57 - 59<br />
D-66330 Völklingen<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
B.O.S. / Con Cast<br />
Blooms/Billets<br />
Normal Strength<br />
Chain Cable Stock<br />
Tel: +49 (0) 6898 104 293 Fax: +49 (0) 6898 105 4293 Email: mailto:mark.bleymehl@saarstahl.com Web:http://www.saarstahl.com<br />
Certificate Number: MD00/1931/0006/1 Expiry: 10/08/2014<br />
SALZGITTER FLACHSTAHL GmbH Dortmund<br />
D-38239 Salzgitter,<br />
Eisenhüttenstrasse 99,<br />
Tel: +49 5341 21-3196 Fax: +49 5341 21-2008<br />
Email: KoerferG@salzgitter-ag.com<br />
Web: www.salzgitter-flachstahl.de<br />
<strong>Approved</strong> slab section sizes up to 350 x 2600mm.<br />
Steelmaking<br />
Semi-Finished<br />
B.O.S. / Con Cast<br />
Slabs<br />
carbon, carbon-manganese 43<br />
Carbon, Carbon-manganese 56<br />
A 40<br />
U1, U2, U3 40<br />
As below<br />
Normal Strength 265<br />
A 160<br />
U1, U2, U3 100<br />
As below<br />
carbon, carbon-manganese 350<br />
Steel types carbon <strong>and</strong> carbon-manganese cover the supply <strong>of</strong> slabs for processing into normal strength, high strength, boiler <strong>and</strong> pressure vessel grades <strong>and</strong><br />
ferritic steels for low temperature service according to the Society's Rules for the Manufacture, Testing <strong>and</strong> Certification <strong>of</strong> Materials, Chapter 3. The final<br />
processing mill is responsible for ordering steel which complies with their approved chemical composition <strong>and</strong> enables them to achieve the required mechanical<br />
properties.<br />
SALZGITTER MANNESMANN GROBBLECH GmbH Dortmund Plates<br />
Normal Strength<br />
A, B, D, E 50<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
50<br />
Boiler & Pressure Vessel 360AR, 410AR 40<br />
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 50<br />
Wiesenstraße 36<br />
D-45473 Mülheim an der Ruhr<br />
Austenitic Stainless<br />
304L, 316L 50<br />
Tel: +49 (0)208 458 458 4510 Fax: +49 (0)208 458 1872 Email: mailto:info.service@smgb.de Web: http://www.smgb.de<br />
Certificate No. MD00/1806/0006/1 Expiry date: 28/04/2014<br />
STAHLWERK BOUS GMBH Hamburg<br />
P/O Box 1243<br />
D-66359 Bous/Saar<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Ingot<br />
Tel: +49 6834 81286 Fax: +49 6834 81586 Email: mailto:mmuth@stahlwerk-bous.de Web http://www.stahlwerk-bous.de<br />
Ingots up to 60 tonne <strong>and</strong> 2300 mm dia.<br />
Certificate #: MD00/1249/0005/1 Expiry date: 21/08/2013<br />
Page<br />
Ingots<br />
30<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese 60<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
STAHLWERK THÜRINGEN GMBH Dortmund Steelmaking<br />
E.A.F. / Con Cast<br />
As below<br />
Sections<br />
Normal Strength<br />
A, B 25<br />
Higher Strength<br />
AH32, AH36, DH32, DH36 25<br />
Kronacher Straße 6<br />
D-07333 Unterwellenborn<br />
Tel +49 3671 455006010 Fax +49 3671 45507710<br />
Email: mailto:gerd.h<strong>of</strong>fmann@stahlwerk-thuringen.de<br />
Web http://www.stahlwerk-thueringen.de<br />
Certificate #: MD00/1424/0006/1 Expiry date: 22/11/2012<br />
Schmidt + Clemens GmbH + Co. KG Dortmund<br />
Kaiserau 2<br />
D-51789 Lindlar<br />
Steelmaking<br />
Bars<br />
E.A.F. / Ingot<br />
Structural<br />
Tel: +49 (0)22 62232 Fax: +49 (0)22 668232 Email: mailto:a.hagen@schmidt-clemens.de Web http://www.schmidt-clemens.de<br />
Certificate #: MD00/1319/0006/1 Expiry date: 12/10/2010<br />
THYSSENKRUPP STEEL EUROPE AG Dortmund<br />
Works Bochum<br />
Kaiser-Wilhelm-Straße 100<br />
D-47166 Duisburg<br />
Hot Rolled Coil<br />
Plates from coils<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
Boiler <strong>and</strong> Pressure Vessel<br />
Tel: +49 (0)203 52-1 Fax: +49 (0)203 52-43587 Email: mailto:rol<strong>and</strong>.riesbeck@thyssenkrupp.com Web: http://www.thyssenkrupp-stahl.com<br />
Certificate No. MD00/0899/0007/1 Expiry date: 24/08/2014<br />
As below<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless<br />
A, B, D, E 20<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 20<br />
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 20<br />
A, B, D, E 20<br />
AH27S, DH27S, AH32, DH32, AH36, DH36 20<br />
410 FG, 460 FG, 360 FG, 360, 410, 490FG, 510FG 20<br />
THYSSENKRUPP STEEL EUROPE AG Dortmund Steelmaking<br />
B.O.S. / Con Cast<br />
As below<br />
Semi-Finished Slabs<br />
As below 255<br />
Hot Rolled Coil Normal Strength<br />
A, B, D, E 20<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 20<br />
Boiler & Pressure Vessel 360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 20<br />
Works Beeckerwerth<br />
Tel: +49 (0)203 52-1 Fax: +49 (0)203 52-43587 Email: mailto:joachim.gottlieb@thyssenkrupp.com Web: http://www.thyssenkrupp-stahl.com<br />
Certificate # MD00/1823/0007/1 Expiry date: 19/08/2014<br />
THYSSENKRUPP STEEL EUROPE AG Dortmund<br />
Works Bruckhausen<br />
Tel: +49 (0)203 52-1 Fax: +49 (0)203 52-43587<br />
Email: mailto:joachim.gottlieb@thyssenkrupp.com<br />
Web: http://www.thyssenkrupp-stahl.com<br />
Certificate No. MD00/1824/0007/1 Expiry date: 25/08/2014<br />
Steelmaking<br />
Hot Rolled Coil<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
As below<br />
A, B, D, E 20<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 20<br />
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 20<br />
THYSSENKRUPP STEEL EUROPE AG Dortmund Plates<br />
Normal Strength<br />
A, B, D, E 150<br />
Higher Strength<br />
FH27S, FH32, FH36 50<br />
AH40, DH40, EH40 60<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
100<br />
Boiler & Pressure Vessel 360AR, 410AR 40<br />
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 100<br />
Ferritic Low Temperature LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,<br />
LTFH27S, LTFH32, LTFH36<br />
50<br />
Duplex Stainless<br />
UNS S31803 35<br />
Plates from coils Normal Strength<br />
A, B, D, E 20<br />
Higher Strength<br />
AH27S, DH27S, AH32, DH32, AH36, DH36,<br />
EH27S, EH32, EH36<br />
20<br />
Works Duisburg-Süd<br />
Boiler <strong>and</strong> Pressure Vessel 360 FG, 460 FG, 410 FG, 360, 410, 490FG, 510FG 20<br />
Tel: +49 (0)203 52-1 Fax: +49 (0)203 52-43587 Email: mailto:joachim.gottlieb@thyssenkrupp.com Web: http://www.thyssenkrupp-stahl.com<br />
Specified through thickness properties on all normal <strong>and</strong> higher strength steel grade plates.<br />
Certificate No. MD00/1825/0008/1 Expiry date: 19/08/2014<br />
ThyssenKrupp Nirosta GmbH Dortmund<br />
Works Krefeld<br />
Oberschlesienstraße 16<br />
D-47807 Krefeld<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F./Ingot/Con Cast<br />
Ingots<br />
Slabs<br />
As below<br />
austenitic stainless 16<br />
austenitic stainless 240<br />
Tel: +49 (0) 211 7107 562 Fax: +49 (0) 211 7107 376 Email: mailto:thomas.seifert@thyssenkrupp.com Web: http://www.thyssenkrupp.com<br />
Ingots as semi finished products nominal dimensions 1700 x 690xmm & nominal height 2600mm to the above maximum weight <strong>and</strong> slabs as semi finished<br />
products nominal width 1500mm & nominal length 10000mm, are approved for further processing for rolled products.<br />
Certificate Number: MD00/1852/0006/1 Expiry date: 16/11/2014<br />
Page<br />
31<br />
50<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Hungary<br />
ISD DUNAFERR Zrt. Lörinci Meleghengermü Vienna<br />
Hengersor u. 38<br />
1184 Budapest<br />
Tel: +36 1 296 2200/6206 Fax: +36 1 296 2201<br />
Email: mailto:erika.horvath@isd.dunaferr.hu<br />
Web http:\\www.dunaferr.hu<br />
Certificate No. MD00/0425/0007/1 Expiry date: 05/03/2012<br />
India<br />
ARCVAC FORGECAST LTD Calcutta<br />
12C, Lord Sinha Road,<br />
Post Box: 9210<br />
Kolkata: 700071<br />
West Bengal<br />
Tel: + 91 33 2600 2176; Fax + 91 33 2659 8002<br />
Email: swapan@smithy.in<br />
Web: www. arcvacsteel.com<br />
Certificate No. MD00/3561/0003/1 Expiry date: 07/02/2015<br />
ESSAR STEEL INDIA LTD. Mumbai<br />
Hot Strip Mill<br />
Hazira - 394270<br />
District Surat<br />
Gujarat<br />
Plates<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
Plates from coils<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
EAF/LRF/VD/Ingot<br />
Ingots<br />
E.A.F. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
B, D, E 35<br />
A 100<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
60<br />
360, 410 35<br />
360FG, 410FG, 460FG, 490FG, 510FG 60<br />
Carbon, Carbon-manganese, Alloy<br />
carbon, carbon-manganese, alloy 10<br />
As below<br />
Normal strength, Higher Strength 260<br />
A, B 20<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 20<br />
360FG, 410FG 20<br />
A, B 20<br />
AH27S, DH27S, AH32, DH32, AH36, DH36 20<br />
Tel: +91 261 6683139 Fax: +91 261 6683747 Email mailto:sravinarayana.bhat@essar.com Web http://www.essar.com<br />
Slabs as semi finished products nominal maximum width 2040mm x nominal maximum length 4900mm to the above maximum thickness are approved for<br />
further processing for rolled products.<br />
Certificate No. MD00/2091/0008/1 Expiry date: 06/06/2015<br />
ESSAR STEEL INDIA LTD. Mumbai Plates<br />
Normal Strength<br />
A, B, D 70<br />
Plate Mill Division<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 40<br />
Tel: +91 261 668 3291 or 6739 Fax: +91 261 668 3747 Email mailto:sravinarayana.bhat@essar.com or rudrapatnam.balasubramaniam@essar.com Web<br />
http://www.essar.com<br />
All plates are restricted to a maximum width <strong>of</strong> 4550mm.<br />
Certificate Number: MD00/3979/002/1 Expiry: 17/01/2015<br />
FACOR STEELS LTD New Delhi<br />
MIDC Hingna Industrial Estate,<br />
Nagpur<br />
440028<br />
Tel No . +91 7104 235701-5 Fax No. +91 7104 235709<br />
Email info@{facorsteels.com<br />
Web site: www.facorsteel.com<br />
Certificate No MD00/3786/0001/1 Expiry date 18/05/2013<br />
ISMT LIMITED (STEEL PLANT) Pune<br />
Steelmaking<br />
Bars<br />
Steelmaking<br />
Semi-Finished<br />
Page<br />
E.A.F./A.O.D./Con Cast<br />
B.O.S/V.O.D./Con Cast<br />
Boiler & Pressure Vessels<br />
Austenitic Stainless<br />
Duplex Stainless<br />
Chain Cable Stock<br />
E.A.F. / Con Cast<br />
Blooms<br />
Bars<br />
32<br />
As below<br />
austenitic stainless, duplex stainless<br />
11CrMo91 45<br />
13CrMo45 50<br />
410AR, 460AR, 490 63<br />
304L, 316L 100<br />
UNS S31803 122<br />
U3 56<br />
U1, U2 80<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 225<br />
carbon, carbon-manganese, alloy 150<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
Morgaon Road<br />
Jejuri 412 303<br />
Pur<strong>and</strong>ara, Pune<br />
Maharashtra<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Tel: +91-020-26630144 / +91-020-26630714 Fax: +91-020-26630779 Email mailto: ln.hegde@ismt.co.in Web http://www.ismt.co.in<br />
Certificate number. MD00/3816/0001/1 Expiry date: 24/08/2013<br />
JINDAL STEEL & POWER LIMITED New Delhi<br />
Raigarh<br />
Post Box No.16<br />
Kharsia Road<br />
Raigarh 496001 Chattisgarh<br />
Steelmaking<br />
Plates<br />
Tel: +91 7762 227001 10 Fax: +91 7762 227021/22 Email to rksaini@jspl.com<br />
Certificate No. MD00/3542/0002/1 Expiry date: 02/08/2014<br />
JSL STAINLESS LTD. Yamunanagar<br />
Post Box No. 6<br />
O.P. Jindal Marg<br />
Hisar Haryana State<br />
India Pin 125 005<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
B.O.S./E.A.F./Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
E.A.F./A.O.D./Con Cast<br />
B.O.S/V.O.D./Con Cast<br />
Slabs<br />
Austenitic Stainless<br />
Tel: +91 1662 222471 - 83 ext 2336 Email: mailto:hsr.manishmittal@jslhsr.com Web Page www.jindalstainless.com<br />
Certificate No. MD00/3110/0003/1 Expiry date: 22/10/2013<br />
JSW STEEL LIMITED Mumbai<br />
Vidyanagar Works<br />
P.O. Vidyanagar<br />
Steelmaking<br />
583 275 Toranagallu<br />
Dist Bellary<br />
Karnataka<br />
Tel: +91 8395 250 120 Fax: +91 8395 250 114 Email: devasish.mishra@jsw.in Web: www.jsw.in<br />
Certificate No. MD00/3564/0001/1 Expiry date: 10/02/2012<br />
B.O.S. / Con Cast<br />
As Below<br />
A, B, D 80<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 80<br />
360AR, 410AR, 460AR, 360, 410, 460, 490, 360FG, 80<br />
410FG, 460FG, 490FG<br />
austenitic stainless<br />
austenitic stainless<br />
As below 160<br />
304L, 316L, 317L, 321, 347 53<br />
A, B, D, E, AH32, AH36, DH32, DH36, EH32,<br />
EH36<br />
KALYANI CARPENTER SPECIAL STEELS LTD. Pune<br />
Steelmaking<br />
E.A.F./Ingot/Con Cast As below<br />
Bars<br />
Semi-finished Products carbon, carbon-manganese, alloy 250<br />
Structural<br />
carbon, carbon-manganese, alloy 150<br />
Mundhwa<br />
Pune 411 036<br />
Tel: +91 20 9881132054 Fax: +91 20 26824483 Email: mailto:sdpawar@kcssl.com Web: http://www.kalyanicarpenter.com<br />
Certificate No. MD00/0815/0007/1 Expiry date: 23/08/2012<br />
NAVYUG SPECIAL STEEL PVT. LTD. Mumbai<br />
Khopoli Works<br />
Jagdish Nagar<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
Bars<br />
E.A.F. / Ingot<br />
Blooms/Billets<br />
Normal Strength<br />
Normal Strength<br />
Khopoli<br />
Dist. Raigad<br />
Maharashtra 410 216<br />
Tel: +91 952192 263318 (263347) Fax: +91 952192 263582 (263076) Email mailto:sarkar.samar@mahindra.com<br />
Web www.mahindra.com<br />
Certificate No. MD00/0971/0007/1 Expiry date: 17/07/2012<br />
STEEL AUTHORITY OF INDIA LTD. Bhilai<br />
Bhilai Steel Plant<br />
Bhilai 490 001<br />
Chhattisgarh<br />
Steelmaking<br />
Plates<br />
Tel +91 940 7981686 Fax +91 788 2222040 Email:mailto:gcdas@sail-bhilaisteel.com<br />
Certificate No. MD00/1433/0008/1 Expiry date: 28/04/2014<br />
STEEL AUTHORITY OF INDIA LTD. Calcutta<br />
Steelmaking<br />
Plates<br />
Page<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
33<br />
220<br />
As below<br />
alloy, austenitic stainless steel<br />
carbon, carbon-manganese 340<br />
A 50<br />
A 200<br />
As below<br />
A, B, D 75<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
50<br />
460FG, 490FG, 510FG 50<br />
360AR, 410AR, 360, 410 63<br />
360FG, 410FG 75<br />
As below<br />
A, B 52<br />
360, 410, 360FG, 410FG 35<br />
360AR, 410AR 40<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Rourkela Steel Plant<br />
Rourkela 769 011<br />
Orissa<br />
Tel +91 (0)661 2511210 Fax +91 (0)661 2510183<br />
Email mailto:s.mukhopadhyay@sailrp.co.in<br />
Certificate No. MD00/1434/0005/1 Expiry date: 24/06/2013<br />
TATA STEEL LIMITED Calcutta<br />
43 Chowringhee Road<br />
Kolkata 700 071<br />
Steelmaking<br />
Plates<br />
Hot Rolled Coil<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Tel: +91 (33) 22889251 Fax: +91 (33) 22887255/22881396 Email mailto:rakesh@itd.tatasteel.com Web http://www.tata.com<br />
Certificate No. MD00/1489/0006/1 Expiry date:15/02/2015<br />
U.P. STEELS New Delhi<br />
A Unit <strong>of</strong> ISGEC Heavy Engineering Limited<br />
Nara<br />
Meerut Road,<br />
Muzaffarnagar - 251 203<br />
Uttar Pradesh<br />
Tel +91 1396 252404/5/6 Fax + 91 1396 252324<br />
Email: qc@upsteels.com<br />
Web: www.upsteels.com<br />
Certificate No. MD00/1984/0003/1 Expiry date: 07/08/2014<br />
VIRAJ PROFILES LIMITED (SMS DIVISION) Mumbai<br />
G-2 / G23 MIDC, Tarapur Industrial Area,<br />
Boisar, Taluka - Palghar, Dist. Thane,<br />
Maharashtra - 401506,<br />
Steelmaking<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Ingot<br />
IF/AOD/Ingot/ConCast<br />
Blooms/Billets<br />
As below<br />
A 50<br />
360AR, 410AR 50<br />
A 12<br />
alloy<br />
austenitic stainless steel<br />
austenitic stainless steel 300<br />
Tel: +91 2525 261514 Fax: +91 2525 260159 Email mailto:quality@viraj.com Web: http://www.viraj.com<br />
Billets <strong>and</strong> blooms as semi-finished products to the above maximum thickness, nominal 300mm wide x nominal 9000mm long are approved for further<br />
processing for forged products.<br />
Certificate Number: MD00/2935/0004/1 Expiry date: 08/12/2014<br />
Welspun Corp Limited Mumbai<br />
(Plate & Coil Mills Division)<br />
Survey No. 659, Village: Versamedi,<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Taluka.: Anjar, Dist.: Kutch,<br />
Gujarat - 370110<br />
Tel: +91 2836 661728 - 4114 Fax: +91 2836 664141 Email: lakshminarasimham_b@welspun.com Web: http://www.welspuncorp.com<br />
Certificate Number: MD00/3887/0001/1 Expiry date: 28/02/2014<br />
Indonesia<br />
PT. GUNAWAN DIANJAYA STEEL Jakarta<br />
Jl. Margomulyo No. 29A<br />
Greges-Asemrowo<br />
Surabaya 60183<br />
Tel: +62 31 7490598 Fax: +62 31 7490581/7482109<br />
Email: mailto:gunawan@gds.co.id Web http://www.gunawansteel.com<br />
Certificate No. MD00/1882/0007/1 Expiry date: 16/12/2012<br />
PT. GUNUNG RAJA PAKSI Jakarta<br />
JI. Imam Bonjol 4, Warung Bongkok<br />
Desa Sukadanau, Clkarang Barat, Bekasi<br />
West Java, Indonesia<br />
Tel: +62 21 8900111 ext 3518 Fax: +62 21 8900333<br />
Email: mailto:dewi.pl@grdsteel.com<br />
Web: http://www.grdsteel.com<br />
Certificate No. MD00/2749/0003/1 Expiry date: 15/11/2013<br />
Plates<br />
Plates<br />
Hot Rolled Coil<br />
PT. JAYA PARI STEEL Tbk.<br />
Jl Margomulyo No. 4<br />
T<strong>and</strong>es<br />
Surabaya 80186<br />
Surabaya Plates<br />
Tel: +62 31 7491288 Fax:+62 31 7491714 Email:mailto:jayapari@red.net.id<br />
Certificate No. MD00/2304/0006/1 Expiry date: 26/04/2014<br />
Page<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
34<br />
A, B, D 50<br />
AH27S, AH32, DH27S, DH32 25<br />
460FG, 490FG 25<br />
360FG, 410FG 35<br />
B, D 25<br />
A 40<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 40<br />
360AR, 410AR 25<br />
A, B 50<br />
AH36, AH40, DH36, DH40, EH36, EH40 50<br />
360AR, 410AR 40<br />
A, B 16<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 14<br />
360AR, 410AR 16<br />
A, B 25<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
PT. KRAKATAU STEEL (PERSERO) Jakarta Steelmaking<br />
E.A.F. / Con Cast<br />
As below<br />
Plates<br />
Normal Strength<br />
A 25<br />
Italy<br />
Divisi P & PM (QA)<br />
Jl. Industri No. 5<br />
PO. Box 14<br />
Cilegon 42435<br />
Tel: +62 254 371047 Fax: +62 254 372725 Email: mailto:marsidon.s@krakatausteel.com Web: http://www.krakatausteel.com<br />
Certificate No. MD00/1183/0006/1 Expiry date: 02/02/2012<br />
A.B.S. Acciaierie Bertoli Safau S.p.A. Trieste<br />
Via Buttrio, 28<br />
33050 Pozzuolo del Friuli (UD)<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
E.A.F./Ingot/Con Cast<br />
Rolled Bars<br />
As Cast Round Section<br />
Rolled Square Bars<br />
Structural<br />
Machinery<br />
Chain Cable Stock<br />
Tel: +39 (0) 432 613 211 Fax: +39 (0) 432 613 249 E-mail: mailto:m.graffi@absacciai.it Web: http://www.absacciai.it<br />
Certificate No. MD00/0019/0008/1 Expiry date: 15/06/2014<br />
ACCIAIERIA DI RUBIERA S.p.A. Ravenna<br />
Via XXIV Aprile, 64<br />
42013 S. Donnino di Casalgr<strong>and</strong>e (R.E.)<br />
Steelmaking<br />
Semi-Finished<br />
Tel: +39 0522 997209 Fax: +39 0522 840040 Email: mailto:qa@acciaieriadirubiera.it<br />
Web http://www.acciaieriadirubiera.com<br />
Address for orders: Acciaieria di Rubiera S.p.A. , Via San Cataldo, 115, 41100 Modena, Italy.<br />
Certificate No. MD00/0038/0005/1 Expiry date: 08/03/2013<br />
ACCIAIERIA FONDERIA CIVIDALE S.P.A. Trieste<br />
Via delle Industrie<br />
Zona Industriale no. 40<br />
33043 Cividale del Friuli<br />
(Udine)<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F./Ingot/Con Cast<br />
Ingots<br />
Billets<br />
E.A.F. / Ingot<br />
Ingots<br />
As below<br />
Carbon, Carbon manganese, Alloy 370<br />
Carbon, Carbon-manganese, Alloy 700<br />
Carbon, Carbon-manganese, Alloy 420<br />
carbon, carbon-manganese, alloy 170<br />
carbon, carbon-manganese, alloy 170<br />
U1, U2, U3 78<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 100<br />
carbon, carbon-manganese, alloy 180<br />
As below, carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 35<br />
Steel types carbon, carbon-manganese <strong>and</strong> alloy cover the supply <strong>of</strong> ingots for processing into forgings according to the Society's Rules for the Manufacture,<br />
Testing <strong>and</strong> Certification <strong>of</strong> Materials, Chapter 5. The final processing mill is responsible for ordering steel which complies with their approved chemical<br />
composition <strong>and</strong> enables them to achieve the required mechanical properties<br />
Tel +39 432 706922 Fax +39 432 706920<br />
Email:mailto:afcspa@afcspa.com<br />
Web www.cividalespa.com<br />
Certificate No. MD00/3149/0002/1 Expiry date: 04/04/2011<br />
ACCIAIERIE VALBRUNA S.P.A. Venice<br />
Viale Della Scienza, 25 z.i.<br />
36100 Vicenza<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
E.A.F./Ingot/Con Cast<br />
Ingots<br />
Billets<br />
Machinery<br />
As below<br />
carbon, carbon-manganese, alloy, austenitic<br />
10<br />
stainless, duplex stainless<br />
carbon, carbon-manganese, alloy, austenitic 220<br />
stainless, duplex stainless<br />
austenitic stainless, precipitation hardened 155<br />
stainless*, martensitic stainless*<br />
duplex stainless 205<br />
Tel: +39 0444 968211 Fax: +39 0444 968182 Email:mailto:quality@valbruna.it Web:http://www.acciaierie-valbruna.com<br />
* Accepted for approved applications<br />
Approval for Precipitation Hardened Stainless Machinery Bar is for Grade 17.4 PH, approval for Martensitic Stainless Machinery Bar is for Grade 431 <strong>and</strong> Grade<br />
1.4418 Quenched <strong>and</strong> Tempered.<br />
Duplex Stainless Steel bars are not approved for use in welded construction, <strong>and</strong> weld repair is not permitted.<br />
Approval <strong>of</strong> Con cast material is for the production <strong>of</strong> Austenitic Stainless Steels only.<br />
Ingots as semi finished products nominal maximum dimensions 600mm x 530mm x 2060mm to the above maximum weight are accepted for further processing<br />
for rolled products <strong>and</strong> forgings.<br />
Billets as semi finished products nominal maximum width 220mm x nominal maximum length 6500mm to the above maximum thickness are accepted for<br />
further processing for rolled products <strong>and</strong> forgings.<br />
Certificate No. MD00/0041/0006/1 Expiry date: 02/06/2014<br />
ACCIAIERIE VALBRUNA S.P.A. Venice<br />
Steelmaking<br />
Bars<br />
Page<br />
E.A.F./Ingot/Con Cast<br />
A.O.D./Ingot/Con Cast<br />
Machinery<br />
35<br />
As below<br />
as below<br />
austenitic stainless, duplex stainless,<br />
precipitation hardened stainless*, martensitic<br />
stainless*<br />
73<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
Via A Volta 4<br />
39100 Bolzano<br />
39100 Bolzano<br />
* Accepted for approved applications<br />
Tel; +39 (0)471 924111 Fax: +39 (0)471 924355<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Email: mailto:info@valbruna.it Web: http//www.acciaierie-valbruna.it<br />
Certificate No. MD00/2994/0004/1 Expiry date: 26/06/2015<br />
ACCIAIERIE VENETE S.p.A. Venice<br />
Camin Works<br />
Riviera Francia, 9<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
E.A.F. / Con Cast<br />
Blooms/Billets<br />
As Cast Round Section<br />
Semi-finished Products<br />
Structural<br />
Machinery<br />
35020 Camin (Padova)<br />
Tel +39 (0)49 8282 820 Fax +39 (0)49 8282 666 Email: mailto:commercial.dep@acciaierievenete.com Web: http://www.acciaierievenete.com<br />
Certificate No. MD00/0042/0006/1 Expiry date: 26/03/2015<br />
Approval does not cover bars with a diameter <strong>of</strong> less than 65mm.<br />
AFV ACCIAIERIE BELTRAME S.p.A. Venice<br />
Viale della Scienza 81/A<br />
36100 Vicenza<br />
Tel +39 0444 967111 Fax +39 0444 967137<br />
Email: mailto:info@beltrame.it<br />
Web site http://www.beltrame.it<br />
Certificate No. MD00/0047/0007/1 Expiry date: 22/02/2015<br />
AFV ACCIAIERIE BELTRAME S.p.A. Venice<br />
Stabilimento di Marghera<br />
Via del Commercio, 15<br />
30175 Marghera (VE)<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
Bars<br />
Tel +39 041 2583711 Fax +39 041 2583819<br />
E-mail:mailto:info@beltrame.it<br />
Web www.beltame.it<br />
Certificate No. MD00/1374/0006/1 Expiry date: 09/02/2015 *Enhanced Survey*<br />
AFV ACCIAIERIE BELTRAME S.p.A. Viareggio<br />
S.Giovanni Valdarno Plant<br />
Piazza Matteotti 13,<br />
52027 S.Giovanni Valdarno (AR)<br />
Tel No: +39 (0) 444 967125 Fax + 39 (0) 444 967137<br />
Email p.pierrat@beltrame.it<br />
Web:www.beltrame.it<br />
Certificate no MD00/37710001/1 Expiry date: 07/04/2013<br />
ARMANDO CIMOLAI CENTRO SERVIZI Srl Trieste<br />
Via Masieres, No.32<br />
33080 San Quirino (PN)<br />
Tel: +39 (0)434 919292 Fax: +39 (0)434 919266<br />
Email: accs_sanquirino@comolai.com<br />
Certificate No. MD00/2620/0005/1 Expiry date: 01/12/2014<br />
ASO SIDERURGICA S.r.L. Brescia<br />
Unipersonale<br />
Via Seriola no. 122<br />
Sections<br />
Fabricated Sections<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
E.A.F. / Ingot<br />
Ingots<br />
25035 Ospitaletto<br />
Brescia<br />
Tel: +39 (0)30 6841011-(0)30 6841165 Fax: +39 (0)30 6841012 Email: mailto:Info@aso.it Web: http://www.aso.it<br />
Certificate No. MD00/0020/0005/1 Expiry date: 15/04/2014<br />
CIMOLAI S.p.A<br />
Via Tessere 9<br />
33070 - Polcenigo (PN)<br />
Trieste Fabricated Sections Normal Strength<br />
Higher Strength<br />
Tel: +39 (0)434 748822 Fax: +39 (0)434 749139 Email mailto:stab_polcenigo@cimolai.com Web http://www.cimolai.com<br />
Certificate No. MD00/2617/0005/1 Expiry date: 01/12/2011<br />
COGNE ACCIAI SPECIALI S.p.a Milan<br />
Steelmaking<br />
Semi-Finished<br />
Page<br />
E.A.F. / Con Cast<br />
E.A.F. / Ingot<br />
Ingots<br />
Billets<br />
Bars<br />
36<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon manganese, Alloy 280<br />
Carbon, Carbon-manganese, Alloy 600<br />
carbon, carbon-manganese, alloy 200<br />
carbon, carbon-manganese, alloy 180<br />
carbon, carbon-manganese, alloy 130<br />
As below<br />
Normal strength, Higher Strength 220<br />
A, B, D, E 20<br />
AH32, AH36, DH32, DH36 20<br />
A, B, D, E 40<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 40<br />
A, B, D 8<br />
AH32, AH36, DH32, DH36 8<br />
A, B, D 22<br />
AH32, AH36, DH32, DH36 22<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 65<br />
A, B, D 22<br />
AH32, AH36, DH32, DH36 22<br />
austenitic stainless, duplex stainless<br />
martensitic stainless*<br />
austenitic stainless, duplex stainless 4<br />
Martensitic Stainless Steel* 160<br />
austenitic stainless, duplex stainless 270<br />
Martensitic Stainless Steel* 220<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
Via Paravera,16<br />
11100 AOSTA<br />
Tel No: +39 165 3021 Fax no: +39 165 302423<br />
Email: info@cogne.com<br />
Web site: www.cogne.com<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Certificate No.MD00/3809/0001/1 Expiry date 14/07/2013<br />
EUROGROUP S.p.A. Trieste<br />
Via Timavo - Z. I. Lisert<br />
34074 MONFALCONE (GO)<br />
Fabricated Sections<br />
Normal Strength<br />
Higher Strength<br />
Tel: +39 481 495111 Fax: +39 481 495112 Email: eurogroup@eurogroupspa.com Web: http://www.eurogroupspa.com<br />
Certificate No. MD00/2781/0004/1 Expiry date: 19/02/2013<br />
EVRAZ PALINI E BERTOLI S.P.A. Trieste<br />
Via E. Fermi, 28 - 33058<br />
San Giorgio di Nogaro (UD)<br />
Tel: +39 0431 62 3111 Fax: +39 0431 62 1244<br />
Email: info@paliniebertoli.it web:<br />
www.paliniebertoli.it<br />
Certificate No. MD00/1809/0007/1 Expiry date: 09/06/2014<br />
G. BAGLIETTO S.a.s. NAVAL STEEL Genoa<br />
Via Castelgazzo 11<br />
Novi Ligure (AL)<br />
Certificate No. MD00/3910/0001/1 Expiry date: 16.05.2014<br />
ILVA S.p.A. Taranto<br />
Taranto Works<br />
Via Appia KM 648<br />
Taranto 74100<br />
Plates<br />
Fabricated Sections<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Hot Rolled Coil<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
Tel: +39 02 307 00 775 Fax: +39 02 307 00 285<br />
Email: mailto:commerciale.lamiere@rivagroup.com<br />
Web: http://www.rivagroup.com<br />
Specified through thickness properties for grade D, E, AH, DH <strong>and</strong> EH notation Z35 may be added<br />
Certificate No. MD00/2276/0006/1 Expiry date: 11/10/2015<br />
LUCCHINI RS S.p.A. Brescia<br />
Steelmaking<br />
E.A.F. / Ingot<br />
Via G. Paglia N.45<br />
24065 Lovere<br />
Bergamo<br />
Tel: +39 035 963535 Fax: +39 035 963488 Email: mailto:s.cantini@lucchiniRS.it Web: http://www.lucchiniRS.it<br />
Certificate No. MD00/0949/0007/1 Expiry date: 19/03/2015<br />
METINVEST TRAMETAL S.p.A. Trieste<br />
Via Enrico Fermi, 44<br />
33058 San Giorgio di Nogaro (UD)<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
<strong>Approved</strong> for Z grade plates with specified through thickness properties when tested in accordance with Rules requirements.<br />
Tel: +39 010 57 62911 Fax: +39 010 57 62990 Email:mailto:rre@trametal.it Web:http://www.trametal.it<br />
Certificate No. MD00/2004/0007/1 Expiry date: 02/08/2014<br />
A, D 50<br />
AH36, DH36 50<br />
A 30<br />
AH32, AH36 30<br />
A 20<br />
AH36, DH36, EH36 20<br />
As below<br />
Normal strength, Higher Strength 303<br />
A, B, D, E 80<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 80<br />
EH27S, EH32, EH36<br />
A 10<br />
AH27S, AH32, AH36 10<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless<br />
A, B, D, E 60<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
60<br />
360FG, 410FG, 460FG, 490FG, 510FG 60<br />
NLMK VERONA Venice Steelmaking<br />
E.A.F. / Ingot<br />
As below<br />
Semi-Finished Ingots<br />
carbon, carbon-manganese 32<br />
Via A, Salieri, 22,<br />
37050 Vallese di Oppeano (Verona)<br />
Tel: +39 045 699 7900 Fax: +39 045 699 7901 email: verona@eu.nlmk.com Web: http://www.eu.nlmk.com/verona/<br />
Ingots as semi finished products are approved for further processing for forgings to the above maximum weight. Round <strong>and</strong> Polygon ingots to nominal<br />
maximum dimensions <strong>of</strong> 1200mm diameter x 4750mm length, oblong ingots to nominal maximum dimensions 970mm x 870mm x 2050mm.<br />
Certificate Number MD00/3985/0001/1 Expiry date: 31/01/2015<br />
OFFICINE NORD EST S.r.l Trieste<br />
Fabricated Sections<br />
Via Ungaresca No.12<br />
33080 San Quirino (Pn)<br />
Tel: +39 (0)434 919091 Fax: +39 (0)434 918646 Email to: info@<strong>of</strong>ficinenordest.it<br />
Certificate No. MD00/2626/0006/1 Expiry date: 07/12/2014<br />
Page<br />
Normal Strength<br />
Higher Strength<br />
37<br />
A, B, D, E 50<br />
AH32, AH36, DH32, DH36, EH32, EH36 50<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
OLIFER-ACP S.P.A. Brescia Sections<br />
Normal Strength<br />
A, B, D 8<br />
Higher Strength<br />
AH32, AH36, DH32, DH36 8<br />
ROLLING MILL - ODOLO<br />
Brescia Work<br />
Loc.Motta Alta, 14<br />
24050 Cividate Al Piano<br />
Bergamo<br />
Tel +39 365 826088 Fax +39 365 860727 Email: mailto:olifer@mail.olifer.com Web:http://www.olifer.com<br />
Certificate No. MD00/1147/0007/1 Expiry date: 31/03/2015<br />
OLIFER-ACP S.P.A. Brescia<br />
STEELMAKING<br />
Bergamo Works<br />
Loc. Motta Alta 14<br />
Cividate Al Piano<br />
Tel: +39 363 97193/4 Fax: +39 363 976666<br />
Email: mailto:direzione-cividate@olifer.com<br />
Web http://www.olifer.com<br />
Certificate No. MD00/1807/0007/1 Expiry date: 12/03/2015<br />
PALESCANDOLO SPA Naples<br />
Via Bosc<strong>of</strong>angone, zone A.S.I., Nola<br />
Certificate No. MD00/3850/0001/1 Expiry date: 31/10/2013<br />
SIDERVAL S.P.A. Milan<br />
Steelmaking<br />
Semi-Finished<br />
Fabricated Sections<br />
Sections<br />
E.A.F./Ingot/Con Cast<br />
Ingots<br />
Blooms/Billets<br />
Normal Strength<br />
Higher Strength<br />
Higher Strength<br />
Via Roma 39C<br />
23018 Talamona<br />
Sondrio<br />
Tel: +39 342 674125 Fax: +39 342 670400 Email: mailto:siderval@siderval.it Web: http://www.siderval.it<br />
Certificate No. MD00/2857/0004/1 Expiry date: 16/01/2014<br />
Japan<br />
AICHI STEEL CORPORATION Kobe<br />
Chita Plant<br />
1, Wano-Wari<br />
Arao-machi<br />
Tokai-shi<br />
Aichi-ken, 476-8666<br />
Tel: +81 52 603 9353 Fax: +81 52 603 9898<br />
Email: mailto:nagayama@he.aichi-steel.co.jp<br />
Web: www.aichi-steel.co.jp<br />
Certificate No. MD00/0076/0007/1 Expiry date: 24/09/2015<br />
AICHI STEEL CORPORATION Kobe<br />
Kariya Plant<br />
3-6, Toyota-cho<br />
Kariya-shi<br />
Aichi-ken<br />
448-0848<br />
Tel +81 566 21 9130 Fax +81 566 23 6925<br />
Email: mailto:hiroaki.k@he.aichi-steel.co.jp<br />
Web www. aichi-steel.co.jp<br />
Certificate No. MD00/0078/0006/1 Expiry date: 23/09/2015<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Bars<br />
E.A.F. / Ingot<br />
Bars<br />
Normal Strength<br />
Austenitic Stainless<br />
Machinery<br />
Chain Cable Stock<br />
Austenitic Stainless<br />
As below<br />
carbon, carbon-manganese, alloy 54<br />
carbon, carbon-manganese 120<br />
A 25<br />
AH32, AH36 25<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
carbon, carbon-manganese, austenitic stainless<br />
alloy 190<br />
A 180<br />
304L, 316L 180<br />
carbon, carbon-manganese, alloy, austenitic 125<br />
stainless<br />
U1, U2, U3 120<br />
304L, 316L 150<br />
ASIA SPECIAL STEEL CO. LTD. Nagasaki Steelmaking<br />
E.A.F. / Ingot<br />
As below<br />
Semi-Finished Ingots<br />
carbon, carbon-manganese, alloy 48<br />
43-1 Koyomachi, Wakamatsu-ku,<br />
Kitakyushu, Fukuoka 808-0002,<br />
Tel: +93 482 2222 Fax: +93 482 2227 Email: hayashi.k@asiass.co.jp Web: www.asiass.co,jp<br />
Semi finished products as ingots, nominal 1600mm diameter x 3100mm high to maximum weight shown above, are approved for further processing forgings.<br />
The scope <strong>of</strong> approval also includes for the provision <strong>of</strong> molten steel for production <strong>of</strong> steel castings to Kotobuki Industries Co. Ltd. Kitakyushu Works (LR<br />
Plant Reference M3800).<br />
Certifcate Number: MN00/3796/0003/1 Expiry date: 29/06/2013<br />
Page<br />
38<br />
30<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
CHUBU STEEL PLATE CO., LTD. Kobe<br />
Steelmaking<br />
E.A.F. / Con Cast<br />
As below<br />
Plates<br />
Normal Strength<br />
A, B 50<br />
5-1, Kousudori<br />
Nakagawa-ku<br />
Nagoya<br />
Boiler & Pressure Vessel 360AR, 410AR 40<br />
Tel: +81 52 661 3818 Fax: +81 52 661 2265 Email: mailto:aki-onozato@chubukohan.co.jp Web http://www.chubukokan.co.jp<br />
Certificate No. MD00/0309/0006/1 Expiry date: 20/04/2014<br />
DAIDO STEEL CO., LTD. Kobe<br />
Chita Plant<br />
39, Motohama-machi<br />
Tokai-shi<br />
Aichi-ken<br />
Tel: +81 562 33 3106 Fax: +81 562 33 6598<br />
Email:h-fujita@ac.daido.co.jp<br />
Web: http://www.daido.co.jp<br />
Certificate No. MD00/0372/0005/1 Expiry date: 21/03/2014<br />
DAIDO STEEL CO., LTD. Kobe<br />
Hoshizaki Plant<br />
2-30, Daido-cho<br />
Minami-ku<br />
Nagoya-shi<br />
Tel: +81 52 611 2525 Fax: +81 52 611 2528<br />
EMail:y-ichihara@ac.daido.co.jp<br />
Web:http://www.daido.co.jp<br />
Certificate No. MD00/0373/0005/1 Expiry date: 27/02/2014<br />
DAIDO STEEL CO., LTD. Yokohama<br />
Shibukawa Plant<br />
500, Ishihara<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Bars<br />
Steelmaking<br />
Shibukawa-shi<br />
Gunma 377-0007<br />
Tel: +81 279 25 2009 Fax: +81 279 25 2043 Email: mailto:t-furuse@ac.daido.co.jp<br />
Certificate No. MD00/0375/0005/1 Expiry date: 27/11/2012<br />
DAISAN STEEL Co., Ltd. Yokohama<br />
Shinsuna Works<br />
3-2-1, Shinsuna<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
E.A.F. / Ingot<br />
Ingots<br />
Blooms<br />
Billets<br />
Structural<br />
Structural<br />
Machinery<br />
E.A.F. / Ingot<br />
E.A.F. / Con Cast<br />
Billets<br />
Kohto-ku<br />
Tokyo 136-0075<br />
Tel: +81 (0)3 3644 1101 Fax: +81 (0)3 3664 1100 Email: mailto:sshimomura@daisan-seiko.co.jp<br />
web: www.daisan-seiko.co.jp<br />
Certificate No. MD00/0381/0006/1 Expiry date: 26/02/2015<br />
GODO STEEL LTD. Kobe<br />
2946 Nakashima Shikamaku<br />
Himeji-city<br />
Hyogo pref.<br />
Tel. +81 (0)792 34 9332 Fax +81(0)792 34 9538<br />
Certificate No. MD00/0606/0006/1 Expiry date: 06/08/2015<br />
HITACHI METALS, LTD. Kobe<br />
Yasugi Works<br />
2107-2, Yasugi-cho<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
Bars<br />
Steelmaking<br />
Bars<br />
Normal Strength<br />
E.A.F. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Normal Strength<br />
Chain Cable Stock<br />
E.A.F. / Ingot<br />
Normal Strength<br />
Structural<br />
Yasugi-shi<br />
Shimane-ken<br />
Tel: +81 (0) 854 22 1908 Fax: +81 (0)854 23 0281 Email mailto:hitoshi.iwata@hitachi-metals.co.jp Web http://www.hitachi-metals.co.jp<br />
Certificate No. MD00/0678/0005/1 Expiry date: 20/12/2012<br />
JFE BARS & SHAPES CORPORATION Kobe<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
Page<br />
E.A.F. / Con Cast<br />
Blooms/Billets<br />
Normal Strength<br />
Higher Strength<br />
39<br />
As below<br />
carbon, carbon-manganese 7<br />
carbon, carbon-manganese 275<br />
carbon, carbon-manganese 148<br />
carbon, carbon-manganese 270<br />
carbon, carbon-manganese 160<br />
carbon, carbon-manganese 160<br />
carbon, carbon-manganese, alloy<br />
As below<br />
Normal Strength 170<br />
A, B 28<br />
As below<br />
carbon, carbon-manganese 490<br />
A 15<br />
A 150<br />
U3 100<br />
U1, U2 150<br />
As below<br />
A 150<br />
alloy, austenitic stainless 150<br />
As below, carbon, carbon-manganese<br />
carbon, carbon manganese 300<br />
B, D, E 25<br />
A 32<br />
EH32, EH36 25<br />
AH32, AH36, DH32, DH36 32<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Himeji Works<br />
1280, Hosoe<br />
Shikama-ku<br />
Himeji 672-8064<br />
Tel +81 (0)792 35 6376 Fax +81 (0)792 35 2048 email: mailto:hiroshi-satou@jfe-bs.co.jp Internet http://www.jfe-bs.co.jp<br />
Certificate No. MD00/1535/0006/1 Expiry date: 27/08/2012<br />
JFE BARS & SHAPES CORPORATION Yokohama<br />
Kashima Works<br />
7 Minamihama, Kamisu-city<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
E.A.F. / Con Cast<br />
Billets<br />
Normal Strength<br />
Higher Strength<br />
As below<br />
carbon, carbon-manganese 150<br />
A 32<br />
AH32, AH36, DH32, DH36 32<br />
Ibaraki Pref.<br />
314-0111<br />
Tel: +81 (0)299 90 5218 Fax: +81 (0)299 90 5201 Email: mailto:yoshiaki-maki@jjfe-bs.co.jp<br />
Semi finished products as billets to nominal 150mm width <strong>and</strong> 12000mm nominal length to the maximum thickness shown above are approved for further<br />
processing for rolled products.<br />
Certificate No. MD00/1920/0005/1 Expiry date: 29/01/2014<br />
JFE STEEL CORPORATION Kobe<br />
West Japan Works (Kurashiki)<br />
1 Mizushima<br />
Steelmaking<br />
Plates<br />
Hot Rolled Coil<br />
Sections<br />
Bars<br />
B.O.S./E.A.F./Ingot/Con Cast As Below<br />
Normal Strength<br />
A, B, D, E 200<br />
Higher Strength<br />
AH42, FH27S, FH32, FH36 50<br />
DH42, DH46, DH50, DH55, DH62, DH69, EH42,<br />
EH46, EH50, EH55, EH62, EH69<br />
75<br />
AH40, DH40, EH40 80<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
150<br />
Boiler & Pressure Vessel 360AR, 410AR 40<br />
360, 410 100<br />
360FG, 410FG, 460FG, 490FG, 510FG 134<br />
Ferritic Low Temperature 9Ni 40<br />
LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,<br />
LTFH27S, LTFH32, LTFH36<br />
50<br />
Austenitic Stainless<br />
Clad<br />
Tapered<br />
Differential Thickness<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
Structural<br />
Kawasaki-Dori<br />
Kurashiki<br />
Tel: +81 (0)86 447 2730 Fax: +81 (0)86 447 2735 Email: mailto:ma-inoue@kawasaki-steel.co.jp<br />
Specified through thickness properties on all plate grades.<br />
Certificate No. MD00/0838/0021/1 Expiry date: 16/11/2012<br />
MQS <strong>Approved</strong> - Approval No. MQS 022<br />
JFE STEEL CORPORATION Kobe<br />
Steelmaking<br />
Plates<br />
Hot Rolled Coil<br />
Page<br />
Machinery<br />
Chain Cable Stock<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Austenitic Stainless<br />
Clad<br />
Differential Thickness<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
40<br />
304L, 316L 50<br />
E/304L, E/316L 30<br />
A, B, D, AH27S, AH32, AH36, DH27S, DH32,<br />
DH36, EH27S, EH32, EH36<br />
50<br />
A, B, D, AH27S, AH32, DH27S, DH32 40<br />
A, B 16<br />
360, 410 16<br />
A, B, D 32<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
32<br />
carbon, carbon-manganese 400<br />
alloy 165<br />
carbon-manganese 190<br />
U1, U2 130<br />
As below<br />
A, B, D, E 120<br />
AH32S 55<br />
AH46S*, DH46S*, EH46S* 75<br />
AH27S, AH32, AH36, AH40, DH27S, DH32, 80<br />
DH36, DH40, EH27S, EH32, EH36, EH40, FH27S,<br />
FH32, FH36, FH40<br />
360AR, 410AR 40<br />
460FG, 490FG, 510FG 55<br />
360FG, 410FG 70<br />
LTAH27S, LTAH32, LTAH36, LTAH40,<br />
40<br />
LTDH27S, LTDH32, LTDH36, LTDH40,<br />
LTEH27S, LTEH32, LTEH36, LTEH40, LTFH27S,<br />
LTFH32, LTFH36<br />
304L, 304LN, 316L, 316LN, 317L, 317LN 55<br />
A to EH36/304L, A to EH36/316L 30<br />
A, DH34S, EH34S, B, D, A,B, A,B,D,E, AH32,<br />
AH36, DH32, DH36, EH32, EH36, AH34S<br />
50<br />
A, B, D, E 12<br />
AH27S, AH32 8<br />
460FG, 490FG 8<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Japan<br />
JFE STEEL CORPORATION Kobe<br />
West Japan Works (Fukuyama)<br />
1, Kokan-cho<br />
Hot Rolled Coil<br />
Sections<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
Ferritic Low Temperature<br />
Fukuyama-city<br />
Hiroshima-pref.<br />
721-8510<br />
Tel. (0)84 945 3160 Fax (0)84 945 3101 EMail mailto:k-nibu@jfe-steel.co.jp Web http://www.jfe-steel.co.jp<br />
MQS <strong>Approved</strong> - Approval No. MQS 005<br />
Certificate No. MD00/1055/0010/1 Expiry date: 17/10/2012<br />
JFE STEEL CORPORATION Yokohama<br />
East Japan Works (Keihin)<br />
1-1, Ohgishima<br />
Steelmaking<br />
Plates<br />
Tapered Plates max<br />
Tapered Plates max<br />
Kawasaki-ku<br />
Kawasaki<br />
210-0868<br />
Tel: +81 44 322 1185 Fax: +81 44 322 1510 Email: mailto:m-toyonag@jfe-steel.co.jp<br />
All plate grades with specified through thickness properties.<br />
Materials Quality Scheme <strong>Approved</strong> - Approval No. MQS 034<br />
Certificate No. D00/1056/0007/1 Expiry date: 30/10/2012<br />
JFE STEEL CORPORATION Yokohama<br />
East Japan Works (Chiba)<br />
1, Kawasaki-cho<br />
Steelmaking<br />
Semi-Finished<br />
Chuo-ku<br />
Chiba 260-0835<br />
Tel: +81 43 262 2287 Fax: +81 43 262 2980 Email to: mas-oota@jfe-steel.co.jp<br />
Certificate No.: MD00/4065/0001/1 Expiry Date: 07/08/2015<br />
KOBE STEEL LTD. Kobe<br />
Steelmaking<br />
Plates<br />
Hot Rolled Coil<br />
Page<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Normal Strength<br />
Higher Strength<br />
Higher strength<br />
B.O.S/V.O.D./Con Cast<br />
Slabs<br />
B.O.S. / Con Cast<br />
B.O.S. / Ingot<br />
E.A.F. / Con Cast<br />
E.A.F. / Ingot<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Differential Thickness<br />
Normal Strength<br />
41<br />
360, 410, 360FG, 410FG 12<br />
E 18<br />
A, B, D 35<br />
AH40, DH40, EH40, FH27S, FH32, FH36 18<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 36<br />
EH27S, EH32, EH36<br />
LTAH27S, LTAH32, LTAH36, LTAH40,<br />
18<br />
LTDH27S, LTDH32, LTDH36, LTDH40,<br />
LTEH27S, LTEH32, LTEH36, LTEH40, LTFH27S,<br />
LTFH32, LTFH36<br />
As below<br />
A, B, D, E 100<br />
FH27S, FH32, FH36 42<br />
AH42, DH42, EH42 83<br />
AH27S, AH32, AH36, AH40, DH27S, DH32,<br />
DH36, DH40, EH27S, EH32, EH36, EH40<br />
90<br />
360AR, 410AR 40<br />
360, 410, 460FG, 490FG, 510FG 50<br />
360FG, 410FG 100<br />
LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,<br />
LTFH27S, LTFH32, LTFH36<br />
42<br />
D, E 40<br />
A, B 50<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36, AH40, DH40, EH40<br />
50<br />
AH32, AH36 22<br />
austenitic stainless<br />
austenitic stainless 275<br />
As below<br />
As below<br />
As below<br />
As below<br />
A, B, D, E 150<br />
DH42, DH50, DH55, DH62, DH69, EH42, EH50, 50<br />
EH55, EH62, EH69, FH40, FH42, FH46, FH50,<br />
FH55, FH62, FH69<br />
AH46, DH46, EH46 60<br />
AH40, DH40, EH40 80<br />
FH27S, FH32, FH36 90<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
100<br />
360AR, 410AR, 460AR 40<br />
360, 410, 460, 490, 460FG, 490FG, 510FG 90<br />
360FG, 410FG 100<br />
LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,<br />
LTFH27S, LTFH32, LTFH36<br />
90<br />
A,B, D,E, HTS up to EH36 50<br />
A, B, D 13<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Japan<br />
KOBE STEEL LTD. Kobe<br />
Kakogawa Works<br />
1 Kanazawa-cho<br />
Kakogawa-city<br />
Hyogo-pref.<br />
Hot Rolled Coil<br />
Tel: +81 794 36 1151 Fax: +81 794 36 2079 Email: mailto:aa14011@steel.kobelco.co.jp<br />
All grades with specified through thickness properties.<br />
Certificate No. MD00/0863/0008/1 Expiry date: 16/10/2012<br />
Materials Quality Scheme <strong>Approved</strong> - Approval No. MQS 009<br />
KOBE STEEL LTD. Kobe<br />
Kobe Works<br />
2 Nadahama-Higashimachi<br />
Nada-ku<br />
Kobe<br />
Tel +81 78 882 8056 Fax +81 78 882 8204<br />
Email: mailto:horikawa.kenichi@steel.kobelco.co.jp<br />
Certificate No. MD00/0864/0007/1 Expiry date: 08/08/2014<br />
KYOEI STEEL LTD. Nagasaki<br />
Yamaguchi Division<br />
Oaza Onoda 6289-18<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Steelmaking<br />
Sections<br />
Bars<br />
Boiler & Pressure Vessel<br />
B.O.S./Ingot/Con Cast<br />
Ingots<br />
Rolled Blooms<br />
Semi-finished Products<br />
Normal Strength<br />
Machinery<br />
Chain Cable Stock<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Normal Strength<br />
Sanyo-Onoda City<br />
Yamaguchi Prefecture<br />
756-0817<br />
Tel: +81 836 83 6172 Fax: +81 836 83 0839 Email mailto:hyamashita@kyoeisteel.co.jp Web http://www.kyoeisteel.co.jp<br />
Certificate No. MD00/1892/0005/1 Expiry date: 21/03/2013<br />
MITSUBISHI STEEL MFG. CO., LTD. Yokohama<br />
Hirota Works<br />
405, Aza Rokucho<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Ingot<br />
Hirota, Kawahigashi-machi<br />
Aizuwakamatsu-city<br />
Fukushima Pref. 969-3471<br />
tel: +81 (0) 242 75 3111 Fax: +81 (0) 242 75 2619 Email mail to: Suzuki.toshihiro@mitubishisteel.co.jp or yoshida.yuji@mitubishisteel.co.jp Web:<br />
http://www.mitsubishisteel.co.jp<br />
Ingots nominal 2050mm diameter x nominal 1250mm length to the above maximum weight are approved for further processing forgings.<br />
Certificate Number: MD00/1802/0001/1 Expiry: 03/03/2015<br />
MITSUBISHI STEEL MURORAN INC. Yokohama<br />
Muroran Works<br />
12, Nakamachi<br />
Semi-Finished<br />
Bars<br />
Ingots<br />
Ingots<br />
Blooms/Billets<br />
Structural<br />
Machinery<br />
Muroran shi<br />
Hokkaido<br />
050-0087<br />
Tel: +81 (0)143 41 2838 Fax: +81 (0)143 41 2869 Email mailto:chino.katsuhiko@mitsubishisteel.co.jp<br />
Certificate No. MD00/1893/0006/1 Expiry date: 09/04/2013<br />
NIHON STEEL CO., LTD.<br />
11, Rinkai-cho<br />
Kishiwada City<br />
Osaka<br />
Kobe<br />
Bars<br />
tel: +81 724 23 5151 Fax: +81 724 39 8357 Email mailto:matsukura@nihon-steel.co.jp<br />
Certificate No. MD00/2299/0004/1 Expiry date: 12/03/2011<br />
NIPPON METAL INDUSTRY CO., LTD. Kobe<br />
Kinuura Works<br />
1, Hama-cho<br />
Steelmaking<br />
Hot Rolled Coil<br />
Hekinan-shi<br />
Aichi- ken<br />
447-8610<br />
Tel: +81 566 48 7218 Fax: +81 566 48 1596 Email: mailto:hayashik@nikkinko.co.jp<br />
Certificate No. MD00/2338/0006/1 Expiry date: 26/05/2014<br />
Page<br />
Normal Strength<br />
E.A.F. / Con Cast<br />
Austenitic Stainless<br />
42<br />
360FG, 410FG 13<br />
As below<br />
carbon, carbon-manganese, alloy 8<br />
Carbon, Carbon-Manganese, Alloy 600<br />
carbon, carbon-manganese, alloy 250<br />
A 250<br />
carbon, carbon-manganese, alloy 250<br />
U1, U2, U3 160<br />
As below<br />
A 16<br />
A 53<br />
As below<br />
carbon, carbon-manganese 16<br />
as below 20<br />
As below 515<br />
carbon, carbon-manganese, alloy 270<br />
carbon, carbon-manganese, alloy 210<br />
A 38<br />
As below<br />
304L, 316L, 321, 347 8<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
NIPPON STEEL & SUMIKIN Nagasaki Plates<br />
Austenitic Stainless<br />
304L, 304LN, 316L, 316LN, 317L, 317LN, 321,<br />
347, 304*, 316*<br />
55<br />
Duplex Stainless<br />
UNS S31803 40<br />
Clad<br />
A/304L, D/304L, D/316L 40<br />
STAINLESS STEEL CORPORATION<br />
Yawata Works<br />
2108-1, Oaza Maeda Aza Hato<br />
Yawata Higashi-ku<br />
Kitakyushu City, Fukuoka Pref.<br />
* Grades 304,.<strong>and</strong> 316 may be accepted for approved applications.<br />
Tel; +81 93 672 2290 Fax: +81 93 672 2251<br />
Email: mailto:gohnome.fuminori@ns-sc.co.jp<br />
web: ns-sc.co.jp/en/company/plants/yawata.php<br />
Certificate No. MD00/1105/0009/1 Expiry date: 23/05/2015<br />
NIPPON STEEL & SUMIKIN Nagasaki<br />
STAINLESS STEEL CORPORATION<br />
Production Division, Hikari Works<br />
3434 Shimata<br />
Hikari City<br />
Yamaguchi 743-8550<br />
Tel +81 833 71 5184 Fax +81 833 71 5215<br />
Email: mailto:shimixu.tsunehiro@na-sc.nsc.co.jp<br />
Web: http://www.ns-sc.co.jp<br />
Certificate No. MD00/3196/0003/1 Expiry date: 25/10/2014<br />
NIPPON STEEL & SUMITOMO METAL<br />
CORPORATION<br />
Yokohama<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Hot Rolled Coil<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Sections<br />
Plates from coils<br />
Hot Coiled Strip<br />
Page<br />
E.A.F. / Con Cast<br />
Slabs<br />
Austenitic Stainless<br />
Austenitic Stainless<br />
B.O.S. / Con Cast<br />
Slabs<br />
Blooms/Billets<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Tapered<br />
Differential Thickness<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Boiler <strong>and</strong> Pressure Vessel<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
43<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless<br />
austenitic stainless 236<br />
304L, 316L 8<br />
304L, 316L 8<br />
As below<br />
As below<br />
carbon, carbon-manganese 300<br />
carbon, carbon-manganese, alloy 165<br />
A, B, D, E 100<br />
AH42, DH42, EH42, FH42 50<br />
AH46, AH50, DH46, DH50, EH46, EH50, FH46,<br />
FH50<br />
70<br />
AH40, DH40, EH40, FH40 80<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36, FH27S, FH32, FH36<br />
100<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 100<br />
LHAH42, LTAH46, LTAH50, LTDH42, LTDH46,<br />
LTDH50, LTEH42, LTEH46, LTEH50, LTFH42,<br />
LTFH46, LTFH50<br />
LTAH40, LTDH40, LTEH40, LTFH40 80<br />
LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,<br />
LTFH27S, LTFH32, LTFH36<br />
50<br />
100<br />
A,B,D,E, HTS up to EH40 50<br />
A,B,D,E, HTS up to EH40 50<br />
A, B, D 24<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 19<br />
A, B 12<br />
360, 410 12<br />
A, B 25<br />
360, 410 25<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Kimitsu Works<br />
1 Kimitsu<br />
Kimitsu-shi<br />
Chiba-ken<br />
299-1141<br />
Materials Quality Scheme approved - MQS001<br />
Materials Quality Scheme covers Steelmaking <strong>and</strong> rolled plates only. Strip, plate cut from coil <strong>and</strong> sections approved under Materials Survey Scheme (direct<br />
survey).<br />
All plate grades with specified through thickness properties.<br />
Tapered plates in transverse <strong>and</strong> longditudinal directions.<br />
High strength fine grained Ti+Nb steel plates produced in the TM + Acc <strong>and</strong> TM + Acc + Temper conditions up to 70mm thickness are approved with Mn <strong>and</strong><br />
Al contents to be outside that given in <strong>Lloyd's</strong> <strong>Register</strong> Materials Rules. Letter 'S' is used after identification number <strong>of</strong> non-st<strong>and</strong>ard composition materials.<br />
Tel: +81 (0)439 50 2194 Fax: +81 (0)439 55 8727 Email: mailto:kurogi.yasuo@nsc.co.jp Web http://www.nsc.co.jp/kimitsu/<br />
Certificate No. MD00/1100/0011/1 Expiry date: 18/06/2014<br />
NIPPON STEEL & SUMITOMO METAL<br />
CORPORATION<br />
Muroran Works<br />
12, Naka-machi<br />
Yokohama<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
B.O.S./E.A.F./Ingot/Con Cast<br />
Billets<br />
Normal Strength<br />
Higher Strength<br />
Chain Cable Stock<br />
As Below<br />
carbon, carbon-manganese, alloy 190<br />
A, B 200<br />
AH32, AH36, DH32 200<br />
U1, U2, U3, R3, R3S, R4 136<br />
API-2F 152<br />
Muroran City<br />
Hokkaido<br />
050-8550<br />
Tel: +81 (0)143 47 2337 Fax: +81 (0)143 47 2783 Email: maruyama.kenichi.nsc.co.jp Web: http://www.nsc.co.jp/muroran<br />
The approval for bars intended for chain cable stock are for material rolled from continuous casting billets only.<br />
Bars for mooring grade chain cable stock in grades R3, R3S <strong>and</strong> R4 are restricted to Hamanaka Chain Mfg. Co. Ltd. Himeji plant only.<br />
Bars in Grade U3 in the above supply condition may be accepted up to 200mm diameter for the further processing for the production <strong>of</strong> forged chain cable<br />
fittings.<br />
Approval for billets, maximum 190mm x 190mm x 8000mm maximum weight 2.3 Tonnes, as semi finished products are for further processing for forgings.<br />
Certificate Number: MD00/1101/0011/1 Expiry date: 02/07/2014<br />
NIPPON STEEL & SUMITOMO METAL<br />
CORPORATION<br />
Nagoya Works<br />
3, 5 Chome<br />
Kobe<br />
Steelmaking<br />
Plates<br />
Tokai-machi<br />
Tokai-city<br />
Aichi Pref. 476-8686<br />
Tel +81 52 603 7225 Fax +81 52 603 7229<br />
Email: okayama@nagoya.nsc.co.jp<br />
All grades <strong>and</strong> thicknesses with specified through thickness properties (Z35)<br />
Certificate No. MD00/1102/0009/1 Expiry date: 17/07/2013<br />
Page<br />
B.O.S./Ingot/Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
44<br />
As below<br />
A, B, D, E 130<br />
FH27S 40<br />
AH40, DH40 50<br />
DH42, DH46, EH40, EH42, FH32, FH36, FH40,<br />
FH42<br />
70<br />
EH46, EH46S*, FH46, FH46S* 110<br />
DH50, DH55, DH62, DH69 200<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
210<br />
360AR, 410AR 40<br />
360, 410 115<br />
360FG, 410FG, 460FG, 490FG, 510FG 120<br />
LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,<br />
LTFH27S, LTFH32, LTFH36<br />
40<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
NIPPON STEEL & SUMITOMO METAL<br />
CORPORATION<br />
Nagasaki Steelmaking<br />
B.O.S. / Con Cast<br />
As below<br />
Plates<br />
Normal Strength<br />
A, B, D, E 100<br />
Oita Works<br />
1, Oaza Nishinotsu<br />
Hot Rolled Coil<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Tapered<br />
Differential Thickness<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
DH42, EH42, FH42 50<br />
EH40S* 60<br />
AH47, DH47, EH47, AH47-W430, DH47-W430,<br />
EH47-W430, EH47-W140, DH47-W140,<br />
AH47-W140<br />
AH40, DH40, EH40, FH27S, FH32, FH36, FH40 80<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
100<br />
360AR, 410AR, 460AR 40<br />
360, 410, 460, 490 90<br />
360FG, 410FG, 460FG, 490FG, 510FG 100<br />
LTAH27S, LTAH32, LTAH36, LTAH40,<br />
LTDH27S, LTDH32, LTDH36, LTDH40,<br />
LTEH27S, LTEH32, LTEH36, LTEH40, LTFH27S,<br />
LTFH32, LTFH36, LTFH40<br />
A, B, D, E, A,B,D,E, AH27S, AH32, AH36,<br />
DH27S, DH32, DH36, EH27S, EH32, EH36<br />
50<br />
A,B,D 35<br />
A,B, A,B,D,E, AH27S, AH32, AH36, DH27S, 50<br />
DH32, DH36, EH27S, EH32, EH36<br />
A 12<br />
AH27S, AH32, AH36 12<br />
360FG, 410FG, 460FG, 490FG, 510FG 12<br />
Oita City<br />
Oita Prefecture<br />
Tel +81 97 553 2122 Fax +81 97 553 2379 Email: mailto:saitoh.shuntaroh@oita.nsc.co.jp Web http://www.nsc.co.jp/oita/<br />
All plates with specified through thickness properties except H47 grades.<br />
* Plates in LLF27 <strong>and</strong> LLF33 up to a maximum thickness <strong>of</strong> 40 mm can be accepted for approved applications.<br />
* Plates in EH40S are for approved applications only <strong>and</strong> may have a Nickel content up to 1.5% with a carbon equivalent <strong>of</strong> 0.4%. The <strong>Approved</strong> thickness<br />
range <strong>of</strong> EH40S is 30mm to 60mm.<br />
* Plates in the H47 grades to be produced to the agreed chemistry ranges <strong>and</strong> agreed max CEVs.<br />
Materials Quality Scheme <strong>Approved</strong> - Approval No. MQS010<br />
Certificate No. MD00/1103/0015/1 Expiry date: 31/03/2013<br />
NIPPON STEEL & SUMITOMO METAL<br />
CORPORATION<br />
Sakai Works<br />
1, Chikko Yawata-cho Sakai-Ku<br />
Sakai City<br />
Osaka<br />
Kobe<br />
Tel: +81 722 33 1179 Fax: +81 722 33 1185<br />
Certificate No. MD00/1104/0005/1 Expiry date: 09/07/2012<br />
NIPPON STEEL & SUMITOMO METAL<br />
CORPORATION<br />
Yokohama<br />
Sections<br />
Steelmaking<br />
Plates<br />
Page<br />
Normal Strength<br />
Higher Strength<br />
B.O.S. / Con Cast<br />
A.O.D./Con Cast<br />
Normal Strength<br />
Higher Strength<br />
45<br />
A, B, D, E 50<br />
AH32, AH36, DH32, DH36, EH32, EH36 50<br />
carbon, carbon-manganese, alloy<br />
austenitic stainless<br />
A, B, D, E 150<br />
AH32S 30<br />
FH27S 32<br />
FH32, FH36 40<br />
AH42, AH46, AH50, AH55, AH62, DH42, DH46,<br />
DH50, DH55, DH62<br />
47<br />
AH36S, AH40S, DH36S, DH40S, EH36S, EH40S 50<br />
AH36, AH40, DH36, DH40, EH27S, EH32, EH36,<br />
EH40<br />
70<br />
80<br />
105<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Japan<br />
NIPPON STEEL & SUMITOMO METAL<br />
CORPORATION<br />
Kashima Works<br />
3 Hikari<br />
Yokohama<br />
Plates<br />
Sections<br />
Hot Coiled Strip<br />
Kashima City<br />
Ibaraki Pref.<br />
314-0014<br />
Tel +81 (0)299 84 2573 Fax +81 299 84 2945<br />
Email mailto: furakawa-jun@sumitomometals.co.jp Web http://www.sumitomometals.co.jp<br />
All plates with specified through thickness properties.<br />
Materials Quality Scheme <strong>Approved</strong> - Approval No. MQS 002<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Clad<br />
Differential Thickness<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
AH27S, AH32, DH27S, DH32 150<br />
360AR, 410AR, 460AR 40<br />
510FG 55<br />
360, 410, 460, 490 63<br />
360FG, 410FG, 460FG, 490FG 100<br />
3.5Ni, 5Ni 30<br />
LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,<br />
LTFH27S, LTFH32, LTFH36<br />
EH36/304L, EH36/316L 38<br />
EH27S, EH32, EH36 32<br />
A,B,D, AH27S, AH32, AH36, DH27S, DH32,<br />
DH36<br />
35<br />
A, B, D, E 35<br />
AH40, DH40, EH27S, EH32, EH36 18<br />
DH27S, DH32, DH36 20<br />
AH27S, AH32, AH36 35<br />
A, B, D 19<br />
360FG, 360, 410FG, 410 19<br />
SMI's Fatigue Crack Arrester (FCA) grades by the DAC process with parent plate fatigue crack growth rates guaranteed by the manufacturer <strong>and</strong> tested in<br />
accordance with ASTM E647 may be accepted for approved applications. Properties are to be as agreed with the Society. This acceptance does not imply<br />
concessions on either design or survey requirements.<br />
SMI's High Welding Heat Input Steel, may be accepted for approved applications, in all higher tensile strength grades up to EH40, in the TM + ACC condition<br />
up to 105 mm thickness, when used in accordance with SMI's guidelines for welding or line heating. This acceptance does not imply concessions on either<br />
design or survey requirements.<br />
SMICORE, may be accepted for approved applications, in all higher tensile strength grades up to EH36, in the TM condition up to 20mm thickness <strong>and</strong> the TM<br />
+ ACC condition up to 30 mm thickness. The steel is to have a guaranteed CRL <strong>of</strong> 0.5 or less <strong>and</strong> to be <strong>of</strong> approved composition. This acceptance does not<br />
imply concessions on either design or survey requirements.<br />
(Note CRL = Corrosion Ratio by Long term test)<br />
Certificate No. MD00/1454/0016/1 Expiry date: 09/07/2013<br />
NIPPON STEEL & SUMITOMO METAL<br />
CORPORATION<br />
Pipe & Tube Unit<br />
Amagasaki Works<br />
Kobe<br />
Bars<br />
Normal Strength<br />
1, Nishino-cho<br />
Higashi-Mukojima<br />
Amagasaki, 660-0856<br />
Tel: +81 (0)6 6411 7616 Fax: +81 (0)6 6411 7612 Email: mailto:furubaya-hdy@sumitomometals.co.jp<br />
Certificate No. MD00/1458/0007/1 Expiry date: 14/11/2013<br />
NIPPON STEEL & SUMITOMO METAL<br />
CORPORATION<br />
Kobe<br />
Steelmaking<br />
Page<br />
B.O.S. / Con Cast<br />
A.O.D./Con Cast<br />
46<br />
A 240<br />
carbon, carbon-manganese, alloy<br />
austenitic stainless<br />
45<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Wakayama Works<br />
1850 Minato<br />
Wakayama-city<br />
640-8555<br />
Tel: +81 (0) 73451 1133 Fax: +81 734 51 1103 EMail: mailto:kondou-tmo@sumitomometals.co Sales fax +81 34416 6789 Web: www.sumitomometals.co.jp<br />
Certificate No. MD00/1748/0009/1 Expiry date: 26/06/2013<br />
NIPPON YAKIN KOGYO Co., Ltd. Yokohama<br />
KAWASAKI PLANT<br />
4-2, Kojima-cho<br />
Kawasaki-ku<br />
Kawasaki-shi<br />
Kanagawa - ken 210-8558<br />
Tel: +81 44 271 3045 Fax: +81 44 271 3034<br />
Email mailto:kensuke.miura@nyk.co.jp<br />
Web http//www.nyk.co.jp<br />
* accepted for approved applications<br />
Certificate No. MD00/1109/0007/1 Expiry date: 01/06/2015<br />
OJI STEEL CO., LTD. Yokohama<br />
Gunma Works<br />
120, Nittasorimachi-cho<br />
Ota-city<br />
Gunma Pref.<br />
370-0313<br />
Tel: +81 276 56 2119 Fax: +81 276 56 3136<br />
Email: mailto:y-yamazaki@oji-steel.co.jp<br />
Web: www. oji-steel.co.jp<br />
Certificate No. MD00/1141/0006/1 Expiry date: 15/10/2014<br />
OSAKA STEEL CO., LTD. Kobe<br />
Sakai Works<br />
1 Chikko Yawata-cho<br />
Sakai<br />
Osaka<br />
Tel +81 722 33 3901 Fax +81 722 33 3976<br />
Certificate No. MD00/0821/0006/1 Expiry date: 20/06/2013<br />
OSAKA STEEL CO., LTD. Kobe<br />
Osaka - Okajima Works<br />
9-3 Minami Okajima 1 Chome<br />
Taisho-ku<br />
Osaka 551-0021<br />
Tel: +81 06 6552 1447 Fax: +81 06 6552 3184<br />
Email: ko-kisimoto@osaka-seitetsu.co.jp<br />
Web :www.osaka-seitetu.co.jp<br />
Certificate No. MD00/1157/0005/1 Expiry date: 21/05/2013<br />
SANYO SPECIAL STEEL CO., LTD., Kobe<br />
3007 Nakashima<br />
Shikama-ku<br />
Himeji-shi<br />
672-8677<br />
Tel: +81 (0)792 35 6029 Fax: +81 (0)792 35 6027<br />
Email: ymatsunag@himeji.sanyo-steel.co.jp<br />
Web: http://www.sanyo-steel.co.jp<br />
Certificate No. MD00/1307/0010/1 Expiry date: 3/11/2013<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Hot Rolled Coil<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Sections<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Page<br />
E.A.F. / Con Cast<br />
Slabs<br />
Austenitic Stainless<br />
Fe-Ni alloys<br />
Austenitic Stainless<br />
Fe-Ni alloys<br />
E.A.F. / Con Cast<br />
Billets<br />
Normal Strength<br />
Higher Strength<br />
E.A.F. / Con Cast<br />
Billets<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
E.A.F. / Con Cast<br />
E.A.F. / Ingot<br />
Ingots<br />
Blooms<br />
Normal Strength<br />
Machinery<br />
Chain Cable Stock<br />
47<br />
As below<br />
As below, austenitic stainless 200<br />
321, 347 10<br />
304L, 316L 53<br />
Fe-36Ni* 8<br />
304L, 316L, 321, 347 8<br />
Fe-36Ni* 3<br />
As below<br />
carbon, carbon-manganese 170<br />
A 25<br />
AH32, AH36 25<br />
A<br />
A 185<br />
As below<br />
A, B, D 15<br />
AH32, AH36 12<br />
alloy<br />
As below<br />
carbon, carbon-manganese, austenitic stainless 15<br />
carbon, carbon-manganese, alloy, austenitic 380<br />
stainless<br />
A 220<br />
alloy 125<br />
U1, U2, U3 136<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
SHINKANSAI STEEL CORPORATION Kobe<br />
Steelmaking<br />
E.A.F. / Con Cast<br />
As below<br />
Sections<br />
Normal Strength<br />
A, B, D 38<br />
Higher Strength<br />
AH32, AH36, DH32, DH36 38<br />
Sakai Works<br />
5, Shiohama-cho<br />
Sakai<br />
Osaka<br />
Tel: +81 (0)72 228 5121 Fax: +81 (0)72 228 7119 Email: mailto:h-ue@shinkansai-steel.co.jp Web: http://www.shinkansai-steel.co.jp<br />
Certificate No. MD00/0823/0006/1 Expiry date: 15/11/2014<br />
SHINKANSAI STEEL CORPORATION Kobe<br />
Hoshida Works<br />
4-26-1, Hoshida Kita<br />
Katano-shi<br />
Tel: +81 (0)72 891 0624 Fax: +81 (0)72 893 1319<br />
Email mailto:h-ito@shinkansai-steel.co.jp<br />
Web http://www.shikansai-steel.co.jp<br />
Certificate No. MD00/1244/0007/1 Expiry date: 06/10/2015<br />
THE JAPAN STEEL WORKS LTD. Yokohama<br />
Muroran Plant<br />
4, Chatsu-machi<br />
Steelmaking<br />
Sections<br />
Bars<br />
Steelmaking<br />
Plates<br />
Muroran<br />
Hokkaido<br />
051-8505<br />
Tel +81 (0)143 22 0451 Fax +81 (0)143 22 5736 Email: mailto:kenji_tanaka@jsw.co.jp<br />
Certificate No. MD00/1507/0006/1 Expiry date: 11/11/2012<br />
TOKAI SPECIAL STEEL CO., LTD. Kobe<br />
3, 5-Chome<br />
Tokai-Machi<br />
Tokai-shi<br />
Aichi-ken<br />
Tel +81 52 603 7236 Fax +81 52 603 7229<br />
EMail: saeki.osamu@nsc.co.jp<br />
Certificate No. MD00/1542/0005/1 Expiry date: 04/02/2014<br />
TOKYO STEEL MANUFACTURING CO., LTD. Nagasaki<br />
Kyushu Plant<br />
3-5-1, Minami-Futajima<br />
Wakamatsu-ku<br />
Kitakyusyu City<br />
Fukuoka 808-0109<br />
Tel: +81 93 701 2631 Fax: 81 93 791 2639<br />
Email: mailto:fukui@tokyosteel.co.jp<br />
Web http://www.tokyosteel.co.jp<br />
Certificate No. MD00/1550/0008/1 Expiry date: 29/06/2014<br />
TOPY INDUSTRIES, LTD. Kobe<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Plates<br />
Sections<br />
Steelmaking<br />
Sections<br />
Bars<br />
Page<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Chain Cable Stock<br />
E.A.F. / Ingot<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Austenitic Stainless<br />
Clad<br />
B.O.S. / Con Cast<br />
Blooms<br />
Billets<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Ferritic Low Temperature<br />
Normal Strength<br />
Higher Strength<br />
48<br />
As below<br />
A, B, D 32<br />
AH32, AH36, DH32, DH36 32<br />
U1, U2, U3 80<br />
As below<br />
A, B, D, E 50<br />
AH32, AH36, DH32, DH36, EH32, EH36 50<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 50<br />
304L, 316L 65<br />
AH32/304L, AH32/316L, AH32/316LN,<br />
AH32/317L<br />
19<br />
AH32/S31803 30<br />
A/304L, B/304L, D/304L, E/304L, A/316L,<br />
B/316L, D/316L, E/316L<br />
100<br />
carbon, carbon-manganese<br />
carbon, carbon-manganese 370<br />
carbon, carbon-manganese 155<br />
As below<br />
A, B, D 32<br />
360AR, 410AR 32<br />
A 24<br />
As below<br />
E 20<br />
A, B, D 35<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 20<br />
EH27S, EH32, EH36, FH27S, FH32, FH36<br />
LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
20<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,<br />
LTFH27S, LTFH32, LTFH36<br />
A, B, D, E 50<br />
AH32, AH36, DH32, DH36, EH32, EH36 50<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Toyohashi Works<br />
1, Akemi-cho<br />
Toyohashi-shi<br />
Aichi-ken<br />
Tel +81 532 25 1111 Fax +81 532 25 7401<br />
Email: mailto: m-takeuchi@topy.co.jp<br />
web: http://www.topy.co.jp<br />
Certificate No. MD00/1555/0006/1 Expiry date: 18/06/2011<br />
YAMATO STEEL CO., LTD. Kobe<br />
Steelmaking<br />
Sections<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
380, Kibi, Ohtsu-ku<br />
Himeji City<br />
Hyogo-pref.<br />
Tel: +81 (0)79 273 0716 Fax: +81 (0)79 272 0914 Email mailto: knakaue@yamatosteel.co.jp Web:http://www.yamatokogyo.co.jp<br />
Certificate No. MD00/1687/0009/1 Expiry date: 21/06/2014<br />
Korea<br />
BUSAN STEEL CO., LTD. Busan Port<br />
1538-2, Songjung-Dong<br />
Gangseo-Gu<br />
Tel: +82 51 (0)3251131<br />
Certificate No. MD00/4028/0001/1 Expiry date: 24/06/2015<br />
DK CORPORATION Ulsan<br />
#612-1, Go Hyun Ri<br />
Chung Ha Myun<br />
Buk-Ku, Pohang Gyeongsangbuk-do<br />
Tel: +82 54 245 3063 Fax: +82 54 245 3065<br />
Email:mailto:kscohn@dkcsteel.com<br />
Web:http://www.dkcsteel.com<br />
Certificate No. MD00/2230/0005/1 Expiry date: 30/05/2013<br />
DONGKUK STEEL MILL Co. Ltd. Ulsan<br />
Pohang Works<br />
880 Songdong-Ri<br />
Daesong-Myun, Nam-Gu<br />
Pohang City, Kyungsangbuk-Do<br />
Plates from coils<br />
Plates<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Sections<br />
Austenitic Stainless Steel<br />
Austenitic Stainless<br />
Duplex Stainless<br />
E.A.F. / Con Cast<br />
Blooms/Billets<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Normal Strength<br />
Higher Strength<br />
Tel: +82 542 715684 Fax: +82 542 715317 EMail: jongho.chun@dongkuk.com Web page http://www.dongkuksteel.co.kr<br />
Certificate No. MD00/0414/0012/1 Expiry date: 15/05/2013<br />
Billets to 150 x 150mm, Blooms to 200 x 250 & 250 x 300, Beam Blanks to 400 x 480 x 120mm.<br />
DONGKUK STEEL MILL Co. Ltd. Seoul<br />
Dangjin Works<br />
400, Hanjin-ri,<br />
Songak-eup, Dangjin-kun,<br />
Chungnam<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Tel: +82 (0) 41 351 4677 Fax: +82 (0) 41 351 4692 Email: sungchul.jeon@dongkuk.com Web: http://dongkuksteel.com<br />
Certifcate Number: MD00/3773/0006/1 Expiry: 12/04/2013<br />
Page<br />
49<br />
As below<br />
A, B, D, E 25<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 25<br />
EH27S, EH32, EH36<br />
304L, 304LN, 316L, 316LN, 317L, 317LN, 321,<br />
347<br />
304L, 304LN, 316L, 316LN 80<br />
UNS S31803, UNS 32900*, UNS 32205* 50<br />
carbon-manganese<br />
carbon-manganese 480<br />
D, E 50<br />
A, B 83<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36, FH27S, FH32, FH36<br />
50<br />
460FG, 490FG, 510FG 35<br />
360AR, 410AR 40<br />
360FG, 410FG 50<br />
LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,<br />
LTFH27S, LTFH32, LTFH36<br />
50<br />
D 25<br />
A, B 32<br />
AH27S, DH32 25<br />
AH32, DH27S 32<br />
A, B, D, E 83<br />
AH32, AH36, AH40, DH32, DH36, DH40, EH32,<br />
EH36, EH40<br />
83<br />
460AR 35<br />
360AR, 410AR 40<br />
490FG 50<br />
460FG, 510FG 70<br />
360FG, 410FG 83<br />
As at 06 November 2012<br />
8
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
DONGYANG S.TEC. CO., LTD<br />
#619-12, Munduk-Ri,<br />
Ocheon-Eup Nam-Gu,<br />
Pohang-city, Kyeongbuk,<br />
Tel: +82 54 292 6181 Fax: +82 54 291 6548<br />
Ulsan<br />
Plates from coils Normal Strength<br />
A 20<br />
Certifcate Number: MD00/3840/0002/1 Expiry date: 27/09/2013<br />
Dong il Steel Co., Ltd. Busan Port<br />
Sasang Works<br />
230-4 Hakjang-Dong<br />
Sasang-gu<br />
Busan<br />
Sections<br />
Normal Strength<br />
Higher Strength<br />
Tel: +82 (0) 51 313 2881 Fax: +82 (0) 51 313 2889 Email mailtio:sasang@nate.com Web:http://www.dongilsteel.com<br />
Certificate No. MD00/3174/0004/1 Expiry date: 06/08/2014<br />
FINE BESTEEL CO LTD Changwon<br />
25-1 Ha-Ri, Changnyeong-Up,<br />
Changnyeong-Gun,<br />
Gyeongnam,<br />
Tel: +82 (0)55 259 2000 / 2064 Fax: +82 (0)55 259 2060<br />
Email: hselfgod@finebesteel.com<br />
Web www.fine-besteel.com<br />
Certificate No. MD00/3659/0004/1 Expiry date: 08/09/2015<br />
Sections<br />
HAMSCO CO., LTD.<br />
San 93, Mokhyun-ri, Hyuchun-myun<br />
Hamyang-kun<br />
Kyungnam<br />
Changwon Steelmaking<br />
Semi-Finished<br />
Tel: +82 55 964 8000 Fax: +82 55 964 8011 Mail to: iyy9702@naver.com<br />
Certificate No. MD00/3872/0001/1 Expiry date: 05/01/2014<br />
HYUNDAI STEEL COMPANY Seoul<br />
Inchon Plant<br />
#1, Songhyun-Dong<br />
Dong-Ku<br />
Inchon<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
Normal Strength<br />
Higher Strength<br />
E.A.F. / Ingot<br />
Ingots<br />
E.A.F./Ingot/Con Cast<br />
Ingots<br />
Blooms<br />
Billets<br />
Normal Strength<br />
Higher Strength<br />
A 15<br />
AH32, AH36 16<br />
B, D, E 18<br />
A 30<br />
AH27S, AH32, AH36 30<br />
As below<br />
carbon, carbon-manganese, alloy 80<br />
As below<br />
carbon, carbon-manganese, alloy 75<br />
carbon, carbon-manganese 270<br />
carbon, carbon-manganese 200<br />
A, B 32<br />
AH27S, AH32, AH36 32<br />
Tel: +82 32 760 2753 Fax: +82 32 760 2866 Email: arom@hyundai-steel.com Web: http://www.hyundai-steel.com<br />
Sections include flat bars up to 400 mm width.<br />
Approval for Ingots as Semi-finished Products, Ingots, is for further processing as Forgings.<br />
Blooms <strong>and</strong> Billets as semi finished products are approved for further processing for rolled products to maximum thickness shown above, to nominal width<br />
400mm for blooms, 200mm for billets <strong>and</strong> nominal 10000mm length.<br />
Certificate No. MD00/0754/0007/1 Expiry date: 03/01/2014<br />
HYUNDAI STEEL COMPANY Ulsan<br />
Pohang Plant No. 1<br />
444 Songnae-Dong<br />
Nam-Gu<br />
Pohang<br />
Tel: +82 54 271 1479 Fax: +82 54 271 1512<br />
Email: mailto:2007372@hyundai-steel.com<br />
Web: http://www.hyundai-steel.com<br />
Certificate No. MD00/0819/0013/1 Expiry date: 07/06/2013<br />
HYUNDAI STEEL COMPANY Ulsan<br />
Pohang Plant No. 2<br />
1857 Jang Heung-Dong<br />
Tel No. +82 54 271 1479 Fax No. +82 54 271 1512<br />
Email mailto:2007372@hyundai-steel.com<br />
Web: www.hyundai-steel.com<br />
Certificate No. MD00/3084/0005/1 Expiry date: 07/06/2013<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
Bars<br />
Steelmaking<br />
Sections<br />
Page<br />
E.A.F. / Con Cast<br />
Blooms/Billets<br />
Normal Strength<br />
Higher Strength<br />
Ferritic Low Temperature<br />
Chain Cable Stock<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
50<br />
As below<br />
carbon, carbon-manganese, alloy<br />
B, D, E 18<br />
A 37<br />
AH27S, AH40, DH27S, DH40, EH27S, EH32, 18<br />
EH36, EH40, FH27S, FH32, FH36, FH40<br />
AH32, AH36, DH32, DH36 37<br />
LTAH27S, LTAH32, LTDH27S, LTDH32,<br />
18<br />
LTEH27S, LTEH32, LTFH27S, LTFH32, LTFH36,<br />
LTFH40<br />
R3S, R4 110<br />
U1, U2, U3, R3 150<br />
carbon-manganese<br />
A, B, D 16<br />
AH27S, AH32, AH36 16<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
HYUNDAI STEEL COMPANY Seoul<br />
Steelmaking<br />
B.O.S./E.A.F./Con Cast As Below<br />
Semi-Finished Slabs<br />
Normal strength, Higher Strength 300<br />
Hot Rolled Coil Normal Strength<br />
A, B 22<br />
Higher Strength<br />
AH32, AH36 22<br />
Plates from coils Normal Strength<br />
A, B 22<br />
Higher Strength<br />
AH32, AH36 22<br />
HR Coil Plant<br />
Kodae-Ri<br />
Songak-Myeon<br />
Dangjin-Gun<br />
Chungnam<br />
Tel: +82 41 680 1691 Fax +82 41 680 1699 Email; jwmking@hyundai-steel.com Web: http://www.hyundai-steel.com<br />
Slabs as semi finished products nominal 2200mm width x nominal 4400mm length are approved for further processing for rolled products, to the above<br />
maximum thickness produced by B.O.S Steelmaking <strong>and</strong> to 210mm maximum thickness produced by E.A.F. Steelmaking.<br />
Certificate No. MD00/3446/0003/1 Expiry date: 24/03/2014<br />
HYUNDAI STEEL COMPANY Seoul<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
A, B, D, E 83<br />
FH32, FH36 40<br />
AH27S, AH32, AH36, AH40, DH27S, DH32,<br />
DH36, DH40, EH27S, EH32, EH36, EH40<br />
83<br />
360AR, 410AR, 460AR 40<br />
360FG, 410FG, 460FG, 490FG 83<br />
LTDH27S, LTDH32, LTDH36, LTFH27S,<br />
LTFH32, LTFH36<br />
40<br />
Dangjin Works<br />
167-32, Godae-Ri<br />
Tel: +82 41 680 1680 or 1685 Fax +82 41 680 1699 Email; sbpark@hyundai-steel.com or jwmking@hyundai-steel.com Web: http://www.hyundai-steel.com<br />
Approval is restricted to plates produced with steel made by the BOF + con cast processing route.<br />
Approval for plates in grades AH27S, AH32, AH36, 360AR, 410AR, <strong>and</strong> 460AR as rolled fine grain Al+V are restricted to the thickness range 20.0mm to<br />
35.0mm.<br />
Approval for plates in grades AH27S, AH32, AH36, AH40, DH27S, DH32, DH36, DH40, EH27S, EH32, EH36, EH40 for the TM+Acc fine grain Al+Nb+Ti<br />
supply condition are restricted to the thickness range >15.0mm to 83.0mm.<br />
Approval for plates in grades LTDH27S, LTDH32, LTDH36, LTFH27S, LTFH32, LTFH36 for the TM+Acc fine grain Al+Nb+Ti supply condition are restricted to<br />
the thickness range >15.0mm to 40.0mm.<br />
Approval for plates in Normalising Rolled condition are restricted to maximum 3200mm width.<br />
Plates with specified through thickness properties may be accepted with the suffix Z35 applied to Higher Strength Grades in the TM+acc Fine Grain Al+Nb+Ti<br />
supply condition <strong>and</strong> TM Fine Grain Al+Nb+Ti supply condition .<br />
Certificate Number: MD00/3761/0007/1 Expiry: 25/03/2013<br />
JEENYANG IND. Co., Ltd. Ulsan<br />
446, Bonchon-Dong<br />
Yeongcheon-City,<br />
Keongbuk,<br />
Tel: +82 (0)54 335 3500 Fax: +82 (0)54 335 0355<br />
Email: dhshon@jysteel.com Web: www.jysteel.com<br />
Cert No MD00/3897/0001/1 Expiry date: 23/03/2014<br />
KISCO Changwon<br />
N° 70, Shinchon-dong<br />
Changwon<br />
Kyungnam<br />
Tel +82 55 260 0746 Fax +82 55 282 4123<br />
mail mailto:ojyworld@kisco.co.kr<br />
Web page http://www.kisco.co.kr<br />
Including steelmaking<br />
Certificate No. MD00/0884/0004/1 Expiry date: 12/01/2015<br />
KOREA STEEL SHAPES CO., LTD Busan Port<br />
Noksan Works<br />
1660-1 Songjeong-Dong<br />
Gangseo-Gu<br />
Busan<br />
Bars<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
Bars<br />
Machinery<br />
E.A.F. / Ingot<br />
Ingots<br />
Normal Strength<br />
Normal Strength<br />
Higher Strength<br />
Tel: +82 51 310 8912 Fax: +82 51 831 3957 Email mailto:nam001@yahoo.co.kr Web http://www.ekosco.com<br />
Certificate No. MD00/3096/0005/1 Expiry date: 08/05/2013<br />
KOREA STEEL SHAPES CO., LTD Changwon<br />
Chilseo Works<br />
68, Gyenae-Ri, Chilseo-Myeon<br />
Haman-Gun<br />
Gyeongnam<br />
Tel: +82 55 589 1159<br />
Certificate No. MD00/3097/0001/1 Expiry date: 11/10/2014<br />
Steelmaking<br />
Semi-Finished<br />
Page<br />
E.A.F. / Con Cast<br />
Billets<br />
51<br />
alloy 120<br />
As below<br />
carbon, carbon-manganese, alloy 140<br />
A 15<br />
A 65<br />
AH32 30<br />
As below<br />
A, AH32, AH36, carbon, carbon-manganese 220<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
KWANG JIN IND CO. LTD. Busan Port Bars<br />
Machinery<br />
austenitic stainless 85<br />
alloy 93<br />
carbon, carbon-manganese 100<br />
307-103 Shinpyeong-dong,<br />
Saha-gu,<br />
Busan,604-030<br />
Tel No: +82 51 204 9101 Fax No. +82 51 204 9109<br />
Email: ksm1481@kjsteel.co.kr<br />
Web Address www.kjsteel.co.kr<br />
Cert No MD00/3758/0001/1 Expiry date 15.03.2013<br />
POSCO Gwangyang Works Changwon Steelmaking<br />
B.O.S. / Con Cast<br />
As below<br />
Semi-Finished Slabs<br />
Normal strength, Higher Strength 300<br />
Plates<br />
Normal Strength<br />
A, B, D, E 100<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
100<br />
Boiler & Pressure Vessel 360AR, 410AR, 360FG, 410FG, 460FG, 490FG,<br />
510FG<br />
35<br />
Hot Rolled Coil Normal Strength<br />
A, B, D 22<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 12<br />
Boiler & Pressure Vessel 360AR, 410AR 12<br />
700 Kumho-dong<br />
Kwangyang-si<br />
Cheonnam 545-711<br />
Tel: +82 61 790 2170 Fax: +82 61 790 2909 Email: mailto:ssyang@posco.com Web: http://www.posco.com<br />
The supply <strong>of</strong> semi-finished products, slabs, nominal 1750mm wide x 6000mm long x 20 tonnes, for supply for further processing for rolled products.<br />
Hot rolled coils in normal strength grades in the supply condition thermomechanical fine grain aluminium are restricted to the thickness ranges >12 to 22mm.<br />
Certificate Number: MD00/3086/0008/1 Expiry: 14/07/2014<br />
POSCO Pohang Works Ulsan<br />
Steelmaking<br />
Plates<br />
Hot Rolled Coil<br />
B.O.S./E.A.F./Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Austenitic Stainless<br />
Duplex Stainless<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Austenitic Stainless<br />
5, Dongcheon-Dong<br />
Nam-ku, Pohang City,<br />
Kyungsangbuk-Do<br />
Tel: +82 2 3457 1586 Fax: +82 2 3457 1981 Email: mailto:bumstar@posco.co.kr Web: http://www.posco.co.kr/posco-in<br />
All plates with specified through thickness properties except AH46S, DH46S <strong>and</strong> EH46S.<br />
*approved applications only.<br />
Certificate No. MD00/1206/0015/1 Expiry date: 01/05/2013<br />
POSCO SPECIALITY STEEL CO., LTD. Changwon<br />
65, Shinchon-dong<br />
Changwon<br />
Kyungnam<br />
641-370<br />
Steelmaking<br />
Semi-Finished<br />
Tel: +82 (0)55 269 6727 Fax: +82 (0)55 269 6907 Email:mailto:soonpark@poscoss.com<br />
http://www.poscoss.com<br />
Certificate No. MD00/1294/009/1 Expiry date: 09/08/2011<br />
S & STEEL CO., LTD. Busan Port<br />
Bars<br />
Plates from coils<br />
Page<br />
E.A.F. / Ingot<br />
Ingots<br />
Structural<br />
Machinery<br />
Normal Strength<br />
Higher Strength<br />
52<br />
As Below<br />
A, B, D, E 100<br />
AH46S*, DH46S*, EH46S* 80<br />
FH27S, FH32, FH36 83<br />
AH40, DH40, EH40 90<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
100<br />
360AR, 410AR 40<br />
460FG, 490FG, 510FG 90<br />
360FG, 410FG 100<br />
LTAH27S, LTAH32, LTAH36, LTDH27S,<br />
LTDH32, LTDH36, LTEH27S, LTEH32, LTEH36,<br />
LTFH27S, LTFH32, LTFH36<br />
50<br />
304L, 304LN, 316L, 316LN 80<br />
UNS S31803, UNS 32900*, UNS 32205* 50<br />
E 12<br />
A, B, D 22<br />
EH27S, EH32, EH36 16<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 22<br />
460FG, 490FG, 510FG 12<br />
360FG, 410FG 22<br />
304L, 316L 8<br />
As below<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless<br />
150<br />
carbon, carbon-manganese, alloy 150<br />
austenitic stainless 170<br />
carbon, carbon-manganese, alloy 150<br />
A 18<br />
AH27S, AH32 15<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
1620 Dadae-dong, Saha-gu<br />
Busan<br />
Tel: +82 51 262 7525 Fax: +82 51 924 7902<br />
Email: sadrain888@hanmail.net<br />
Web: http://www.sdstl.co.kr<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Certificate No. MD00/3523/0004/1 Expiry date: 25/09/2014<br />
SPP YULCHON ENERGY CO., LTD. Mokpo Steelmaking<br />
E.A.F. / Ingot<br />
As below<br />
Semi-Finished Ingots<br />
carbon, carbon-manganese, alloy 50<br />
Block 8, Yulchon Industrial Complex l, Sinseong-ri<br />
Haeryong-myeon, Suncheon City, Jeollanam-do<br />
Zip code: 540856<br />
Tel: +82 61 760 7100 Fax: +82 61 725 7733 Email: kimlh@spp.co.kr Web: http://www.sppycenergy.co.kr<br />
Ingots as semi finished products are approved for further processing for forgings, nominal maximum dimensions 1630/1850mm diameter x 2850mm long, to the<br />
above maximum weight.<br />
Certificate Number: MD00/3866/0001/1 Expiry date: 21/02/2015<br />
SeAH BESTEEL CORPORATION Mokpo<br />
Gunsan Plant<br />
1-6, Soryong-Dong<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
E.A.F./Ingot/Con Cast<br />
Ingots<br />
Blooms<br />
Billets<br />
Machinery<br />
Chain Cable Stock<br />
As below<br />
alloy 109<br />
carbon, carbon-manganese 155<br />
carbon, carbon-manganese, alloy 510<br />
carbon, carbon-manganese 180<br />
carbon, carbon-manganese, alloy 300<br />
R5 140<br />
R4S, R4S 146<br />
R4 155<br />
U1, U2, U3, R3, R3S 165<br />
Gunsan City<br />
Jeonlabuk-Do<br />
Tel: +82 63 460 8222 Fax: +82 63 460 8099<br />
Email: mailto:ssc0105@seahbesteel.co.kr<br />
Web:http://www.egs.seah.co.kr<br />
Approval for Chain Cable Stock Grades R3, R3S, R4, R4S <strong>and</strong> R5 is restricted to supply to DAI HAN ANCHOR CHAIN MFG CO. LTD <strong>and</strong> Grades R3, R3S<br />
<strong>and</strong> R4 to Pu Sung Metal Co., Ltd.<br />
Semi Finished Products - Ingots, Carbon & Carbon-manganese nominal sizes 2100 / 2350mm diameter x 2800mm long, <strong>and</strong> Alloy nominal sizes 2350 / 2600mm<br />
diameter x 3050mm long, to the above maximum weight approved for further processing for forgings.<br />
Semi Finished Products - Blooms to nominal 390mm width x 5400mm length, to above maximum thickness approved for further processing for Forgings <strong>and</strong><br />
Rolled Products.<br />
Semi Finished Products - Billets to nominal 180 width x 11500mm length, to above maximum thickness approved for further processing for Rolled Products<br />
Certificate No. MD00/1749/0012/1 Expiry date: 04/04/2015<br />
YK STEEL CORP. Busan Port<br />
90 Gupyung-Dong<br />
Saha-Gu<br />
604-817<br />
Busan<br />
Steelmaking<br />
Sections<br />
Bars<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Normal Strength<br />
Tel. +82 (0)51 260 2457 Fax +82 (0)51 265 2430 Email:mailto:jakim@yksteel.co.kr Web: http://www.yksteel.co.kr<br />
Certificate No. MD00/0650/0007/1 Expiry date: 26/05/2014<br />
Luxembourg<br />
ARCELORMITTAL BELVAL ET DIFFERDANGE Lyon<br />
BELVAL MILL<br />
TMB Rolling Plant<br />
Esch-Belval Mill<br />
66 rue de Luxembourg<br />
L4009 Esch sur Alzette<br />
Tel: +352 58 2885 Fax: +352 5835 81 Contact: Mr Muller<br />
Email: mailto:roberto.klecker@arcelor.com<br />
Certificate #: MD00/0030/0006/1 Expiry date: 06/11/2012<br />
ARCELORMITTAL BELVAL ET DIFFERDANGE Lyon<br />
Differdange Mill<br />
66 rue de Luxembourg<br />
L 4009 Esch sur Alzette<br />
Steelmaking<br />
Sections<br />
Steelmaking<br />
Sections<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
E.A.F./Ingot/Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Tel: +352 58 2028 84 Fax: +352 5835 81 Email: mailto:julien.bettendorff@arcelor.com Web http://www.arcelor.com<br />
Certificate No. MD00/0032/0006/1 Expiry date: 12/03/2013<br />
Page<br />
53<br />
As below<br />
A 7<br />
A 32<br />
As below<br />
A, B 26<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 26<br />
EH27S, EH32, EH36<br />
As below<br />
A, B 40<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 40<br />
EH27S, EH32, EH36<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
ARCELORMITTAL RODANGE ET SCHIFFLANGE Lyon<br />
Sections<br />
Normal Strength<br />
A, B, D 30<br />
Rodange Mill<br />
2, Rue de L'industrie<br />
L-4801 Rodange<br />
Higher Strength<br />
AH36, DH36 30<br />
Tel: +352 5019 2655 Fax: +352 5019 2217 Email: mailto:stephane.arnault@areclormittal.com Web http://www.ares.lu<br />
Certificate No. MD00/2266/0005/1 Expiry date: 18/01/2013<br />
TLM (Train Laminé March<strong>and</strong>) Lyon<br />
Boulevard Aloyse Meyer<br />
L-4241 Esch Sur Alzette<br />
Sections<br />
Bars<br />
Tel: +352 57 129 3331 Fax: +352 57 129 2126 Email: mailto:m.tonon@lme.fr<br />
Certificate No. MD00/2265/0005/1 Expiry date: 17/10/2013<br />
Macedonia<br />
FAKOM A.D. Beograd<br />
St. Aleks<strong>and</strong>ar Makedonski No.5<br />
POB 439<br />
1000 SKOPJE<br />
Tel No.: +389 317 4023, Fax: +389 317 3564<br />
email: mailto:info@fakom.com.mk<br />
Web http://www.fakom.com.mk<br />
Certificate No. MD00/2856/0005/1 Expiry date: 22/11/2013<br />
MAKSTIL A.D.- SKOPJE Beograd<br />
Fabricated Sections<br />
Steelmaking<br />
Plates<br />
Normal Strength<br />
Normal Strength<br />
Normal Strength<br />
Higher Strength<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
XVI Makedonska brigada 18<br />
P.O. Box 599<br />
100-Skopje<br />
Tel: +389 2 328 7024 Fax: +389 2 3175 982 Email mailto:kocovski@makstil.com Web http://www.makstil.com<br />
Specified through thickness properties for plates up to 50 mm thickness<br />
Certificate No. MD00/2216/0006/1 Expiry date: 23/05/2013<br />
Malaysia<br />
JI KANG DIMENSI Sdn. Bhd. Kuala Lumpur<br />
Lot 69-71, Kawasan Perindustrian Gebeng<br />
26080 Kuantan<br />
Pahang Darul Makmur<br />
Tel: +609 583 9881 Fax: +609 583 4551<br />
Email: mailto: ji_liw@163.com<br />
Web: www.jikangdimensi.com<br />
Certificate No. MD00/3022/0004/1 Expiry date: 28/06/2015<br />
MEGASTEEL SDN. BHD. Kuala Lumpur<br />
Lot 2319, Kawasan Perindustrian Olak Lempit<br />
Mukim Tanjung Dua Belas<br />
42700 Banting<br />
Selangor Darul Ehsan<br />
Plates<br />
Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
Normal Strength<br />
E.A.F. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Tel: +60 (0)3 3182 2000 Fax: +60 (0)3 3182 2278 Email mailto:choomj@megasteel.com.my Web http://www.lion.com.my<br />
Certificate No. MD00/2803/0005/1 Expiry date: 05/06/2013<br />
Page<br />
54<br />
A 40<br />
A 40<br />
A 35<br />
AH36 40<br />
As below<br />
A, B, D 100<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 50<br />
360AR, 410AR, 460AR 40<br />
360, 410, 460, 490, 460FG, 490FG, 510FG 50<br />
360FG, 410FG 100<br />
A 30<br />
As below<br />
carbon, carbon-manganese 70<br />
A, B, D, E 16<br />
AH27S, AH36, DH27S, DH32, DH36, EH27S,<br />
EH32, EH36<br />
12<br />
460FG, 490FG, 510FG 12<br />
360FG, 410FG 16<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Mexico<br />
ARCELORMITTAL LAZARO CARDENAS, S.A. de<br />
C.V.<br />
Av Francisco J. Mujica N° 1-B<br />
60950- Lázaro Cárdenas<br />
Michoacan<br />
Metepec/Veracr Steelmaking<br />
uz<br />
Semi-Finished<br />
E.A.F. / Con Cast<br />
Slabs<br />
carbon, carbon-manganese<br />
carbon, carbon-manganese 250<br />
Steel types carbon <strong>and</strong> carbon-manganese cover the supply <strong>of</strong> blooms for processing into normal strength, high strength <strong>and</strong> ferritic steels for low temperature<br />
service according to the Society's Rules for the Manufacture, Testing <strong>and</strong> Certification <strong>of</strong> Materials, Chapter 3. The final processing mill is responsible for<br />
ordering steel which complies with their approved chemical composition <strong>and</strong> enables them to achieve the required mechanical properties<br />
Tel: +52 753 533 1871 Fax: +52 753 533 1187<br />
Email:carmen.aparaicio@arcelormittalsteel.com<br />
Web http://www.arcelormittalsteel.com<br />
Certificate No. MD00/0783/0006/1 Expiry date: 09/01/2014<br />
Netherl<strong>and</strong>s<br />
NEDSTAAL B.V. Rotterdam<br />
Marine<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Ingot<br />
Ingots<br />
Slabs<br />
Blooms<br />
Rapenburg 1<br />
P.O. Box 210<br />
2950 AE Alblasserdam<br />
Tel: +33 (0)78 692 3715 Fax: +31 (0)78 692 3712 Email mailto:anton.rombout@nedstaal.nl Web http://www.nedstaal.nl<br />
Certificate No. MD00/3010/0003/1 Expiry date: 12/09/2012<br />
TATA STEEL IJMUIDEN B.V Amsterdam<br />
IJmuiden Works<br />
Postbus 10000<br />
1970 CA IJmuiden<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Hot Rolled Coil<br />
Tel +31 2514 92110 Fax +31 2514 70414 Email: mailtojelle.van-der-wal@tatasteel.com<br />
web: www.tatasteel.nl<br />
Certificate No. MD00/0698/0008/1 Expiry date: 29/09/2015<br />
Norway<br />
CELSA ARMERINGSSTÅL AS Oslo<br />
Mo Industripark<br />
PO Box 500<br />
N-8601 Mo i Rana<br />
Steelmaking<br />
Semi-Finished<br />
Billets<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Normal Strength<br />
E.A.F. / Con Cast<br />
Tel: +47 7513 6500 Fax: +47 7513 6845 Email: mailto:halvard.meisfjord@celsanordic.com Web http://www.celsanordic.com<br />
Certificate No. MD00/2103/0005/1 Expiry date: 07/09/2014<br />
Page<br />
Billets<br />
55<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 11<br />
carbon, carbon-manganese, alloy 320<br />
carbon, carbon-manganese, alloy 400<br />
carbon, carbon-manganese, alloy 125<br />
As below<br />
carbon, carbon-manganese 225<br />
A, B 20<br />
A, B 20<br />
carbon, carbon-manganese<br />
A, carbon, carbon-manganese 160<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Peru<br />
EMPRESA SIDERURGICA DEL PERU S.A.A. Callao<br />
Av. Santiago Antunez de Mayolo s/n<br />
Chimbote<br />
Steelmaking<br />
Plates<br />
Hot Rolled Coil<br />
B.O.S. / Ingot<br />
E.A.F. / Ingot<br />
Normal Strength<br />
Normal Strength<br />
Tel +51 43 883000 Fax +51 43 324580 Email: mailto:rrossel@sider.com.pe Web: http://www.sider.com.pe<br />
Certificate No. MD00/0461/0005/1 Expiry date: 11/04/2012<br />
Pol<strong>and</strong><br />
''HUTA POKÓJ'' S.A. Katowice Plates<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
ul. Niedurnego 79<br />
41-709 Ruda Slaska<br />
Sections<br />
Normal Strength<br />
Tel +48 32 772 1523 Fax +48 32 772 4856 Email: dkj@hutapokoj.com.pl Web: http://www.hutapokoj.com.pl<br />
Certificate No. MD00/0723/0007/1 Expiry date: 10/12/2012<br />
''INTERSPEED'' Katowice<br />
PRZEDSIEBIORSTWO HANDLOWO USLUGOWO<br />
PRODUKCYJNE Sp z.o.o<br />
Sections<br />
Normal Strength<br />
Higher Strength<br />
As below<br />
As below<br />
A 32<br />
A 10<br />
A, B, D, E 25<br />
360AR, 410AR, 360, 410, 360FG, 410FG 25<br />
A, B, D, E 25<br />
A, B, D, E 40<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36, FH27S<br />
40<br />
Aleja Solidarnosci 1<br />
27-400 Ostrowiec Swietokrzyski<br />
Tel: +48 (0)41 266 0700; +48 695 385 015 Fax: +48 (0)41 266 0701 Email: mailto:interspeed@interspeed.com.pl Web page http://www.interspeed.com.pl<br />
Certificate No. MD00/2007/0006/1 Expiry date: 25/07/2014<br />
ARCELORMITTAL POLAND S.A. Katowice<br />
ODDZIAL W KRAKOWIE<br />
ul. Ujastek 1<br />
Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
Plates from coils<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
Boiler <strong>and</strong> Pressure Vessel<br />
As below<br />
carbon, carbon-manganese 220<br />
A, B, D 15<br />
AH27S, AH32 16<br />
A, B, D 15<br />
AH27S, AH32 16<br />
410 FG, 360 FG, 460 FG 16<br />
30-969 Kraków<br />
Tel: +48 12 293 2104 Fax: +48 12 293 2145 email: malgorzata.razny@arcelormittal.com Web: http://www.arcelormittal.com/pol<strong>and</strong>/<br />
Slabs as semi finished products are approved for further processing for rolled products to the maximum thickness shown above <strong>and</strong> nominal 1580mm width<br />
<strong>and</strong> 11000mm length.<br />
Coils <strong>and</strong> plates are approved to maximum 2100mm width.<br />
Certificate #: MD00/0707/0010/1 Expiry date: 27/01/2014<br />
ARCELORMITTAL POLAND S.A. Katowice<br />
Oddzial w Dabrowie Gorniczej<br />
Al. J. Pilsudskiego 92<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
B.O.S. / Con Cast<br />
Slabs<br />
Blooms/Billets<br />
Normal Strength<br />
41-308 Dabrowa Gornicza<br />
Tel: +48 32 776 87 14 Fax: +48 32 776 84 86 Email wojciech.michalczyk@arcelormittal.com Web: http://www.arcelormitta.com/pol<strong>and</strong>/<br />
<strong>Approved</strong> for ingots, <strong>and</strong> continuously cast products for re- rolling in all the normal <strong>and</strong> higher tensile strength grades.<br />
Certificate No. MD00/0717/0010/1 Expiry date: 06/02/2015<br />
ARCELORMITTAL WARSZAWA Sp. z.o.o. Katowice<br />
ul. Kasprowicza 132<br />
01-949 Warszawa<br />
Tel: +48 22 835 8081 Fax: +48 22 835 8638<br />
Email: mailto:beata.pietrzyk@arcelormittal.com<br />
Web: http://www.arcelormittal-warszawa.com<br />
Certificate No. MD00/0720/0007/1 Expiry date: 02/08/2015<br />
CELSA "HUTA OSTROWIEC" Sp. z o.o. Katowice<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Steelmaking<br />
Semi-Finished<br />
Page<br />
E.A.F./Ingot/Con Cast<br />
Ingots<br />
Blooms/Billets<br />
Structural<br />
Machinery<br />
E.A.F. / Ingot<br />
Ingots<br />
56<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese 300<br />
carbon, carbon-manganese, Alloy 280<br />
B, D, E 15<br />
A 20<br />
As below<br />
carbon, carbon-manganese, alloy 25<br />
carbon, carbon-manganese, alloy 220<br />
carbon, carbon-manganese, alloy 65<br />
carbon, carbon-manganese, alloy 65<br />
As below<br />
carbon, carbon-manganese, alloy 130<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
ZAKLAD WYROBOW KUTYCH<br />
ul. Samsonowicza 2<br />
27-400 Ostrowiec Swietokrzyski<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Tel: +48 (0)41 2492390 Fax: +48 (0)41 2493779<br />
EMail:mdunaj@celsaho.com<br />
Web page http://www.celsaho.com<br />
Certificate No. MD00/2006/0006/1 Expiry date: 26/10/2013<br />
Ingots size maximum 130 MT 2.33 m diameter<br />
CELSA "HUTA OSTROWIEC" Sp. z o.o. Katowice<br />
ZAKLAD WYROBOW WALCOWANYCH<br />
Tel: +48 (0) 41 2493269 Fax: +48 (0)41 2492037<br />
EMail :zsobon@celsaho.com<br />
Web page:www.celsaho.com<br />
Certificate #: MD00/3444/0002/1 Expiry date: 26/10/2013<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Con Cast<br />
Billets<br />
CMC ZAWIERCIE S.A. Katowice Steelmaking<br />
E.A.F. / Con Cast<br />
ul. Pilsudskiego 82<br />
42-400 Zawiercie<br />
Semi-Finished Blooms/Billets<br />
Tel: +48 32 672 57 55 Fax: +48 32 672 57 59 Email: anna.wieczorek@cmc.com Web: www.cmcpol<strong>and</strong>.com<br />
Certificate No. MD00/3594/0003/1 Expiry date: 06/05/2015<br />
Includes billets/blooms up to 185 x 160mm.<br />
As below<br />
carbon, carbon-manganese, alloy 160<br />
As below<br />
carbon, carbon manganese 160<br />
FERROSTAL LABEDY Sp. z o.o. Katowice Steelmaking<br />
E.A.F. / Con Cast<br />
As below<br />
Semi-Finished Billets<br />
carbon, carbon-manganese, alloy 160<br />
Bars<br />
carbon, carbon-manganese, alloy 170<br />
ul. Zawadzkiego 47<br />
44-109 Gliwice<br />
Tel: +48 32 234 7600 Fax: +48 32 234 7650 EMail mailto:biuro@ferrostal.com.pl Web page http://www.ferrostal.com.pl<br />
The semi finished products above are approved for use for further processing for the finished products defined above.<br />
Certificate No. MD00/2307/0005/1 Expiry date: 31/03/2014<br />
GONAR-BIS Sp. z.o.o. Katowice<br />
Wydzial Stalownia Baildon<br />
ul . Zelazna 5<br />
Steelmaking<br />
E.A.F./Ingot/Con Cast<br />
40-851 Katowice<br />
Tel: +48 32 359 7860/0810 Fax: +48 32 359 7092 Email: stalownia@gonar.com.pl Web: www.stalownia.gonar.com.pl<br />
Certificate No. MD00/3580/0001/1 Expiry date: 06/04/2012<br />
carbon, carbon-manganese, alloy<br />
HSW - HUTA STALI JAKOSCIOWYCH SA Katowice Steelmaking<br />
E.A.F./Ingot/Con Cast As below<br />
Semi-Finished Ingots<br />
carbon, carbon-manganese, alloy 15<br />
Rolled Billets<br />
Carbon, Carbon-Manganese, Alloy 130<br />
Blooms/Billets<br />
carbon, carbon manganese, Alloy 270<br />
Rolled Bars<br />
Carbon, Carbon manganese, Alloy 120<br />
Bars<br />
Normal Strength<br />
A, B, D, E 120<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
120<br />
Structural<br />
carbon, carbon-manganese, alloy 120<br />
Machinery<br />
carbon, carbon-manganese, alloy 120<br />
Chain Cable Stock<br />
U1, U2, U3 110<br />
ul. Kwiatkowskiego 1<br />
37-450 Stalowa Wola<br />
Tel: +48 15 813 53 20 Fax: +48 15 872 21 55 Email: mailto:h<strong>and</strong>lowy@hsw-hsj.com.pl Web: http://www.hsw-hsj.com.pl<br />
Certificate No. MD00/2406/0006/1 Expiry date: 23/05/2014<br />
HUTA BANKOWA Sp. z o.o. Katowice Sections<br />
Normal Strength<br />
A, B 20<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 20<br />
Bars<br />
Normal Strength<br />
A 250<br />
Structural<br />
carbon, carbon-manganese 250<br />
Machinery<br />
carbon, carbon-manganese, alloy 250<br />
ul. Sobieskiego 24<br />
41-300 Dabrowa Górnicza<br />
Chain Cable Stock<br />
U1, U2 160<br />
Tel +48 32 295 7430 Fax +48 32 262 3788 Email: z.hajduk@hutabankowa.pl; .grzesiak@hutabankowa.pl Web http://www.hutabankowa.com.pl<br />
Certificate No. MD00/0716/0007/1 Expiry date: 05/03/2013<br />
HUTA BATORY Sp. z o.o. Katowice<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Ingot<br />
Ingots<br />
ul.Dyrekcyjna 6<br />
41-506 Chorzów<br />
Tel: +48 32 77 22 155 Fax:+48 32 77 22 400 Email:mailto:dkj.hutabatory@op.pl Web: http://www.hutabatory.com.pl<br />
Certificate No. MD00/0711/0009/1 Expiry date: 07/10/2013<br />
HW PIETRZAK HOLDING Sp. z o.o. Katowice<br />
Plates<br />
Page<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Clad<br />
57<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless<br />
A, B, D, E 100<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
100<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 100<br />
A/304L 50<br />
14<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Oddzial Walcownia Blach Batory w Chorzowie<br />
ul. Lesna 42<br />
41-506 Chorzów<br />
Tel: +48 32 728 981 616 Fax: +48 32 77 22 117<br />
Email mailto:beata.brzoza-kwiatek@p-h.pl<br />
Web http://www.pietrzak-holding.pl<br />
All plates with specified through thickness properties<br />
Certificate No. MD00/2766/0006/1 Expiry date: 18/10/2013<br />
ISD HUTA CZESTOCHOWA Sp. z o.o. Katowice<br />
ul. Kucelinska 22<br />
42-207 Czestochowa<br />
Tel: +48 34 323 8147 Fax: +48 34 323 0034<br />
Email: maito:marketing@isd-hcz.com.pl<br />
Web: http://www.isd- hcz.com.pl<br />
Certificate No. MD00/0713/0010/1 Expiry date: 06/04/2015<br />
WALCOWNIE BRUZDOWE "BATORY" Sp. z.o.o. Katowice<br />
ul. Zelazna 22<br />
41-500 Chorzów<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Bars<br />
E.A.F. / Con Cast<br />
Slabs<br />
Blooms<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Structural<br />
Machinery<br />
Tel: +48 32 772 2698 Fax: +48 32 772 2250 Email:sowinska.lilianna@wbb.net.pl Web:http://www.wbb.net.pl<br />
Certificate No. MD00/3545/0002/1 Expiry date: 01/12/2014<br />
Romania<br />
ARCELORMITTAL GALATI S.A. Galatz<br />
Sos Smardan Nr.1<br />
800698 Galati<br />
Steelmaking<br />
Plates<br />
B.O.S./Ingot/Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
As below<br />
carbon, carbon-manganese 250<br />
carbon, carbon-manganese 280<br />
A, B, D, E 50<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
50<br />
360AR, 410AR, 460AR, 360FG, 410FG, 460FG,<br />
490FG, 510FG<br />
50<br />
carbon, carbon-manganese, alloy 150<br />
carbon, carbon-manganese, alloy 150<br />
As below<br />
A, B, D, E 100<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
100<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 100<br />
Tel: +40 236 802100 Fax: +40 236 802101 Email: mailto:mariana.subtirica@arcelormittal.com Web page http://www.arcelormittal.com<br />
Approval includes for plates with specified through thickness properties, designation Z25, in all grades up to 60 mm thickness in the normalized condition.<br />
Certificate No. MD00/0333/0007/1 Expiry date: 04/12/2013<br />
DOOSAN IMGB S.A<br />
Berceni Road Nr. 104<br />
Sector 4<br />
041919 Bucharest<br />
Galatz Steelmaking<br />
Semi-Finished<br />
Tel: +40 21 301 2549 Fax: +40 21 301 2502 Email: mailto:ion.diaconu@kvaerner.ro<br />
Certificate No. MD00/1259/0001/1 Expiry date: 10/09/2014<br />
MECHEL TARGOVISTE S.A. Galatz<br />
Targoviste<br />
Sos. Gaiesti, 9-11<br />
Jud Dambovita, 130087<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
E.A.F. / Ingot<br />
Ingots<br />
E.A.F. / Con Cast<br />
Blooms/Billets<br />
Chain Cable Stock<br />
Tel: +40 245 632907 Fax: +40 245 213322 Email: mailto:dumitru@cost.ro Web: http://www.mechel.com<br />
Certificate No. MD00/2293/0005/1 Expiry date: 14/02/2014<br />
S.C. FORTUS S.A. Galatz<br />
Bd. Poitiers Nr. 10<br />
700671 IASI<br />
Tel: +40 232 222023 Fax: +40 232 220370<br />
Email: mailto: <strong>of</strong>fice@fortus-iasi.ro<br />
Web: http://www.fortus-iasi.ro<br />
Certificate No. MD00/1258/0003/1 Expiry date: 12/04/2014<br />
S.C. LAMINORUL S.A. - BRAILA Galatz<br />
Sos. Industria Sarmei nr. 2<br />
810461 Braila<br />
Steelmaking<br />
Sections<br />
E.A.F. / Ingot<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Tel +40 239 68 5597 Fax +40 239 66 9387 Email: mailto:iulian.vasilescu@laminorul.ro Web http://www.laminorul.ro<br />
Certificate No. MD00/1916/0007/1 Expiry date: 30/03/2015<br />
Bars<br />
Page<br />
58<br />
carbon, carbon-manganese, alloy 250<br />
carbon, carbon-manganese, alloy 250<br />
As below<br />
carbon, carbon manganese, Alloy 150<br />
U1, U2, U3 95<br />
carbon, carbon-manganese 120<br />
A 50<br />
AH27S, AH32, AH36 12<br />
A 50<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
S.C. SILCOTUB S.A. Galatz Steelmaking<br />
E.A.F. / Con Cast<br />
As below<br />
Semi-Finished Blooms/Billets<br />
carbon, carbon-manganese, alloy 260<br />
TENARIS GROUP<br />
Steel Shop Calarasi<br />
Prelungirea Bucurestiului Str. No.162<br />
910125<br />
Calarasi<br />
Tel +40 242306 600 Fax No.<br />
Web Address www.tenaris.com<br />
Certificate No. MD00/3997/0001/1 Expiry date: 27/02/2015<br />
SC DUCTIL STEEL SA Galatz<br />
Punct de lucru Otelu-Rosu<br />
str. Mihai Eminescu, No 10,<br />
cod 325700,loc Otelu Rosu<br />
jud.Caras Severin<br />
Tel No: +40 (0)255 532 239 Fax: +40 (0) 255 532 054<br />
Email: maria.dutu@mechel.com<br />
Web www.ductilsteel.ro<br />
Certificate No: MD00/ 3888/ 0001/ 1 Expiry Date 10/03/2014<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Con Cast<br />
Billets<br />
SC TMK-RESITA S.A. Galatz Steelmaking<br />
E.A.F. / Con Cast<br />
Traian Lalescu No. 36<br />
Caras-Severin<br />
Semi-Finished Billets<br />
Tel: +40 (0)255 217211 Fax: +40 (0)255 211883 Email: mailto: <strong>of</strong>fice.resita.tmk-artrom.ro<br />
Web http://www.tmk-artrom.ro<br />
Certificate No. MD00/3804/0001/1 Expiry date: 08/07/2013<br />
Russia<br />
"RM - rolling complex" St. Petersburg<br />
St. Petersburg branch "RM - steel" Ltd.<br />
11, Sedova street<br />
192019, St Petersburg<br />
Sections<br />
Normal Strength<br />
Higher Strength<br />
Tel: +7 812 318 0015 Fax: +7 812 568 0015 Email: mailto:l.gorohova@rm-steel.com Web http//www.rm-steel.com<br />
Certificate No. MD00/1910/0008/1 Expiry date: 16/01/2014<br />
CHELYABINSK METALLURGICAL PLANT OAO St. Petersburg<br />
454047- Chelyabinsk<br />
2-d Paveletskaya ul, 14<br />
Steelmaking<br />
Semi-Finished<br />
Tel; +7 351 725 30 24 Fax: +7 351 722 86 29 Email mailto:sale@mechel.ru<br />
Ingots supllied as semi finished products are for further processing for forgings.<br />
Certificate No. MD00/3262/0004/1 Expiry date: 11/08/2015<br />
J.S.C. SEVERSTAL St. Petersburg<br />
Rolling Mill 2800<br />
30 Mira Str<br />
162 699 Cherepovets<br />
Vologoda Region<br />
Plates<br />
E.A.F. / Ingot<br />
Ingots<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Tel: +7 8202 531146 Fax: +7 8202 53 2424 EMail: mailto:sales@stal.ru Web http://www.severstal.ru<br />
Plates in the As Rolled, Normalized, Quenched <strong>and</strong> Tempered conditions with specified through thickness properties.<br />
Plates in the Normalizing rolled condition to 2200mm maximum width.<br />
Certificate #: MD00/0298/00076/1 Expiry date : 14/06/2013<br />
J.S.C. SEVERSTAL St. Petersburg<br />
Rolling Mill 2000<br />
162699 Cherepovets<br />
Plates<br />
Hot Rolled Coil<br />
Normal Strength<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Tel: +7 8202 53 1146 Fax: +7 8202 53 2424 EMail: mailto:sales@stal.ru Web http://www.severstal.ru<br />
Certificate No. MD00/2801/0006/1 Expiry date: 14/06/2013<br />
J.S.C. SEVERSTAL St. Petersburg<br />
Plates<br />
Page<br />
Normal Strength<br />
Higher Strength<br />
59<br />
carbon, carbon-manganese<br />
carbon, carbon-manganese 100<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 177<br />
A, B, D 14<br />
AH27S, AH32, AH36, AH40, DH27S, DH32,<br />
DH36, DH40, EH27S, EH32, EH36<br />
14<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 20<br />
A, B, D, E 40<br />
EH27S, EH32 32<br />
AH27S, AH32, AH36, AH40, DH27S, DH32,<br />
DH36, DH40, EH40<br />
40<br />
360, 410 32<br />
360FG, 410FG, 460FG, 490FG, 510FG 40<br />
A 15<br />
A, B, D, E 12<br />
AH27S, AH32, AH36, AH40, DH27S, DH32, 12<br />
DH36, DH40, EH27S, EH32, EH36, EH40<br />
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 12<br />
D, E 50<br />
A, B 70<br />
AH27S, AH32, AH36, AH40, DH27S, DH32,<br />
DH36, DH40, EH27S, EH32, EH36, EH40<br />
70<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Rolling Mill 5000<br />
Kolpino<br />
Saint Petersburg<br />
Tel: +7 8202 561146 Fax: +7 8202 53 2424 EMail: mailto:sales@stal.ru Web http://severstal.ru<br />
Plates with specified through thickness properties<br />
Certificate #: MD00/2802/0005/1 Expiry date: 14/06/2013<br />
J.S.C. SEVERSTAL St. Petersburg Steelmaking<br />
B.O.S. / Con Cast<br />
E.A.F. / Con Cast<br />
B.O.S <strong>and</strong> E.A.F Workshops<br />
Semi-Finished Slabs<br />
Tel: +7 8202 561146 Fax: +7 8202 53 2424 EMail: mailto:sales@stal.ru Web http://severstal.ru<br />
Certificate #: MD00/3821/0001/1 Expiry date: 14/06/2013<br />
JOINT STOCK COMPANY«EVRAZ NIZHNY TAGIL St. Petersburg<br />
METALLURGICAL PLANT»<br />
1, Metallurgov Str.,<br />
Nizhny Tagil,<br />
Sverdlovsk Region, 622025<br />
Steelmaking<br />
Semi-Finished<br />
Tel:+007 3435 490611 Fax:+007 3435 496169 Email:mailto:alex<strong>and</strong>er.ashihin@ur.evraz.com<br />
Web http://www.ntmk.ru<br />
Certificate No. MD00/2660/0006/1 Expiry date: 05/04/2015<br />
JSC AMURMETAL St. Petersburg<br />
30, Vagonnaya Str<br />
681000 Komsomolsk-on-Amure<br />
Tel No. 007 4217 52 9333 Fax No. 007 4217 52 9333<br />
Email: market@amurmetal.ru<br />
Web: www.amurmetal.ru<br />
Certificate No. MD00/3588/0002/1 Expiry: 10/03/2015<br />
JSC EVRAZ CONSOLIDATED St. Petersburg<br />
WEST SIBERIAN METALLURGICAL PLANT<br />
654043 Kosmicheskoye shosse,<br />
16, Novokuznetsk<br />
Tel No. 007 3843 59 5900 Fax 007 3843 59 4343<br />
Email zsmk@zsmk.ru<br />
Web address xxxxxxxxxxxxxxx<br />
Certificate No. MD00/3723/0002/1 Expiry Date 21/12/2012<br />
JSC KIROVSKIY ZAVOD St. Petersburg<br />
Petrostal Steel Works<br />
47 Stachek Prospect<br />
198097 St. Petersburg<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Bars<br />
B.O.S. / Con Cast<br />
Slabs<br />
E.A.F. / Con Cast<br />
Slabs<br />
Billets<br />
B.O.S. / Con Cast<br />
Slabs<br />
O H / Ingot<br />
Semi-finished Products<br />
Tel: +7 812 783 6813 Fax: +7 812 783 6504 Email mailto:sergey.barmashev@petrostal.kzgrou.ru Web: http://www.petrostal.spb.ru<br />
Certificate No. MD00/1751/0006/1 Expiry: 30/01/2015<br />
OJSC "Magnitogorsk Iron & Steel Works" St. Petersburg<br />
Steel Making <strong>and</strong> Central Laboratory<br />
93, Kirova Street<br />
455002 Magnitogorsk<br />
Steelmaking<br />
Semi-Finished<br />
B.O.S. / Con Cast<br />
Tel +7 351 924 7929 Fax +7 351 924 9290 Emial: seller@mmk.ru Web http://www.mmk.ru<br />
Approval covers for slabs as detailed above to nominal width 2520mm <strong>and</strong> nominal length 7000mm for further processing for rolled products.<br />
Certificate No. MD00/3103/0003/1 Expiry date: 27/08/2013<br />
OJSC "Magnitogorsk Iron & Steel Works"<br />
Rolling Mill 2000<br />
St. Petersburg Hot Rolled Coil Normal Strength<br />
Boiler & Pressure Vessel<br />
Tel +7 351 924 7929 Fax +7 351 924 9290 Emial: seller@mmk.ru Web http://www.mmk.ru<br />
Certificate No. MD00/3834/0001/1 Expiry date: 27/08/2013<br />
OJSC "Magnitogorsk Iron & Steel Works"<br />
Rolling Mill 2350<br />
St. Petersburg Plates<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
Tel +7 351 924 7929 Fax +7 351 924 9290 Emial: seller@mmk.ru Web http://www.mmk.ru<br />
Certificate No. MD00/3835/0001/1 Expiry date: 27/08/2013<br />
OJSC "Magnitogorsk Iron & Steel Works"<br />
Rolling Mill 2500<br />
St. Petersburg Hot Rolled Coil Normal Strength<br />
Boiler & Pressure Vessel<br />
Tel +7 351 924 7929 Fax +7 351 924 9290 Emial: seller@mmk.ru Web http://www.mmk.ru<br />
Certificate No. MD00/3836/0001/1 Expiry date: 27/08/2013<br />
Page<br />
Slabs<br />
60<br />
As below<br />
As below<br />
carbon, carbon-manganese 315<br />
carbon, carbon-manganese<br />
Normal strength, Higher Strength 300<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 200<br />
carbon, carbon-manganese, alloy 125<br />
As below 250<br />
A, B, D, E, AH32, AH36, DH32, DH36, EH32,<br />
EH36<br />
250<br />
As below<br />
carbon, carbon-manganese 120<br />
As below<br />
carbon, carbon-manganese 250<br />
A 10<br />
360AR, 410AR 10<br />
A 25<br />
360AR, 410AR 25<br />
A 10<br />
360AR, 410AR 10<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
OJSC "Magnitogorsk Iron & Steel Works" St. Petersburg Plates<br />
Normal Strength<br />
A 50<br />
Rolling Mill 4500<br />
Boiler & Pressure Vessel 360AR, 410AR 40<br />
Tel +7 351 924 7929 Fax +7 351 924 9290 Emial: seller@mmk.ru Web http://www.mmk.ru<br />
Approval covers for plates in the thickness range 30.0 to 50.0mm, to the maximum thickness shown above.<br />
Certificate No. MD00/3837/0001/1 Expiry date: 27/08/2013<br />
OJSK Novolipetsk Iron & Steel Corporation Moscow<br />
398040, Russia<br />
Pl. Metallurgov 2, NLMK<br />
Lipetsk<br />
Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Tel: +7 0742 444688 Fax: +7 0742 432541 Email:mailto:info@nmlk.ru Web:http://www.nlmk.ru Telex: 412630NLMK RU<br />
Certificate No. MD00/1124/0005/1 Expiry date: 06/11/2013<br />
OSKOL St. Petersburg<br />
ELECTROMETALLURGICAL KOMBINAT<br />
309515 Stary Oskol-15<br />
Steelmaking<br />
Semi-Finished<br />
Belgorod Region<br />
Tel +07 4725 375364 Fax +07 4725 373755 vformin@oemk.ru Web http://www.oemk.ru<br />
Certificate No. MD00/3065/0004/1 Expiry date: 26/02/2013<br />
URAL STEEL Open Joint-Stock Company St. Petersburg<br />
1, Zavodskaya Street<br />
Novotroitisk<br />
Orenburg Region<br />
462353<br />
Bars<br />
Steelmaking<br />
Plates<br />
E.A.F. / Con Cast<br />
Blooms<br />
Chain Cable Stock<br />
O H / Ingot<br />
E.A.F./Ingot/Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Tel: +7 3537 66 20 66 Fax: +7 3537 66 25 27 Email: mailto:d.bochkov@uralsteel.com Web: http://www.uralsteel.com<br />
Certificate No. MD00/2337/0007/1 Expiry date: 25/05/2014<br />
Serbia<br />
U.S. STEEL SERBIA d.o.o.<br />
Radinac<br />
11300 Smederevo<br />
Beograd Steelmaking<br />
Semi-Finished<br />
Hot Rolled Coil<br />
Plates from coils<br />
Tel: +381 26 224 429 Fax: +381 26 225 069 email: mailto:martintucek@usske.sk<br />
Certificate No. MD00/0360/0005/1 Expiry date: 17/03/2013<br />
Slovak Republic<br />
U.S. STEEL KOSICE, s.r.o. Prague<br />
Steelmaking<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Normal Strength<br />
B.O.S. / Con Cast<br />
Semi-Finished Ingots<br />
Plates<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
Hot Rolled Coil Normal Strength<br />
Boiler & Pressure Vessel<br />
Vstupny areal U.S. Steel<br />
044 54 Kosice<br />
Tel: +421 55 673 4731 Fax: +421 55 675 4731 Email: mailto:fkoca@sk.uss.com Web: http:www.usske.sk<br />
Certificate No. MD00/1649/0006/1 Expiry date: 18/06/2014<br />
As below<br />
As below 260<br />
A, B, D 16<br />
AH27S, AH32, AH36, AH40, DH27S, DH32,<br />
DH36, DH40, EH27S, EH36, EH40<br />
12<br />
460FG, 490FG 10<br />
360, 410, 360FG, 410FG 16<br />
carbon, carbon-manganese<br />
carbon, carbon-manganese 360<br />
U1, U2, U3 80<br />
As below<br />
As below<br />
B, D 40<br />
A 50<br />
AH32, AH36 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 40<br />
As below<br />
As below 200<br />
A, B, D 15<br />
A, B, D 15<br />
A, B, D, E, AH32, AH36, DH32, DH36, EH32,<br />
EH36<br />
carbon, carbon-manganese 220<br />
A, B 12<br />
360AR, 410AR 12<br />
A, B, D 12<br />
360, 410, 360FG, 410FG 12<br />
Semi-finished products in carbon <strong>and</strong> carbon-manganese steels in all normal strength grades <strong>and</strong> higher tensile strength grades up to EH36 with maximum<br />
dimensions 1540mm wide to 12000mm long <strong>and</strong> thickness as stated.<br />
Page<br />
61<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
ZELEZIARNE PODBREZOVA A.S. Prague Steelmaking<br />
B.O.S. / Con Cast<br />
As below<br />
Semi-Finished Blooms/Billets<br />
carbon, carbon manganese 280<br />
Kolkáreñ 35<br />
976 81 Podbrezova<br />
Tel: +421 48 645 4040 Fax: +421 48 645 4041 Email: mailto:turis@zelpo.sk Web: http://www.zelpo.sk<br />
Including eddy current testing in lieu <strong>of</strong> hydraulic testing.<br />
Certificate No. MD00/1464/0003/1 Expiry date: 05/12/2013<br />
Slovenia<br />
ACRONI, d.o.o. Zagreb<br />
Member <strong>of</strong> Slovenian Steel Group<br />
Cesta Borisa Kidrica 44<br />
SI - 4270 Jesenice<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
E.A.F. / Con Cast<br />
B.O.S/V.O.D./Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Austenitic Stainless<br />
Tel: +385 4 584 1040 Fax: +385 4 584 1068 Email: mailto:askube@acroni.si Web: http://www.acroni.si<br />
Certificate No. MD00/1391/0007/1 Expiry date: 26/10/2013<br />
METAL RAVNE d.o.o. Zagreb<br />
Koroška cesta 14<br />
2390 Ravne na Koroškem<br />
Steelmaking<br />
Sections<br />
Bars<br />
E.A.F. / Ingot<br />
Normal Strength<br />
Normal Strength<br />
Tel: +386 2 870 7200 Fax: +386 2 870 7219 Email: mailto:stanko.triglav@metalravne.com Web: http://www.metalravne.com<br />
Certificate No. MD00/2889/0004/1 Expiry date: 01/06/2014<br />
South Africa<br />
ARCELORMITTAL SOUTH AFRICA LTD. Johannesburg<br />
V<strong>and</strong>erbijlpark Steel<br />
Delfos Boulevard<br />
V<strong>and</strong>erbijlpark, 1911<br />
PO Box 2, V<strong>and</strong>erbijlpark 1900<br />
Tel +27 (0)16 889 2657 Fax +27 (0)16 889 5019<br />
Email: mailto:allen.pass@arcelormittal.com<br />
Web:http://www.arcelormittal.com<br />
Certificate No. MD00/1404/0008/1 Expiry date: 08/05/2014<br />
EVRAZ HIGHVELD STEEL & VANADIUM, Durban<br />
P.O. Box 111<br />
Witbank<br />
1035<br />
Mpumalanga<br />
Tel. +27 (0)13 690 9911/9623 Fax. +27 (0)13 690 9559<br />
EMail mailto:jacoline@highveld.co.za<br />
Web http://www.highveld.co.za<br />
Certificate No. MD00/0672/0005/1 Expiry date: 04/07/2013<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Steelmaking<br />
Plates<br />
Hot Rolled Coil<br />
Sections<br />
Bars<br />
Page<br />
B.O.S./E.A.F./Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Normal Strength<br />
62<br />
carbon, carbon-manganese<br />
austenitic stainless<br />
carbon, carbon-manganese, austenitic stainless 250<br />
A, B, D, E 40<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 40<br />
EH27S, EH32, EH36<br />
360AR, 410AR, 360, 410, 360FG, 410FG, 460FG, 40<br />
490FG, 510FG<br />
304L, 316L, 317L, 321, 347 70<br />
carbon, carbon-manganese, austenitic stainless<br />
A, B 20<br />
A, B 120<br />
As Below<br />
As below 240<br />
B, D, E 30<br />
A 50<br />
AH32, AH36, DH32, DH36, EH32, EH36, FH32, 30<br />
FH36<br />
360FG, 410FG, 460FG, 490FG, 510FG 30<br />
360AR, 410AR 40<br />
LTAH32, LTAH36, LTDH32, LTDH36, LTEH32, 30<br />
LTEH36, LTFH32, LTFH36<br />
As below<br />
A 50<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 40<br />
EH27S, EH32, EH36<br />
360AR, 410AR, 360FG, 410FG, 460FG, 490FG, 40<br />
510FG<br />
A 12<br />
360, 410 12<br />
A, B 50<br />
A, B 50<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Spain<br />
ACERALAVA S.A. Bilbao<br />
Poligono Industrial De Saratxo<br />
01470 Amurrio<br />
Alava<br />
Tel: +34 945 891461 Fax: +34 945 393001 email: carrieta@tubacex.es<br />
* accepted for approved applications.<br />
Approval also includes ingots up to 5 tonne.<br />
Certificate No. MD00/0054/0005/1 Expiry date: 21/01/2013<br />
ACERINOX EUROPA S.A.U. Cadiz<br />
Palmones<br />
11379 Los Barrios<br />
Cadiz<br />
Tel: +34 956 629300 Fax: +34 956 629311<br />
Certificate No. MD00/0057/0007/1 Expiry date: 16/12/2013<br />
ACEROS INOXIDABLES OLARRA S.A. Bilbao<br />
Larrabarria 1<br />
48150 Larrondo-Loiu<br />
Vizcaya<br />
Tel: +34 617 464 872 Fax: +34 944 531 392<br />
email: marian.tejedo@olarra.com web: www.olarra.com<br />
Certificate No. MD00/1753/0005/1 Expiry date: 09/09/2012<br />
ARCELOR MITTAL ESPAÑA Gijon<br />
Factoría de Avilés<br />
Apartado 90<br />
33402 Avilés<br />
Asturias<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Steelmaking<br />
Plates<br />
Coil<br />
Steelmaking<br />
Bars<br />
Steelmaking<br />
Semi-Finished<br />
Tel: +34 985 187299<br />
Email: mailto:juan-manuel.vigil@arcelormittal.comWeb page http://www.arcelormittal.com<br />
Certificate #: MD00/0460/0006/1 Expiry date: 31/08/2014<br />
ARCELOR MITTAL ESPAÑA Gijon<br />
Factoriá de Gijón<br />
Apartado 570<br />
33200 Gijón<br />
Plates<br />
Specified through thickness properties for plates up to 50mm thickness.<br />
Tel: +34 985 187299 Fax +34 985 187 519<br />
Email: mailto:juan-manuel.vigil@arcelormittal.com<br />
Web page http://www.arcelormittal.com<br />
Certificate No. MD00/1804/0008/1 Expiry date: 25/09/2014<br />
COMPAÑÍA ESPAÑOLA DE LAMINACIÓN, S.L. Barcelona<br />
Poligono Industrial 'San Vicente' s/n<br />
08755<br />
Castellbisbal (Barcelona)<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
E.A.F. / Ingot<br />
Blooms<br />
Billets<br />
Bars<br />
Structural<br />
E.A.F. / Con Cast<br />
Austenitic Stainless<br />
Austenitic Stainless<br />
E.A.F. / Con Cast<br />
Austenitic Stainless<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
E.A.F. / Con Cast<br />
Billets<br />
Normal Strength<br />
Normal Strength<br />
Tel: +34 630 970 990 Fax: +34 93 773 0552 Email:mailto:npoch@gcelsa.com Web:http://www.celsa.com<br />
<strong>Approved</strong> for the supply <strong>of</strong> continuously cast billets up to 180 x 180 mm.<br />
Certificate No. MD00/0343/0007/1 Expiry date: 22/03/2013<br />
Bars<br />
As below<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless, duplex stainless, Ferritic Stainless<br />
Steel*, Martensitic Stainless Steel*<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless, duplex Stainless, Ferritic Stainless<br />
Steel*, Martensitic Stainless Steel*<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless, duplex stainless, Ferritic Stainless<br />
Steel*, Martensitic Stainless Steel*<br />
carbon, carbon-manganese, alloy, austenitic<br />
stainless, duplex stainless, ferritic stainless*,<br />
martensitic stainless*<br />
470<br />
470<br />
470<br />
470<br />
As below<br />
304L, 316L, 321, 347 50<br />
304L, 316L, 321, 347 20<br />
austenitic stainless<br />
304L, 316L, 321 100<br />
carbon, carbon-manganese<br />
carbon, carbon-manganese 235<br />
A, B, D, E 80<br />
DH40, EH40, FH27S, FH32, FH36, FH40 25<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
80<br />
360FG, 410FG, 460FG, 490FG, 510FG 80<br />
As below<br />
A 180<br />
A 50<br />
A 35<br />
Steel types carbon <strong>and</strong> carbon-manganese cover the supply <strong>of</strong> billets for processing into normal strength steels according to the Society's Rules for the<br />
Manufacture, Testing <strong>and</strong> Certification <strong>of</strong> Materials, Chapter 3. The final processing mill is responsible for ordering steel which complies with their approved<br />
chemical composition <strong>and</strong> enables them to achieve the required mechanical properties<br />
Page<br />
63<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
GERDAU ACEROS ESPECIALES EUROPA S.L.<br />
(GERDAU)<br />
Bilbao Steelmaking<br />
E.A.F. / Con Cast<br />
As below<br />
Semi-Finished Blooms<br />
As below 300<br />
Planta Basauri<br />
Bo. Ugarte, S/N<br />
P.O. Box 76<br />
48970 Basauri (Vizcaya)<br />
Bars<br />
Machinery<br />
Chain Cable Stock<br />
carbon, carbon-manganese, alloy 100<br />
R3, R3S, R4, API-2F, R5 78<br />
U2, U3 100<br />
Tel +34 944 871 726 Fax +34 944 871826<br />
Email: mailto:alberto_cubero@gerdau.es<br />
Web: www.gerdau.es<br />
The approval for bars for chain cable stock grades R3 <strong>and</strong> R3S are restricted to supply to Vicinay Cadenas S.A. to purchasing specification CC-R3-R3S.<br />
The approval for bars for chain cable stock grade R4 is restricted to supply to Vicinay Cadenas S.A. to purchasing specification CC-R4.<br />
The approval for bars for chain cable stock grade R5 is restricted to supply to Vicinay Cadenas S.A. to purchasing specification MP-R5.<br />
The latest issue <strong>of</strong> the Vicinay purchasing specifications are accepted subject to these maintaining the required material conditions under which approval was<br />
granted.<br />
Certificate No. MD00/0051/0008/1 Expiry date: 22/01/2015<br />
GERDAU ACEROS ESPECIALES EUROPA S.L.<br />
(GERDAU)<br />
Planta Vitoria<br />
C/Portal De Gamarra, No. 22<br />
01013 Vitoria (Alava)<br />
Bilbao<br />
Bars<br />
Structural<br />
Machinery<br />
Tel: +34 94 516 4638 Fax: +34 94 516 4748 Email: mailto:jmanuel.couso@gerdau.es Web://www.gerdau.es<br />
Certificate Number: MD00/2076/0006/1 Expiry: 31/01/2015<br />
carbon, carbon-manganese, alloy 37<br />
carbon, carbon-manganese, alloy 37<br />
GERDAU SIDENOR FABRICA DE REINOSA Bilbao Steelmaking<br />
E.A.F. / Ingot<br />
As below<br />
Bars<br />
Normal Strength<br />
A 220<br />
Machinery<br />
carbon, carbon-manganese, alloy 220<br />
Chain Cable Stock<br />
R3, R3S, R4, API-2F, R5 185<br />
Paseo Alej<strong>and</strong>ro Calonje, 1<br />
39200 Reinosa (Cantabria)<br />
Tel: +34 942 775 187 Fax: +34 942 775 283 Email: mailto:josem.baz@gerdau.es Web http://www.sidenor.com<br />
The approval for bars for chain cable stock grades R3 <strong>and</strong> R3S are restricted to supply to Vicinay Cadenas S.A. to purchasing specification CC-R3-R3S.<br />
The approval for bars for chain cable stock grades R4 <strong>and</strong> R5* are restricted to supply to Vicinay Cadenas S.A. to purchasing specification MP-R4S.<br />
The approval for bars for chain cable stock in Grade R4 to 130mm diameter manufactured by con cast steelmaking at Fabrica de Basauri, rolling at Azkoita<br />
Plant, finishing at Reinosa are restricted for supply to Vicinay Cadenas S.A. to purchasing specification MP-R4S.<br />
The latest issue <strong>of</strong> the Vicinay purchasing specifications are accepted subject to these maintaining the required material conditions under which approval was<br />
granted.<br />
Certificate No. MD00/0546/0010/1 Expiry date: 20/06/2014<br />
HIERROS MARCELINO FRANCO S.A. Gijon<br />
Industrias Metálicas de Cancienes S.L. "INMECA"<br />
Avda. Conde Guadalhorce, 131<br />
33400 Avilés<br />
Asturias<br />
Fabricated Sections<br />
Tel: +34 985 56 60 67 Fax: +34 985 566 653 EMail mailto:hifransa@infonegocio.com<br />
Certificate No. MD00/2778/0004/1 Expiry date: 30/01/2013<br />
LAMINADOS LOSAL, S.A. Bilbao<br />
Bekoibarra, 9<br />
P.O. Box 17<br />
48300 - Gernika<br />
Tel: +34 946251400 Fax: +34 946254976<br />
Email: amontero@losal.es<br />
Web www.losal.es<br />
Certificate No. MD00/0993/0006/1 Expiry date: 19/01/2014<br />
Sections<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
RUGUI S.L.<br />
Poligono Industrial Basarte<br />
20720 Azcoitia (Guipuzcoa)<br />
Apdo. de Correos no. 8 Azpeitia (Guipuzcoa)<br />
San Sebastian Sections<br />
Normal Strength<br />
Higher Strength<br />
Tel: +34 943 857311 Fax: +34 943 857312 Email: mailto:rugui@rugui.com Web http://www.rugui.com<br />
The approved sections are in the form <strong>of</strong> flat bars up to a width <strong>of</strong> 150mm.<br />
Certificate No. MD00/1915/0005/1 Expiry date: 06/02/2014<br />
Page<br />
64<br />
A, B, D, E 25<br />
AH32, AH36, DH32, DH36, EH32, EH36 25<br />
A 25<br />
AH32, AH36, DH32, DH36, EH32, EH36, FH32, 11<br />
FH36<br />
A 25<br />
DH32, DH36 14<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
SIDENOR INDUSTRIAL S.L. (Gerdau Sidenor) San Sebastian Bars<br />
Machinery<br />
carbon, carbon-manganese, alloy 200<br />
Chain Cable Stock<br />
R4 117<br />
R3, R3S 123<br />
R5 150<br />
Ctra. de Zumárraga, s/n<br />
20720 Azcoitia<br />
Guipúzcoa<br />
Tel: +34 943 025206 Fax: +34 943 025299<br />
Email: mailto:juan.aizpuru@gerdau.es<br />
U1, U2, U3 152<br />
The approval for bars for chain cable stock grades R3 <strong>and</strong> R3S are restricted to supply to Vicinay Cadenas S.A. to purchasing specification CC-R3-R3S.<br />
The approval for bars for chain cable stock grade R4 is restricted to supply to Vicinay Cadenas S.A. to purchasing specification MP-R4.<br />
The approval for bars for chain cable stock grade R5 is restricted to supply to Vicinay Cadenas S.A. to purchasing specification MP-R5, this approval is with<br />
bars rolled from steel made at Sidenor Industrial S.L. Fabrica de Basauri plant.<br />
The latest issue <strong>of</strong> the Vicinay purchasing specifications are accepted subject to these maintaining the required material conditions under which approval was<br />
granted.<br />
Raw materials ingot <strong>and</strong> bloom are sourced from Basauri <strong>and</strong> Reinosa Plants <strong>and</strong> no longer produce steel.<br />
Web:http//:www:gerdau.es<br />
Certificate No. MD00/0620/0009/1 Expiry date: 27/03/2014<br />
Sweden<br />
AB SANDVIK MATERIALS TECHNOLOGY Stockholm<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Con Cast<br />
E.A.F. / Ingot<br />
Ingots<br />
Blooms<br />
Bars<br />
Bars<br />
Structural<br />
Machinery<br />
SE-811 81 S<strong>and</strong>viken<br />
Tel: +46 (0) 26 26 3792 Fax: +46 (0) 26 26 3785 Email: mailto:per.yhr@s<strong>and</strong>vik.com Web http://www.smt.s<strong>and</strong>vik.com<br />
Certificate No. MD00/2173/0005/1 Expiry date: 31/10/2012<br />
Billets<br />
austenitic stainless, duplex stainless<br />
austenitic stainless, duplex stainless<br />
austenitic stainless, duplex stainless 6<br />
austenitic stainless, duplex stainless 265<br />
austenitic stainless, duplex Stainless 150<br />
austenitic stainless, duplex stainless 195<br />
austenitic stainless, duplex stainless 185<br />
austenitic stainless, duplex stainless 185<br />
austenitic stainless, duplex stainless 185<br />
Semi Finished products austenitic <strong>and</strong> duplex stainless steel con-cast Blooms to 365mm wide, to 7500mm long; Con-cast Billets to 150mm wide, to 6200mm long;<br />
As rolled billets to 195mm wide, to 6000mm long; semi-finished as rolled bars to 185mm diameter, 6900mm long for further processing for Rolled, Forged<br />
Products<br />
OUTOKUMPU STAINLESS AB Stockholm<br />
Business Unit Special Coil & Plate<br />
Box 74<br />
SE-774 22 Avesta<br />
Steelmaking<br />
Plates<br />
Hot Rolled Coil<br />
E.A.F. / Con Cast<br />
Austenitic Stainless<br />
Duplex Stainless<br />
Austenitic Stainless<br />
Tel: +46 (0)226 81832 Fax: +46 (0)226 813 16 E-mail mailto:michael.larsson@outokumpu.com Web: http://www.outokumpu.com<br />
*accepted for approved applications<br />
Certificate No. MD00/0131/0006/1 Expiry date: 08/12/2011<br />
OUTOKUMPU STAINLESS AB Stockholm<br />
Thin Strip Nyby<br />
SE-64480 Torshälla<br />
Tel +46 (0)1634 9000 Fax +46 (0)1634 9014 Email: mailto:claes.gefvenberg@outokumpu<br />
Certificate No. MD00/0132/0005/1 Expiry date: 30/01/2013<br />
OUTOKUMPU STAINLESS AB Kristinehamn<br />
Business Unit Special Plate,<br />
Quarto Plate Europe,<br />
Coil<br />
Plates<br />
Austenitic Stainless<br />
Austenitic Stainless<br />
Duplex Stainless<br />
S-693 81 Degerfors,<br />
Tel: 46 586 47000 Fax: 46 586 47019 Email: mailto:bengt.o.eriksson@outokumpu.com Web: http://www.outokumpu.com<br />
* accepted for approved applications<br />
** Grade UNS 32304 may be accepted as equivalent to 316L as shown in LR Rules when properties meet the Rule requirements.<br />
Certificate Number MD00/1754/0006/1 Expiry date: 14/11/2014<br />
OUTOKUMPU STAINLESS AB Kristinehamn<br />
Degerfors Stainless<br />
SE-693 81 Degerfors<br />
Tel: +46 (0)586 47000/47 232 Fax: +46 (0)586 47008<br />
Email mailto:jorgen.johansson@outokumpu.com<br />
Web http://www.outokumpu.com<br />
EN 10088-1 grade 1.4462 accepted for approved applications only.<br />
Certificate number MD00/3144/0004/1 Expiry date: 08/06/2014<br />
Bars<br />
Page<br />
Duplex Stainless<br />
65<br />
As below<br />
304L, 304LN, 316L, 321, 347 12<br />
UNS S31803, UNS 32205* 8<br />
304L, 316L, 321, 347 8<br />
304L, 316L, 317L, 321 5<br />
304L, 316L, 316LN, 321 50<br />
UNS S32304** 10<br />
UNS S31803(MOD)* 50<br />
UNS S31803, UNS S32205* 200<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
OVAKO BAR AB. Stockholm Sections<br />
Normal Strength<br />
A, B, D, E 50<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
50<br />
Bars<br />
Normal Strength<br />
A, B, D, E 45<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
45<br />
Boxholm Works<br />
Box 5<br />
59010 Boxholm<br />
Tel: +46 0142 293600 Fax: +46 0142 293702 Email mailto: ulla.hjartkvist@ovako.com Web http://www.ovako.com<br />
Certificate No. MD00/0560/0008/1 Expiry date: 27/09/2014<br />
OVAKO BAR AB. Stockholm Steelmaking<br />
E.A.F. / Con Cast<br />
As below<br />
Sections<br />
Normal Strength<br />
A, B, D, E 50<br />
Higher Strength<br />
AH32, AH36, DH32, DH36, EH32, EH36 50<br />
Bars<br />
Normal Strength<br />
A, B, D, E 93<br />
Higher Strength<br />
AH32, AH36, DH32, DH36, EH32, EH36 93<br />
Machinery<br />
carbon, carbon-manganese 93<br />
Smedjebacken Works<br />
S-777 80 Smedjebacken<br />
Tel. +46 (0)240 668355 Fax +46 (0)240 668168 EMail mailto: torbjorn.sorhuus@ovako.com Web http://www.ovako.com<br />
Certificate #: MD00/0561/0005/1 Expiry date: 11/06/2013<br />
OVAKO HOFORS AB Stockholm<br />
Se-813 82 HOFORS<br />
Tel: +46 (0) 298 25000 Fax: +46 0298 25025<br />
Email: mailto:bjorn.olsson@ovako.com<br />
Web: www.ovako.com<br />
Certificate No. MD00/1167/0005/1 Expiry date: 28/11/2011<br />
OVAKO HOFORS AB Kristinehamn<br />
Bar Division<br />
Hällefors<br />
Steelmaking<br />
Semi-Finished<br />
71280 Hällefors<br />
Tel: +46 591 60375 Fax: +46 591 60623 Email: mailto:lilian.olovsdotter@ovako.com<br />
Certificate No. MD00/3747/0001/1 Expiry date: 17.12.2011<br />
SSAB EMEA AB Stockholm<br />
OXELÖSUND<br />
S-61380 Oxelösund<br />
Bars<br />
Bars<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
E.A.F. / Ingot<br />
Billets<br />
Bars<br />
Structural<br />
Machinery<br />
Chain Cable Stock<br />
Structural<br />
Machinery<br />
Chain Cable Stock<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
As below<br />
carbon, carbon-manganese, alloy 400<br />
carbon, carbon-manganese, alloy 450<br />
carbon, carbon-manganese, alloy 190<br />
carbon, carbon-manganese, alloy 170<br />
U3, R3, R3S, R4 165<br />
carbon, carbon-manganese, alloy 165<br />
carbon, carbon-manganese, alloy 165<br />
U1, U2, U3, R3, R3S, R4 165<br />
As below<br />
As below 286<br />
A, B, D, E 75<br />
FH27S 40<br />
AH27S, AH32, AH36, AH40, AH42, DH27S, 60<br />
DH32, DH36, DH40, EH27S, EH36<br />
DH42, EH32, EH40, EH42, FH32, FH36, FH40, 70<br />
FH42<br />
AH46, AH50, AH55, AH62, AH69, DH46, DH50, 80<br />
DH55, DH62, DH69, EH46, EH50, EH55, EH62,<br />
EH69, FH46, FH50, FH55, FH62, FH69<br />
460FG, 490FG, 510FG 60<br />
360FG, 410FG 75<br />
LTAH27S, LTAH32, LTAH36, LTAH40,<br />
40<br />
LTDH27S, LTDH32, LTDH36, LTDH40,<br />
LTEH27S, LTEH32, LTEH36, LTEH40, LTFH27S,<br />
LTFH32, LTFH36, LTFH40<br />
Tel +46 155 254783 Fax +46 155 254082 Email: mailto:sten.bielmrot@oxelosund.ssab.se Web:http://www.ssab.com<br />
All plates with specified through thickness properties.<br />
Semi-finished products in carbon <strong>and</strong> carbon-manganese steel with fine grain (element combinations as stated), slabs to 1680 mm wide, to 11000mm long <strong>of</strong><br />
maximum weight 30T for further processing to rolled products<br />
Materials Quality Scheme <strong>Approved</strong> - Approval No. MQS 049<br />
Certificate No. MD00/1282/0009/1 Expiry date: 25/04/2013<br />
Page<br />
66<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Switzerl<strong>and</strong><br />
STAHL GERLAFINGEN AG Stuttgart<br />
Steelmaking<br />
Sections<br />
Bahnh<strong>of</strong>strasse<br />
CH-4563 Gerlafingen<br />
Tel: +41 (0)32 674 2568 Fax: +41 (0)32 674 2842 Email: hjopatz@stahl-gerlafingen.com<br />
Certificate No. MD00/3438/0002/1 Expiry date: 01/03/2014<br />
Taiwan, Republic <strong>of</strong> China<br />
CHINA STEEL CORPORATION Kaohsiung<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
No.1 Chung Kang Road<br />
Hsiao Kang<br />
Kaohsiung<br />
Tel: +886 7 802 1111 ext 2208 Fax: +886 7 805 1292<br />
Email: 153171@mail.csc.com.tw<br />
Web page: www.csc.com.tw<br />
All grades are approved with specified with through thickness properties.<br />
Certificate No. MD00/0304/0008/1 Expiry date: 06/04/2014<br />
DRAGON STEEL CORPORATION Kaohsiung<br />
100, Longchang Road,<br />
Longjing Dist.,<br />
Taichung City<br />
Tel No. +886 4 2630 6088 EXT 6515 Fax No. +886 4 2630 6041<br />
Email 022349@dragonsteel.com.tw<br />
Web www.dragonsteel.com.tw<br />
Certificate no MD00/3768/0003/1 Expiry date: 03/04/2013<br />
T. S. STEEL COMPANY LTD. Kaohsiung<br />
No.6 Kon-Sixth Road<br />
Tsuang-Hine Industrial Zone<br />
Hsen-Kang Road<br />
Chang-Hua Hsien<br />
Tel: +886 4 798 0060 ext 12 Fax: +886 4 799 1522<br />
Email: fang123@tssteel.com.tw<br />
Certificate No. MD00/2313/0006/1 Expiry date: 10/04/2014<br />
TUNG HO STEEL ENTERPRISE CORP. Taipei<br />
Miao Li Works<br />
No.22, Pingding Erhu Village,<br />
Sihu Township,<br />
Miaoli County 36842,<br />
Sections<br />
Sections<br />
Bars<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
E.A.F. / Con Cast<br />
Blooms<br />
Tel: +88 637 92333 Fax: +88 637 923311 Email mailto:h32wht@tunghosteel.com Web http://www.tunghosteel.com<br />
Certifcate Number: MD00/3719/0001/1 Expiry date: 15/12/2012<br />
TUNG HO STEEL ENTERPRISE CORP. Taipei<br />
Kaohsiung Works<br />
No. 8, Chia Hsing Street,<br />
Hsiao Kang,<br />
Kaohsiung City<br />
Sections<br />
Normal Strength<br />
Higher Strength<br />
Tel: +88 6 7802 3131 Fax: +88 6 801 0696 Email mailto:k23@tunghosteel.com Web http://www.tunghosteel.com<br />
Certificate Number: MD00/3720/0001/1 Expiry date: 16/12/2012<br />
WALSIN LIHWA CORP. Kaohsiung<br />
Steelmaking<br />
Semi-Finished<br />
Page<br />
E.A.F. / Con Cast<br />
Slabs<br />
Billets<br />
67<br />
As below<br />
A, B 15<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 10<br />
As below<br />
Normal strength, Higher Strength 270<br />
A, B, D, E 50<br />
AH47, DH47, EH47 65<br />
AH27S, AH32, AH36, AH40, DH27S, DH32,<br />
DH36, DH40, EH27S, EH32, EH36, EH40<br />
75<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 50<br />
AH32, AH36, DH32, DH36 26<br />
A 15<br />
AH32, AH36 12<br />
A 25<br />
As below<br />
carbon, carbon-manganese 430<br />
A 18<br />
AH27S, AH32, AH36 18<br />
austenitic stainless, duplex stainless<br />
austenitic stainless, duplex stainless 200<br />
austenitic stainless, duplex stainless 240<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Yenshui Plant<br />
3-10 Shi Jou Liau<br />
Chin Shuei Li<br />
Yenshui Chen<br />
737 Tainan Hsien<br />
Tel +886 6 6520911 ext. 407 Fax +886 6 6533076 Email mailto:nina_chen@walsin.com Web http://www.walsin.com<br />
Certificate No. MD00/3063/0003/1 Expiry date: 15/03/2013<br />
Semi Finished Products Austentic & Duplex Stainless slabs to 1300mm wide, to 12000mm long; square billets to 155mm wide, 12000mm long; round billets with<br />
maximum diameter 240mm , to 12000mm long<br />
Thail<strong>and</strong><br />
LPN PLATE MILL PUBLIC COMPANY LIMITED Bangkok<br />
199/9 Moo 4 Suksawad Road<br />
Pakklong Bangplakod<br />
Prasamutjedee<br />
Samutprakarn 10290<br />
Tel: +66 2815 6400-9 Fax: +66 2815 6415<br />
Email: mailto:labtest@lpngroup.co.th<br />
Web: www.lpnpm.co.th<br />
Certificate No. MD00/2578/0006/1 Expiry date: 02/09/2014<br />
SAHAVIRIYA PLATE MILL PUBLIC COMPANY<br />
LIMITED<br />
Chachoengsao<br />
160 Moo 14 Sukhumvit Road<br />
Bangpakong<br />
Chachoengsao 24130<br />
Bangkok<br />
Plates<br />
Plates<br />
Tel: +66 3883 2056 ext 162 Fax: +66 3853 2370 Email mailto: natthawut.l@spm-plate.com<br />
Certificate No. MD00/2579/0006/1 Expiry date: 01/09/2014<br />
SAHAVIRIYA STEEL INDUSTRIES PUBLIC<br />
COMPANY LIMITED<br />
Prachuab Kirikhan<br />
9M.7 Tumbol Mearumphueng<br />
Amphur Bang Saphan<br />
Prachuab Kirikhan 77140<br />
Bangkok<br />
Tel: (+66) 32 691403-5 ext 5118 Fax: (+66) 32 691408<br />
Email mailto: savarinr@ssi-steel.com<br />
Web http://www.ssi-steel.com<br />
Certificate No. MD00/3764/0001/1 Expiry date: 24/09/2012<br />
Tunisia<br />
PALESCANDOLO CNT sarl Naples<br />
Parc D' Activite' Economique De Bizerte<br />
7000 Bizerte<br />
Tel: + 21 77 241 7292 Fax: +21 77 241 7552 Email: apalescnt@yahoo.fr<br />
Certificate Number: MD00/4018/0001/1 Expiry: 26/04/2012<br />
Hot Rolled Coil<br />
Plates from coils<br />
Fabricated Sections<br />
Page<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Boiler <strong>and</strong> Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
68<br />
A 50<br />
360AR, 410AR 40<br />
A, B 40<br />
360AR, 410AR 32<br />
B, D 8<br />
A 19<br />
360, 410 19<br />
B, D 8<br />
A 19<br />
360AR, 410AR 19<br />
A 25<br />
AH32, AH36 25<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Turkey<br />
ASIL CELIK SANAYI VE TICARET A.S. Istanbul<br />
Steelmaking<br />
Gemic Koyu Mevki 16800<br />
Orhangazi, Bursa<br />
Tel: +90 224 280 61 00 Fax: +90 224 280 62 00 Email mailto:quality@asilcelik.com.tr<br />
Web http://www.asilcelik.com.tr<br />
Certificate No. MD00/1921/0005/1 Expiry date: 06/05/2013<br />
Bars<br />
E.A.F./Ingot/Con Cast<br />
Structural<br />
Machinery<br />
As below<br />
carbon, carbon-manganese, alloy 300<br />
carbon, carbon-manganese, alloy 220<br />
EREGLI DEMIR VE CELIK FABRIKALARI T.A.S. Istanbul Steelmaking<br />
B.O.S. / Con Cast<br />
As below<br />
Plates<br />
Normal Strength<br />
A, B, D, E 60<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36, FH27S, FH32, FH36<br />
60<br />
Boiler & Pressure Vessel 360FG, 410FG, 460FG, 490FG, 510FG 60<br />
Hot Rolled Coil Normal Strength<br />
A, B, D, E 15<br />
Higher Strength<br />
AH32, AH36, DH32, DH36, EH27S, EH32, EH36,<br />
FH27S, FH32, FH36<br />
15<br />
Boiler & Pressure Vessel 360FG, 410FG, 460FG, 490FG, 510FG 15<br />
KDZ. Eregli<br />
67330<br />
Zonguldak<br />
Tel: +90 (0)372 329 3838 Fax: +90 (0)372 323 2598 Email: mailto:kaygoren@erdemir.com.tr Web http://www.erdemir.com.tr<br />
Certificate No. MD00/1951/0009/1 Expiry date: 06/05/2014<br />
ÖZKAN DEMIR ÇELIK SANAYI A.S. Istanbul<br />
Bozköy Köyü<br />
13. Cadde N:4 35800<br />
Aliaga-Izmir<br />
Tel +90 232 625 1010 Fax +90 232 625 1111<br />
Email: info@ozkansteel.com<br />
Web: http://www.ozkansteel.com<br />
Certificate No. MD00/2984/0003/1 Expiry date: 02/04/2014<br />
Ukraine<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
E.A.F. / Con Cast<br />
Blooms/Billets<br />
Normal Strength<br />
Higher Strength<br />
CJSC DONETSKSTEEL IRON AND STEEL WORKS Mykolaiv Steelmaking<br />
OH/Ingot/ Con Cast<br />
141 Tkachenko St<br />
Donetsk region<br />
83062 Donetsk<br />
Semi-Finished Ingots<br />
Slabs<br />
Tel: +38 (0622) 61-27-44 or 61-31-62 Fax: +38 (062) 388 04 21 Email: mailto:oksp@donmz.donetsk.ua<br />
Certificate No. MD00/3134/0003/1 Expiry date: 27/01/2014<br />
JSC "DNERPOTYAZHMASH" Mykolaiv<br />
3, Sukhoi Ostrov St.<br />
Post Code 49600<br />
Dnepropetrovsk<br />
Steelmaking<br />
Tel: +38 (056) 3703037 Fax: +38 (056) 3703037 Email: main@dtm.dp.ua Web: eee.dtm.dp.ua<br />
Certificate No. MD00/2825/0004/1 Expiry date: 19/09/2013<br />
JSC ELECTROMETALLURGICAL WORKS<br />
DNEPROSPETSSTAL<br />
after A.N. Kuzmin<br />
81 Yuzhnoye Shosse<br />
Zaporozhye, 69008<br />
Mykolaiv<br />
Tel: +38 612 223 627 Fax No: +38 612 131 780<br />
Email : OUKN@dss.com.ua<br />
Web http://www.dss-ua.com<br />
Including forged bars <strong>and</strong> tube blanks ( billets) in all qualities.<br />
Certificate No. MD00/2225/0006/1 Expiry date: 05/07/2013<br />
Steelmaking<br />
Bars<br />
Page<br />
E.A.F. / Ingot<br />
E.A.F. / Ingot<br />
Austenitic Stainless<br />
Machinery<br />
Chain Cable Stock<br />
69<br />
As below<br />
carbon, carbon manganese 260<br />
D, E 12<br />
A, B 25<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
28<br />
As Below<br />
carbon, carbon-manganese 5<br />
carbon, carbon-manganese 150<br />
carbon, carbon-manganese<br />
As below<br />
304L, 316L, 321 215<br />
carbon, carbon-manganese, alloy 300<br />
U1, U2, U3 85<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
PJSC "ALCHEVSK IRON & STEEL WORKS" Mykolaiv Steelmaking<br />
OH/Ingot/ Con Cast As Below<br />
Semi-Finished Slabs<br />
Normal strength, Higher Strength 300<br />
Plates<br />
Normal Strength<br />
D, E 45<br />
B 50<br />
A 72<br />
Higher Strength<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
50<br />
Boiler & Pressure Vessel 360AR, 410AR 22<br />
360FG, 410FG, 460FG, 490FG, 510FG 50<br />
360, 410 72<br />
Sections<br />
Normal Strength<br />
A 8<br />
Bars<br />
Normal Strength<br />
A 100<br />
Shmidt st. 4, Alchevsk<br />
Lugansk Region<br />
94202<br />
Tel: +38 06442 7 33 20 Fax: +38 06442 97 33 76<br />
EMail: mailto:abrosimov@amk.lg.ua<br />
Web page http://www.amk.lg.ua<br />
Certificate No. MD00/0088/0008/1 Expiry date: 28/07/2014<br />
PJSC "AZOVSTAL IRON & STEEL WORKS" Mykolaiv<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
B.O.S. / Con Cast<br />
Slabs<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
1, Leporsky St.<br />
Mariupol 87500<br />
Tel: +380 629 467 108 Fax: +380 629 468 441 Telex: 115123 VOLNA UX<br />
Email mailto:sal@@azovstal.com.ua<br />
Web http://www.azovstal.metinvestholding.com<br />
Including plates with specified through thickness properties. Z35 may be applied to all grades <strong>and</strong> thicknesses<br />
Certificate No. MD00/0779/0008/1 Expiry date: 15/02/2015<br />
PJSC "DONETSK IRON AND STEEL WORKS" Mykolaiv<br />
Plates<br />
122 Tkachenko St<br />
Donetsk 83062<br />
Tel: +38 0622 61 26 35 Fax: +38 0623 3880 421 Email:mailto:oksp@donmz.donetsk.ua<br />
Certificate No. MD00/2239/0006/1 Expiry date: 10/07/2013<br />
PJSC "ENERGOMASHSPETSSTAL" Mykolaiv<br />
84306 Kramatorsk<br />
Donetsk Region<br />
Tel: +38 (06264) 6-94-93 Fax: +38 (06264) 6-94-93<br />
Email: nosenkonina@emss.dn.ua<br />
Certificate No. MD00/3575/0001/1 Expiry date: 16/03/2015<br />
PJSC "ILYICH IRON AND STEEL WORKS" Mykolaiv<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
E.A.F. / Ingot<br />
Ingots<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
1 Levchenko Street<br />
Mariupol 87504<br />
All grades <strong>and</strong> thicknesses with specified through thickness properties. Notation Z25 or Z35 may be added.<br />
Tel: +38 (0)0 629 4343 23 Fax: +38 (0)62 5300 39 Web http://www.ilyich.com.ua<br />
Certificate No. MD00/0775/0005/1 Expiry date: 03/07/2013<br />
PJSC ENAKIEVO IRON AND STEEL WORKS Mykolaiv<br />
Metallurgov Avenue, 9<br />
Yenakievo<br />
Donetsk region<br />
86429<br />
Tel +38 (0)6252 92318 Fax +38 (0)6252 92235 Telex 115738"shlak"<br />
Email:yurly.anikanov@enakievosteel<br />
Certificate No. MD00/3121/0003/1 Expiry date: 05/12/2013<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
Page<br />
B.O.S. / Ingot<br />
Ingots<br />
Normal Strength<br />
Higher Strength<br />
70<br />
As below<br />
Normal strength, Higher Strength 270<br />
D, E 50<br />
A, B 100<br />
AH27S, AH32, AH36, AH40, DH27S, DH32,<br />
DH36, DH40, EH27S, EH32, EH36, EH40<br />
50<br />
360, 410, 360FG, 410FG, 460FG, 490FG, 510FG 50<br />
D 16<br />
A, B 20<br />
DH27S, DH32 16<br />
AH27S, AH32 20<br />
360AR, 410AR 20<br />
As below<br />
carbon, carbon-manganese, alloy 250<br />
As below<br />
E 50<br />
A, B, D 80<br />
DH40, EH40 25<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
50<br />
360AR, 410AR, 460AR 25<br />
360FG, 410FG 80<br />
As below<br />
carbon, carbon-manganese 9<br />
A, B 11<br />
AH27S, AH32, AH36, DH27S, DH32 11<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
United Kingdom<br />
CAPARO MERCHANT BAR PLC. Scunthorpe<br />
Caparo House<br />
P.O. Box 15<br />
Scunthorpe<br />
DN16 1XL<br />
Tel +44 (0)1724 403022 Fax +44 (0)1724 403044<br />
Email: mailto:mike.hill@cmbplc.co.uk Web: www.cmbplc.co.uk<br />
Certificate No. MD00/1599/0006/1 Expiry date: 30/11/2012<br />
CELLBEAM LTD. Liverpool<br />
Thorp Arch Trading Estate<br />
Wetherby<br />
West Yorkshire LS23 7DB<br />
Tel: +44 (0)1737 840600<br />
Email: neil.powell@cellbeam.co.uk<br />
Web: www.cellbeam.co.uk<br />
Certificate No. MD00/3534/0004/1 Expiry date: 11/11/2014<br />
CELSA MANUFACTURING (UK) LTD. Southampton<br />
Sections Mill<br />
Tremorfa Works<br />
Seawall Road,<br />
Tremorfa,<br />
Cardiff. CF24 5TH<br />
Tel: +44 (0) 1568 615201 Fax: +44 (0) 1568 612626<br />
Certificate No. MD00/3552/0003/1 Expiry date: 16/12/2014<br />
Sections<br />
Bars<br />
Fabricated Sections<br />
Steelmaking<br />
Semi-Finished<br />
Sections<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
Higher Strength<br />
High Strength<br />
E.A.F. / Con Cast<br />
Blooms/Billets<br />
Concast blooms/billets covers billets to 140mm x140mm <strong>and</strong> concast 'mini slabs' to 280 x 120mm.<br />
NIAGARA (HOT ROLLED) Coventry (UK<br />
Ind. Operations)<br />
Sections<br />
Bars<br />
Normal Strength<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
Peartree Lane<br />
Woodside, Dudley<br />
West Midl<strong>and</strong>s DY2 0QS<br />
Tel: +44 (0) 1384 471200 Fax: +44 (0)1384 471201 Email: mailto:hotrolled@niag.com Web: http://www.niag.com<br />
Certificate No. MD00/2618/0006/1 Expiry date: 21/02/2013<br />
OUTOKUMPU STAINLESS LTD. Scunthorpe<br />
LONG PRODUCTS BUSINESS UNIT, SMACC<br />
P.O. Box 161<br />
Europa Link<br />
Sheffield, S9 1TZ<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F/A.O.D/L.A.F/ConCast<br />
Ingots<br />
Slabs<br />
Blooms/Billets<br />
A, B, D, E 12<br />
AH32, AH36, DH32, DH36 12<br />
A, B, D, E 50<br />
AH32, AH36, DH32, DH36 50<br />
AH32, AH36, DH32 18<br />
DH36 30<br />
EH46-TM 20<br />
As below<br />
Normal Strength 140<br />
A 25<br />
A 50<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 32<br />
EH27S, EH32, EH36<br />
A 50<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
stainless steel<br />
stainless steels 5<br />
stainless steel 30<br />
stainless steel 30<br />
The approval for steelmaking <strong>and</strong> ingots, slabs, blooms <strong>and</strong> billets in stainless steel covers the supply <strong>of</strong> austenitic, duplex, ferritic, martensitic <strong>and</strong> precipitation<br />
hardening grades, in accordance with the Society's Rules for the Manufacture, Testing <strong>and</strong> Certification <strong>of</strong> Materials, Chapter 3 or appropriate international or<br />
national st<strong>and</strong>ards. The final processing mill is responsible for ordering steel which complies with their surface <strong>and</strong> internal quality st<strong>and</strong>ards <strong>and</strong> approved<br />
chemical composition to enables them to achieve the required physical <strong>and</strong> mechanical properties.<br />
Tel: +44 (0)114 2616292 Fax: +44 0114 2616163<br />
Email: mailto:richard.firman@outokumpu.com<br />
Web: http://www.outokumpu.com<br />
Certificate No. MD00/1883/0006/1 Expiry date: 03/01/2013<br />
SAHAVIRIYA STEEL INDUSTRIES UK Liverpool<br />
Steel House<br />
Redcar<br />
TS10 5QW<br />
Tel: +44 01642 408053<br />
Email: david.reevell@ssi-steel.co.uk<br />
Web: http://www.ssi-steel.co.uk<br />
Certificate No. MD00/4057/0001/1 Expiry date: 22/07/2015<br />
Steelmaking<br />
Semi-Finished<br />
Page<br />
B.O.S. / Con Cast<br />
Slabs<br />
71<br />
As below<br />
carbon, carbon-manganese 305<br />
50<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
SHEFFIELD FORGEMASTERS INTERNATIONAL Scunthorpe Steelmaking<br />
E.A.F. / Ingot<br />
carbon, carbon-manganese, alloy, austenitic<br />
LTD.<br />
P.O. Box 286<br />
stainless<br />
Brightside Lane<br />
Sheffield S9 2RW<br />
Tel: +44 (0)114 2449071 Fax: +44 (0)114 2422103<br />
Email:mailto:sales@sfm.com<br />
Web:http://www.sheffieldforgemasters.com<br />
Certificate No. MD00/0524/0007/1 Expiry date: 01/07/2014<br />
TATA STEEL (UK) LTD Glasgow<br />
Dalzell<br />
Motherwell ML1 1PU<br />
Plates<br />
Normal Strength<br />
Higher Strength<br />
Tel: +44 (0)1698 266100 Fax: +44 (0) 1698 266100 Ext. 394 Web page http:\\www.corusgroup.com<br />
All plates with specified through thickness properties.<br />
Materials Quality Scheme <strong>Approved</strong> - Approval No. MQS030<br />
Certificate No. MD00/0235/0009/1 Expiry date: 19/05/2014<br />
TATA STEEL (UK) LTD Scunthorpe<br />
Scunthorpe<br />
P.O. Box 1<br />
Scunthorpe DN16 1BP<br />
Steelmaking<br />
Semi-Finished<br />
Plates<br />
Sections<br />
Tel: +44 1724 404040 Email:maito: shipbuilding@tatasteel.com Web:http://www.tatasteel.com<br />
All plates with through thickness properties.<br />
Materials Quality Scheme <strong>Approved</strong> - Approval No. MQS029<br />
Certificate #: MD00/0240/0012/1 Expiry date: 24/07/2012<br />
TATA STEEL (UK) LTD Middlesbrough<br />
Teesside<br />
Redcar<br />
Teesside<br />
TS10 5RD<br />
Sections<br />
Tel: +44 (0)1642 406583 Fax: +44 (0)1642 406904 Email: mailto:Robin.Davies@corusgroup.com<br />
Materials Quality Scheme <strong>Approved</strong> - Approval No. MQS031<br />
Certificate #: MD00/0242/0013/1 Expiry date: 02/06/2014<br />
TATA STEEL (UK) LTD Newcastle upon Sections<br />
Tyne<br />
Page<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
B.O.S./Ingot/Con Cast<br />
Slabs<br />
Blooms/Billets<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Ferritic Low Temperature<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
Normal Strength<br />
Higher Strength<br />
72<br />
E 50<br />
A, B, D 100<br />
FH40 25<br />
FH32, FH36 30<br />
AH42, AH46 36<br />
AH40, DH40, DH42, DH46, EH40, EH42, EH46 65<br />
AH32, AH36, DH32, DH36, EH32, EH36 75<br />
460FG, 490FG, 510FG 75<br />
360FG, 410FG 100<br />
LTFH40 25<br />
LTAH32, LTAH36, LTAH40, LTDH32, LTDH36,<br />
LTDH40, LTEH32, LTEH36, LTEH40, LTFH32,<br />
LTFH36<br />
30<br />
As below<br />
carbon, carbon-manganese 305<br />
carbon, carbon-manganese 355<br />
E 50<br />
B, D 60<br />
A 80<br />
FH40, FH42, FH46 25<br />
AH40, AH42, AH46, DH40, DH42, DH46, EH40,<br />
EH42, EH46<br />
30<br />
FH32, FH36 50<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
70<br />
360AR, 410AR 40<br />
360FG, 410FG, 460FG, 490FG, 510FG 70<br />
360, 410 80<br />
LTAH27S, LTAH32, LTAH36, LTAH40,<br />
LTDH27S, LTDH32, LTDH36, LTDH40,<br />
LTEH27S, LTEH32, LTEH36, LTEH40<br />
30<br />
A, B, D, E 50<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
50<br />
A, B, D, E 77<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 77<br />
A, B, D, E 20<br />
AH40, DH40 15<br />
AH32, AH36, DH32, DH36, EH32, EH36 20<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
Skinningrove<br />
P.O. Box 1<br />
Saltburn by the Sea<br />
TS13 4ET<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Tel: +44 (0)1287 640212 Fax: +44 (0)1287 643467 Email: mailto:Bary.Atkinson@corusgroup.com<br />
Materials Quality Scheme <strong>Approved</strong> - Approval No. MQS032<br />
Certificate #: MD00/0243/0010/1 Expiry date: 18/08/2014<br />
TATA STEEL (UK) LTD Newcastle upon Steelmaking<br />
Tyne<br />
Teesside Cast Products<br />
Steel House<br />
Redcar<br />
Teesside, TS10 5RD<br />
Materials Quality Scheme <strong>Approved</strong> - Approval No. MQS 033<br />
Certificate #: MD00/3130/0004/1 Expiry date: 03/06/2011<br />
Semi-Finished<br />
TATA STEEL UK LIMITED Coventry (UK<br />
Ind. Operations)<br />
Fabricated Sections<br />
Corby Works<br />
P.O. Box 101, Weldon Road<br />
B.O.S. / Con Cast<br />
Slabs<br />
Blooms/Billets<br />
Structural Sections<br />
Corby<br />
Northamptonshire<br />
NN17 5UA<br />
Tel: +44 (0)1536 404704 Fax: +44 (0)1536 404212 Email: mailto:stewart.jeffrey@tatasteel.com Web: http://www.tatasteel.com<br />
Includes fabricated hollow sections<br />
Certificate No. MD00/0234/0001/1 Expiry date: 26/02/2015<br />
TATA STEEL UK LIMITED Newcastle upon Sections<br />
Tyne<br />
Hartlepool Works<br />
20 Inch H.F.I. Pipe Mill<br />
Fabricated Sections<br />
Normal Strength<br />
Higher Strength<br />
Structural Sections<br />
As below<br />
Brenda Road<br />
Hartlepool<br />
Teeside TS25 2EG<br />
Tel: +44 (0)1429 527249 Mob: +44 (0)7743 842969 Email: mailto:david.evans@tatsteel.com Web:http://www.tatasteeleurope.com<br />
Certificate #: MD00/0236/0007/1 Expiry date: 10/09/2014<br />
TATA STEEL UK LIMITED Scunthorpe<br />
Rotherham & Stocksbridge Sites<br />
Stocksbridge<br />
Sheffield<br />
South Yorkshire S36 2JA<br />
Tel: +44 (0)114 2832043 Fax:<br />
Email mailto:enquiries.ces@tatasteel.com<br />
Web page http://www.tatasteeleurope.com<br />
Certificate No. MD00/1593/0006/1 Expiry date: 04/07/2014<br />
TATA STEEL UK LIMITED Liverpool<br />
Port Talbot Works<br />
Port Talbot<br />
SA13 2NG<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F./Ingot/Con Cast<br />
Ingots<br />
Semi-finished Products<br />
Machinery<br />
Chain Cable Stock<br />
B.O.S. / Con Cast<br />
Tel: +44 (0)1698 266100 Fax: +44 (0) 1698 266100 Ext. 394 Web page http:\\www.corusgroup.com<br />
Approval covers concast slabs to nominal size 1850mm wide x 10,000mm long to the maximum thickness for further processing to rolled products.<br />
Certificate No.: MD00/3909/0001/1 Expiry Date: 05.05.2014<br />
Page<br />
Slabs<br />
73<br />
carbon, carbon-manganese 295<br />
carbon, carbon-manganese 305<br />
carbon, carbon-manganese 16<br />
A 20<br />
AH27S, AH32, AH36, DH27S, DH32, DH36,<br />
EH27S, EH32, EH36<br />
20<br />
carbon, carbon-manganese 20<br />
carbon, carbon-manganese, alloy<br />
as below 13<br />
carbon, carbon-manganese, alloy 381<br />
carbon, carbon-manganese, alloy 300<br />
U1, U2, U3, R3, R3S, R4 165<br />
As below<br />
carbon, carbon-manganese 238<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
United States <strong>of</strong> America<br />
ARCELORMITTAL BURNS HARBOR Chicago<br />
250 West Highway 12<br />
Burns Harbor<br />
IN 46304-9745<br />
Steelmaking<br />
Plates<br />
Tel: +1 219 787 4553 Fax: 1 219 787 2139 Email mailto:daniel.elwood@mittalsteel.com<br />
Certificate No. MD00/2331/0005/1 Expiry date: 18/12/2012<br />
ELLWOOD QUALITY STEEL COMPANY Chicago<br />
700 Moravia Street<br />
New Castle<br />
Pennsylvania 16101<br />
Tel: +1 724 658 6849 Fax: +1 724 658 6802<br />
Email mailto:slubinski@elwd.com<br />
Web: www.egi.org<br />
Certificate No. MD00/2652/0005/1 Expiry date: 15/02/2015<br />
EVRAZ CLAYMONT STEEL, Philadelphia<br />
4001 Philadelphia Pike,<br />
Claymont,<br />
Delaware,<br />
19703<br />
Tel No. +01 302 792 5400 Fax No. +01 302 792 0203<br />
Email: scott. diestelkamp@EvrazIncNA.com<br />
Web: www.EvrazIncNA.com<br />
Certificate No. MD00/3833/0001/1 Expiry date: 22/09/2013<br />
EVRAZ OREGON STEEL MILLS Los Angeles<br />
Steelmaking<br />
Semi-Finished<br />
Steelmaking<br />
Plates<br />
Plates<br />
14400 N. Rivergate Blvd.<br />
Portl<strong>and</strong><br />
OR 97203<br />
Tel: +1 503 978 6130 Fax: +1 503 978 4975<br />
Email: mailto:Christine.wrinkle@evrazincna.com Web http://www.evrazincna.com<br />
Including all plate grades <strong>and</strong> thicknesses with specified through thickness properties (Z35)<br />
MATERIALS QUALITY SCHEME APPROVED - MQS 047<br />
Certificate No. MD00/1152/0006/1 Expiry date: 01/06/2015<br />
JSW STEEL (USA) INC. Houston<br />
Plates<br />
B.O.S. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
E.A.F. / Ingot<br />
Ingots<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
5200 East McKinney Road<br />
Baytown<br />
Texas 77523<br />
Tel: +1 281 383 5100 Fax: +1 281 383 1803 Email mailto: bankim.shukla@jswsteel.us Web: http://www.jswsteel.com<br />
Certificate No. MD00/3505/0002/1 Expiry date: 26/08/2014<br />
NUCOR STEEL MEMPHIS, INC Chicago<br />
3601 Paul R. Lowry Road<br />
Memphis<br />
TN 38109<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F. / Con Cast<br />
Rolled Round Bars<br />
As Cast Round Section<br />
Rolled Square Bars<br />
Tel: +1 901 786 5416 Fax: +1 901 788 5300 Email to: Gail.Farrow@nucor.com Web http://www.nucor.com<br />
Certificate No. MD00/4059/0001/1 Expiry date: 22/07/2015<br />
NUCOR STEEL TUSCALOOSA INC. New Orleans<br />
Steelmaking<br />
Hot Rolled Coil<br />
Plates from coils<br />
Page<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Boiler & Pressure Vessel<br />
Normal Strength<br />
Higher Strength<br />
74<br />
As below<br />
D 35<br />
A, B 50<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 75<br />
EH27S, EH32, EH36<br />
carbon, carbon-manganese, alloy<br />
carbon, carbon-manganese, alloy 38<br />
As below 248<br />
A, B 75<br />
A, B, D 50<br />
AH27S, AH32, AH36, DH27S, DH32, DH36 12<br />
360AR, 410AR 40<br />
360FG, 410FG 50<br />
E 51<br />
A, B, D 102<br />
AH27S, AH32, AH36, DH27S, DH32, DH36, 102<br />
DH40<br />
360FG, 410FG, 460FG, 490FG, 510FG 102<br />
As below<br />
Carbon, Carbon-manganese, Alloy 203<br />
Carbon, Carbon-manganese, Alloy 511<br />
Carbon, Carbon-manganese, Alloy 254<br />
As below<br />
A 20<br />
360FG, 410FG 20<br />
A 20<br />
AH27S, DH27S, AH32, DH32, AH36, DH36 13<br />
As at 06 November 2012
<strong>List</strong> 1<br />
<strong>Approved</strong> <strong>Steelmakers</strong> <strong>and</strong> <strong>Manufacturers</strong> <strong>of</strong><br />
Rolled Steel Plates, Strip, Sections & Bars<br />
Name <strong>and</strong> Address<br />
1700 Holt Road N.E.<br />
Tuscaloosa<br />
AL 35404-1000<br />
LR Office Product<br />
Category<br />
Grade<br />
Max Thickness/Diameter (mm)<br />
Tel: +1 205 562 1200 Fax: +1 205 556 1482 Email to: jon.miller@nucor.com Web http://www.nucor.com<br />
Materials Quality Scheme approved - MQS048<br />
Certificate No. MD00/3323/0004/1 Expiry date: 05/08/2015<br />
REPUBLIC ENGINEERED PRODUCTS Chicago<br />
HOT ROLLED BAR DIVISION<br />
CANTON WORKS<br />
Steelmaking<br />
Semi-Finished<br />
Bars<br />
E.A.F./Ingot/Con Cast<br />
Ingots<br />
Semi-finished Products<br />
As below<br />
carbon, carbon-manganese, alloy 14<br />
carbon, carbon-manganese 365<br />
2633 Eighth Street N.E.<br />
Canton<br />
Ohio 44704-2311<br />
Tel: +1 330 438 5541 Fax: +1 330 438 5213 Email: mailto:dwalvoord@republicengineered.com Web: http://www.republicengineered.com<br />
Ingots as semi finished products, nominal 740mm diameter x 4800mm, are approved for further processing for forgings to the maximum un-cropped weight<br />
shown above.<br />
Certificate #: MD00/2236/0005/1 Expiry date: 15/05/2013<br />
SSAB ALABAMA, INC. New Orleans<br />
12400 Highway 43 North<br />
Axis<br />
Alabama 36050<br />
Steelmaking<br />
Plates<br />
E.A.F. / Con Cast<br />
Normal Strength<br />
Higher Strength<br />
Boiler & Pressure Vessel<br />
Tel: + 01 256-546-2669 Fax: +01 256-546-2670 email mailto:lbridges@ipsco.com Web http://www.ipsco.com<br />
Materials Quality Scheme <strong>Approved</strong> - MQS 042<br />
Certificate No. MD00/3108/0006/1 Expiry date: 30/03/2014<br />
THE TIMKEN COMPANY STEEL BUSINESS Chicago<br />
1835 Dueber Avenue S.W.<br />
Canton<br />
OH 44706-0932<br />
Steelmaking<br />
Semi-Finished<br />
E.A.F./Ingot/Con Cast<br />
TTel: +1 330 471 3263 Fax: +1 330 471 4077 Email: mailto:robert.w.h<strong>of</strong>f@timken.com Werb: http://www.timken.com<br />
Bars as Semi Finished Products approved for further processing for forgings <strong>and</strong> for use as billets for seamless tube production.<br />
Certificate No. MD00/1510/0005/1 Expiry date: 12/01/2014<br />
Page<br />
Bars<br />
75<br />
As below<br />
D 35<br />
A, B 50<br />
AH27S, AH32, AH36, DH32, DH36 38<br />
360FG, 410FG, 460FG, 490FG, 510FG 38<br />
As below<br />
carbon, carbon-manganese, alloy 330<br />
As at 06 November 2012