Edition 67 (July-September, 2022)

K-BOND• 2
• Compressor
• Pre‐Pressing Lines (Heating
tunnel & Calandre)
• Cost of Climate Chamber &
Assembly Room
• Cost of Heating High Volume
and Inertia space of Autoclave.
8. Up to 40 mm. Glass thickness
processing in 1 piece or
Multi pieces independent
compositions, with trays full,
60mm on smaller glasses.
9. High temperature uniformity
process by using 96 Heating
Plates radiating over up &
down Surface of glass
10. Less space required, lines with
no calendaring are smaller
than in Autoclave systems
11. Parking station & double
platforms unit allows optimize
the process cycle times, while
half are processing in oven,
the other half are unloading
and loading for next batch,
reducing to 10 minutes process
of introduction & extraction
and restart LAM process in the
oven
12. Lamination costs don’t depend
on production level, even if
production decreases, costs
stay constant
13. High volumes of production
with minimum personnel.
PROFITABILITY PUJOL 100+
Although the production increases
or decreases, the consumption of
the New Pujol100 System is always
constant, unlike the traditional
autoclave system.
The Pujol100 System is highly
profitable for productions up to 500 sq
m per day / 11,500 sq m per month.
As Pujol PVB 100+ fully replaces
the requirement of autoclave and
able to produce both EVA lamination
and PVB lamination including sentry,
bullet proof glass, curved glass in the
same furnace with almost quality
control with less man power and least
energy requirement.
Presently, Pujol in association with
K BOND are able to installed two
Pujol-100 PVB+ machine in eastern
and southern part of India and
these machines would be ready for
production before the year 2022.
Compared to conventional
autoclave systems, Pujol 100 PVB+
high speed oven uses convention and
radiation system for both EVA and
PVB laminations with fast cycle to get
high and flexible production in lower
costs. It has the following advantages
compared to autoclave systems.
• High productivity
• Flexibility
• Low personnel requirement
• No fixed running cost
• EVA & PVB can be laminated
at the same time
Considering the above advantages of
the Pujol-100 PVB+ machine, it is
advisable to look into the option to
have such a cutting edge technology
meeting with high quality precision
and high production capacity will
always add the value to your plant and
give high return to the organization.
About K BOND
Established in 1995, K Bond
specializes in manufacturing of glass
glue (UV adhesive), glass paints and
glass lamination machinery. The
company works towards introducing
new glass technologies, research and
development, technology training,
manufacturing, and selling raw
materials for glass.
Currently, K Bond is the sole
authorized distributor of M/s Pujol for
the sale of their EVALAM Films and
highly sophisticated EVA and PVB
lamination machines across India.
The Pujol -100 PVB+ system is being
promoted in India as one of the best
products meeting the requirements of
the Indian glass industry.
Email: info@kbond.in,
hipujol@hornospujol.com
Website: www.hornospujol.com
Glass Bulletin | July - September, 2022 79