2 - Siemens

More documents

Recommendations

Info

SIMODRIVE 611 Planning Guide Drive Converter Valid for 6SN11- series 02.03 Edition Foreword, Contents Overview of the Drive System System Configuration Motor Selection and Position/Speed Sensing Power Modules Control Modules Infeed Modules Line Supply Connection Supplementary System Components Important Circuit Information Cabinet Design and EMC Connection Diagrams Drawings EC Declaration of Conformity Abbreviations and Terminology References Certificates Index 1 2 3 4 5 6 7 8 9 10 11 12 A B C D I
Page 1: Planning Guide 02/2003 Edition Driv
Page 5 and 6: Foreword Structure of the documenta
Page 7 and 8: 05.01 ! ! Technical information ©
Page 9 and 10: 05.01 ! ! ! © Siemens AG 2003 All
Page 11 and 12: Table of Contents 1 Overview of the
Page 13 and 14: 05.01 02.03 5.3 Resolver control wi
Page 15 and 16: 05.01 02.03 9.5.5 Checking the star
Page 17 and 18: Overview of the Drive System 1.1 Ov
Page 19 and 20: 05.01 02.03 Control modules with an
Page 21 and 22: 05.01 1.2 Engineering steps Procedu
Page 23 and 24: System Configuration Drive group ©
Page 25 and 26: 05.01 02.03 I/R 300 mm © Siemens A
Page 27 and 28: 05.01 02.03 2.2 Ambient conditions
Page 29 and 30: 05.01 Table 2-1 Ambient conditions
Page 31 and 32: 05.01 02.03 2.4.2 Indirect position
Page 33 and 34: 05.01 2.5.1 Function of the power m
Page 35 and 36: 05.01 02.03 © Siemens AG 2003 All
Page 37 and 38: 05.01 02.03 © Siemens AG 2003 All
Page 39 and 40: 05.01 02.03 Table 2-3 Comparison ta
Page 41 and 42: 05.01 2.7 Infeed modules © Siemens
Page 43 and 44: 05.01 02.03 Pipe cooling for a 1-ti
Page 45 and 46: 05.01 2.7.3 External cooling M5 scr
Page 47 and 48: 05.01 2.7.4 Overvoltage limiting mo
Page 49 and 50: 05.01 02.03 2.8 Line supply connect
Page 51 and 52: 05.01 Connection types Example: TN-
Page 53 and 54:
05.01 IT line supply Commutating re
Page 55 and 56:
05.01 02.03 Recommendation © Sieme
Page 57 and 58:
05.01 Connection through an isolati
Page 59 and 60:
05.01 Limitation b) Please note: Ex
Page 61 and 62:
Motor Selection, Position/Speed Sen
Page 63 and 64:
05.01 02.03 © Siemens AG 2003 All
Page 65 and 66:
05.01 02.03 © Siemens AG 2003 All
Page 67 and 68:
05.01 © Siemens AG 2003 All rights
Page 69 and 70:
05.01 Main spindle control with ana
Page 71 and 72:
05.01 02.03 3.4.3 Encoder power sup
Page 73 and 74:
05.01 02.03 3.5 Overview, position
Page 75 and 76:
Page 77 and 78:
05.01 Table 3-5 Direct position sen
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
05.01 3.6.2 Connector assignment ©
Page 85 and 86:
05.01 1PH4/6/7 motor with toothed-
Page 87 and 88:
Power Modules Description ! © Siem
Page 89 and 90:
05.01 4.1 Technical data 4.1.1 Tech
Page 91 and 92:
05.01 Table 4-2 Technical data/powe
Page 93 and 94:
05.01 02.03 Table 4-4 Order No. ass
Page 95 and 96:
05.01 02.03 © Siemens AG 2003 All
Page 97 and 98:
Page 99 and 100:
05.01 02.03 © Siemens AG 2003 All
Page 101 and 102:
05.01 Table 4-11 Currents for an in
Page 103 and 104:
05.01 4.4 Interface overview Table
Page 105 and 106:
Control Modules Overview of the con
Page 107 and 108:
Page 109 and 110:
05.01 02.03 © Siemens AG 2003 All
Page 111 and 112:
05.01 5 Control Modules 5.1 Feed co
Page 113 and 114:
Page 115 and 116:
05.01 02.03 © Siemens AG 2003 All
Page 117 and 118:
05.01 5.3.1 Function overview and s
Page 119 and 120:
Page 121 and 122:
05.01 5.4.1 Select terminal functio
Page 123 and 124:
05.01 02.03 5.4.3 Interface overvie
Page 125 and 126:
05.01 5.5.1 Select terminal functio
Page 127 and 128:
05.01 02.03 © Siemens AG 2003 All
Page 129 and 130:
05.01 02.03 © Siemens AG 2003 All
Page 131 and 132:
05.01 02.03 © Siemens AG 2003 All
Page 133 and 134:
05.01 02.03 0.8 Nm DAU assignment D
Page 135 and 136:
05.01 02.03 ! © Siemens AG 2003 Al
Page 137 and 138:
05.01 BERO input X461 / X462 Table
Page 139 and 140:
05.01 02.03 Features © Siemens AG
Page 141 and 142:
05.01 02.03 5.7.1 Control module fo
Page 143 and 144:
05.01 Control module for 1 axis ©
Page 145 and 146:
05.01 02.03 Optional PROFI- BUS-DP
Page 147 and 148:
05.01 02.03 5.7.2 Description of th
Page 149 and 150:
05.01 02.03 Drive- specific termina
Page 151 and 152:
05.01 02.03 © Siemens AG 2003 All
Page 153 and 154:
05.01 02.03 Optional PROFIBUS-DP3 m
Page 155 and 156:
05.01 02.03 Table 5-24 Overview of
Page 157 and 158:
05.01 Table 5-25 Overview of the dr
Page 159 and 160:
05.01 5.9 Control module ”HLA mod
Page 161 and 162:
05.01 5.9.1 System overview Equipme
Page 163 and 164:
05.01 5.9.2 Wiring Supply connectio
Page 165 and 166:
05.01 Pressure sensor system © Sie
Page 167 and 168:
05.01 Terminals ! ! © Siemens AG 2
Page 169 and 170:
05.01 5.10 Control module ”ANA mo
Page 171 and 172:
05.01 ANA control module Measuring
Page 173 and 174:
05.01 Analog sensors 2 sensors can
Page 175 and 176:
05.01 Terminals © Siemens AG 2003
Page 177 and 178:
Infeed Modules Description UI modul
Page 179 and 180:
05.01 Electronics power supply faul
Page 181 and 182:
05.01 6.1 Function overview and set
Page 183 and 184:
05.01 Switch S1.5 Switch S1.6 © Si
Page 185 and 186:
Page 187 and 188:
05.01 6.3 Technical data Table 6-3
Page 189 and 190:
05.01 02.03 6.3.1 Technical data, l
Page 191 and 192:
05.01 02.03 © Siemens AG 2003 All
Page 193 and 194:
05.01 6.3.2 Technical data of the s
Page 195 and 196:
05.01 02.03 6.4 Interface overview
Page 197 and 198:
05.01 02.03 Table 6-7 Interface des
Page 199 and 200:
05.01 Table 6-8 Interface overview,
Page 201 and 202:
05.01 Changeover switch, parameter
Page 203 and 204:
© Siemens AG 2003 All rights reser
Page 205 and 206:
05.01 Table 6-10 Planning table for
Page 207 and 208:
05.01 02.03 Table 6-12 Configuring
Page 209 and 210:
05.01 6.6 DC link options 6.6.1 Cap
Page 211 and 212:
05.01 Distributed capacitor module
Page 213 and 214:
Page 215 and 216:
05.01 I/R PM PM P600 M600 Fig. 6-15
Page 217 and 218:
Page 219 and 220:
05.01 02.03 6.6.4 External pulsed r
Page 221 and 222:
05.01 Mounting positions © Siemens
Page 223 and 224:
05.01 02.03 UI 28 kW module Possibi
Page 225 and 226:
Line Supply Connection 7.1 Line sup
Page 227 and 228:
05.01 02.03 7 Line Supply Connectio
Page 229 and 230:
Page 231 and 232:
05.01 7 Line Supply Connection 7.1
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
05.01 02.03 switching device withou
Page 239 and 240:
05.01 02.03 Summary 7 Line Supply C
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Supplementary System Components 8.1
Page 247 and 248:
Important Circuit Information 9.1 G
Page 249 and 250:
05.01 02.03 ! 100 kΩ P600 M600 U1
Page 251 and 252:
Page 253 and 254:
05.01 02.03 Terminal L1, L2 Termina
Page 255 and 256:
05.01 Terminals 111, 113, 213 Termi
Page 257 and 258:
05.01 9.2.3 Connecting several NE m
Page 259 and 260:
05.01 02.03 © Siemens AG 2003 All
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
05.01 9.4 Drive modules 9.4.1 Block
Page 267 and 268:
05.01 Terminal 65 Terminals AS1, AS
Page 269 and 270:
05.01 02.03 9.5.2 Mode of operation
Page 271 and 272:
05.01 02.03 © Siemens AG 2003 All
Page 273 and 274:
05.01 02.03 9.5.5 Checking the star
Page 275 and 276:
05.01 02.03 Function Behavior when
Page 277 and 278:
05.01 02.03 Behavior when the prote
Page 279 and 280:
05.01 9.6.2 Function description, a
Page 281 and 282:
Page 283 and 284:
05.01 Hazard analysis and risk asse
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
05.01 02.03 Fig. 9-24 =7 External s
Page 297 and 298:
05.01 02.03 Fig. 9-26 =9 Armature s
Page 299 and 300:
05.01 02.03 © Siemens AG 2003 All
Page 301 and 302:
05.01 02.03 © Siemens AG 2003 All
Page 303 and 304:
05.01 02.03 © Siemens AG 2003 All
Page 305 and 306:
05.01 02.03 © Siemens AG 2003 All
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
05.01 ! © Siemens AG 2003 All righ
Page 315 and 316:
05.01 9 Important Circuit Informati
Page 317 and 318:
05.01 Control with SINUMERIK 810D C
Page 319 and 320:
05.01 9.10 Star-delta operation !
Page 321 and 322:
05.01 Connection diagram for Y/∆
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
05.01 9.12 Operation at power failu
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
05.01 02.03 9.12.3 DC link bufferin
Page 335 and 336:
Page 337 and 338:
05.01 Literature for Safety Integra
Page 339 and 340:
Cabinet Design and EMC 10.1 Install
Page 341 and 342:
05.01 Power cables Connecting the c
Page 343 and 344:
05.01 02.03 10.1.2 Mounting conditi
Page 345 and 346:
05.01 02.03 Air guidance, climate c
Page 347 and 348:
05.01 02.03 © Siemens AG 2003 All
Page 349 and 350:
05.01 To the NC control Fig. 10-7 C
Page 351 and 352:
05.01 02.03 © Siemens AG 2003 All
Page 353 and 354:
Connection Diagrams Fig. 11-1 Termi
Page 355 and 356:
05.01 02.03 Pulsed resistor MSD mod
Page 357 and 358:
05.01 02.03 Pulsed resistor MSD / I
Page 359 and 360:
Dimension Drawings Fig. 12-1 Intern
Page 361 and 362:
05.01 Fig. 12-1 Internal cooling, 2
Page 363 and 364:
05.01 Fig. 12-3 Pipe cooling, 1GE.4
Page 365 and 366:
05.01 Fig. 12-5 EMC measures, 2GE.4
Page 367 and 368:
05.01 Fig. 12-7 Line filter 5 kW, 4
Page 369 and 370:
05.01 Fig. 12-9 Line filter 28 kW,
Page 371 and 372:
05.01 4 5 6 7 8 1 2 3 CAD-Drawing M
Page 373 and 374:
05.01 4 5 6 7 8 1 2 3 CAD-Drawing M
Page 375 and 376:
05.01 1 2 3 4 5 6 7 8 Typen-Schild
Page 377 and 378:
05.01 1 2 3 4 5 6 7 8 Typen-Schild
Page 379 and 380:
05.01 4 5 6 7 8 1 2 3 CAD-Drawing M
Page 381 and 382:
05.01 Fig. 12-21 3-phase reactors,
Page 383 and 384:
05.01 Fig. 12-23 External cooling,
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
05.01 Fig. 12-33 Fan assembly, ext.
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
05.01 Fig. 12-39 Module, 300 mm ext
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
05.01 Fig. 12-51 External pulsed re
Page 413 and 414:
05.01 02.03 410 120 240 Cable, 6FX5
Page 415 and 416:
Page 417 and 418:
EC Declaration of Conformity © Sie
Page 419 and 420:
05.01 02.03 Attachment A to the EC
Page 421 and 422:
05.01 02.03 A10: Attachment A to th
Page 423 and 424:
Abbreviations and Terminology 611 A
Page 425 and 426:
References General documentation /N
Page 427 and 428:
05.01 02.03 c) Software /FBAN/ /FBH
Page 429 and 430:
05.01 02.03 d) Installation and sta
Page 431 and 432:
Certificates © Siemens AG 2003 All
Page 433 and 434:
05.01 02.03 Fig. D-2 Certificate of
Page 435 and 436:
Index Numbers 1-axis drive control,
Page 437 and 438:
05.01 02.03 M Main spindle drive Ma
Page 439:
To SIEMENS AG A&D MC BMS Postfach 3
Page 442:
Siemens AG Automatisierungs- und An
show all

2 - Siemens

Create successful ePaper yourself

Delete template?

Save as template?