NEW PRODUCTS OCTOBER

NEW PRODUCTS | OCTOBER 2022 NEW PRODUCTS | OCTOBER 2022
921525
Sportster S and Nightster Front Pulley Cover
Our design cover for the front belt pulley provides a classy black
cut look. The short timing belt guard is included in the kit.
• Machined aluminium
• Cover rotates with
923639 Fitment: 21-22 Sportster S RH1250S , 22 Sportster
Nightster RH975, Color: Black Cut, Material: Billet
Aluminium, Unit: Kit
921526
Belt Guard
The belt guards from Cult-Werk comes in black powder coated
versions. Cool and lean look for your bike and not boring like
the OEM counterpart. CNC-machined on the most modern 5-axis
CNC machining centers!
Fitment: 19-21 Scout Bobber, 21 Scout Bobber Twenty,
22 Scout Bobber , 22 Scout Bobber Twenty , Color: Black,
Finish: Powder Coated, Material: Aluminium
PART# DESCRIPTION UNIT
921525 Upper Guard Each
921526 Lower Guard Each
Upper Fork Cover
• Billet aluminum upper fork covers
• Grooved or plain versions available
Part#: 923626, Fitment: 22 Sportster Nightster RH975,
Color: Black, Position: Upper, Material: Billet Aluminium,
Unit: Pair
Mid Version 6-Piece Fork Covers
Complete 6-piece fork cover kit „Mid Version“ in black with
the lower covers made of aluminum or with bellows suitable
for Indian ® Scout Bobber models from 2018. With this kit
from Cult-Werk you cover the fork tubes above, between and
below the fork bridges if the original turn signal brackets exist!
This covers the fork tubes and the entire fork appears bulkier
and completely black! This fork cover kit can be used with the
Original Equipment front fender or custom fenders.
The individual covers are attached using concealed grub screws
and thus center themselves on the fork tubes. This ensures that
the cover is held securely. To ensure that the gaps between the
covers and the triple clamps are exactly parallel, the covers have
been provided with the same bevels as the triple clamps.
Our covers are made of high-quality aluminum and are milled
on the most modern 5-axis machining centers and then powdercoated
in glossy black. This guarantees the highest quality! The
assembly is very simple, the upper and the lower cover are only
pushed over the fork tube and screwed tight. On the inside of
the lower cover there is a cut-out for clearance on the fender
and is therefore hardly visible.
Fitment: 19-21 Scout Bobber, 22 Scout Bobber , Color:
Gloss Black, Finish: Powder Coated, Position: Front,
Material: Aluminium, Unit: Kit
Mid Version 6-Piece Fork Covers with Rubbers
Complete 6-piece fork cover kit „Mid Version“ in black with
the lower covers made of aluminum or with bellows suitable
for Indian ® Scout Bobber models from 2018. With this kit
from Cult-Werk you cover the fork tubes above, between and
below the fork bridges if the original turn signal brackets exist!
This covers the fork tubes and the entire fork appears bulkier
and completely black! This fork cover kit can be used with the
Original Equipment front fender or custom fenders.
PART# FITMENT NOTE DESCRIPTION
921541 With original Turn
Signals and Brackets.
Middle Version without
Cult-Werk Logo
921543 With original Turn Signal
Brackets.
Middle Version with Cult-
Werk Logo
The individual covers are attached using concealed grub screws
and thus center themselves on the fork tubes. This ensures that
the cover is held securely. To ensure that the gaps between the
covers and the triple clamps are exactly parallel, the covers have
been provided with the same bevels as the triple clamps.
SP-S Alternator Cover
• CNC milled aluminum
• Black anodized
• In Thunderbike SP-S design
923643 Fitment: 21-22 Sportster S RH1250S , 22 Sportster
Nightster RH975, Color: Black, Finish: Anodized, Unit:
Each
Sportster S Belt Guard
The Thunderbike belt protection ensures a visually perfect cover
of the drive belt.
• Material: aluminum
• Black Matt
• Installation instructions / manual (DE/EN)
923629 Fitment: 21-22 Sportster S RH1250S , Color: Flat Black,
Finish: Powder Coated, Unit: Each
Our covers are made of high-quality aluminum and are milled
on the most modern 5-axis machining centers and then powdercoated
in glossy black. This guarantees the highest quality! The
assembly is very simple, the upper and the lower cover are only
pushed over the fork tube and screwed tight. On the inside of
the lower cover there is a cut-out for clearance on the fender
and is therefore hardly visible.
Fitment: 19-21 Scout Bobber, 22 Scout Bobber , Fitment
Note: With original Turn Signal Brackets., Color: Gloss
Black, Finish: Powder Coated, Position: Front, Material:
Aluminium, Rubber, Unit: Kit
PART# DESCRIPTION
921542 Middle Version without Cult-Werk Logo
921544 Middle Version with Cult-Werk Logo
Front Axle Cover
• CNC machined alu
• Sold as pair
• Black matte finish
• Manual (DE/EN)
Color: Black, Finish: Powder Coated, Position: Front,
Material: Aluminium, Unit: Pair
PART#
FITMENT
923631 21-22 Sportster S RH1250S
923616 22 Sportster Nightster RH975
10 for more details check www.custom-chrome-europe.com
for more details check www.custom-chrome-europe.com
11