helpline - Tommee Tippee Australia

14
Everything Mattress Compatibility in the box?
Baby
• This
unit
monitor
x 1
is compatible with standard foam front cot mattresses. With thicker
Parent
mattresses(i.e.
unit x 1
spring interior) you may need to adjust the sensitivity switch inside the
Parent
battery
docking
compartment
station
on
x 1
the baby unit (14) from its pre-set 'medium' position to the
Parent
'high'
unit
position.
belt clip/stand
With some
x
very
1
thin mattresses you may need to change the sensitivity
Movement
setting to
sensor
'low'.
pad x 1
Mains adaptors x 2
Instruction Booklet x 1
18
VERY IMPORTANT: DO NOT increase or decrease sensitivity unless false
alarms are occurring and you have followed and eliminated the advice in
the problem solving section on page 15.
baby unit
sensor pad
Using Tommee 1 Tippee Reassurance Monitors abroad
20
• Baby monitors purchased in Australia and NZ are licensed for use in the Australia and
NZ only.
3
• Although it may work in foreign countries, its use may be illegal and the receiver may
suffer severe interference in some countries.
2
17
18
GENERAL SAFETY INFORMATION
8 7
• Make 9
6 sure you store your monitor in a safe place when not in use, away from heat and
5 water.
10
• Take care not to drop either unit as this may affect the functioning of your monitor.
4
back
11
12
14
helpline
15 16
base
13 13
battery cover
If you are having any problems in setting up your monitor or
require any further information please contact our helpline on:
(AUS)1800 890 011 or (NZ)0800 877 876
19