NEW PRODUCTS OCTOBER

NEW PRODUCTS | OCTOBER 2022 NEW PRODUCTS | OCTOBER 2022
Jetstream and Jetstream DF LED Sequential Lighting Turn Signals and 3 in 1 Turn Signal
The Kellermann Jetstream® is probably the most spectacular motorcycle indicator ever build. The shape is extremely aerodynamic
and therefore also at high speeds very streamlined.
No other motorcycle indicator with sequential lighting and ECE approval gets even close, the brightness of the Kellermann
Jetstream® is unmatched.
Especially overtaking becomes safer as the vehicle ahead is strongly warned by the extreme illuminating power, the danger of
inadvertently change of lanes is reduced.
• Highest illuminating power
• Kellermann high power LED technology
• State-of-art „IC“- chip technology
• 32 MHz real time micro processor controlled
• Silent-Current, advanced Power Saving algorithm
• High measure of visibility across a wide angle range
• Longlife Protection Guard®
• Suitable for 12 volt DC applications
• Flow-optimized metal housing, high quality manufacturing
• M8 x 20mm thread
• High-quality vibration-absorbing bearing
• Global design protection
Color: Black, Glass Color: Clear, Certification: ECE-Approved, Lighting Type: LED, Unit: Each
PART# POSITION TYPE
922807 Front, Rear, Left, Right Indicator front and rear
922808 Rear, Left, Right 3 in 1 Indicator rear
Shorty LED Turn Signals/Taillight/Brake Light
with Bracket
The small holder in which the LED 3in1 lighting incl. E-mark is
located was milled from an aluminum part and then powdercoated
in matt black with structure (to match the frame). The
new Cult-Werk icon was milled into the holder to round off the
set optically perfectly! The lighting unit is simply replaced with
the original version!
921530 Fitment: 19-21 Scout Bobber, 21 Scout Bobber Twenty,
22 Scout Bobber , 22 Scout Bobber Twenty , Color:
Black, Glass Color: Smoke, Certification: E-Approved,
Lighting Type: LED, Unit: Set
Strut Stripe Turn Signal/Taillight/Brake Light
Original Thunderbike indicator set for the Nightster RH975 with
original struts.
• 3 in 1 indicator with rear light and brake light
• Modern LED technology
• E-mark
• Sold in pairs
923620 Fitment: 22 Sportster Nightster RH975, Color: Black,
Glass Color: Tinted, Certification: E-Approved, Lighting
Type: LED, Unit: Pair
Nano 3 in 1 LED Lightbar with LED Turn
Signals, Brake- and Taillight
The perfect rear conversion is guaranteed with the new 3in1
Lightbar from HeinzBikes! Inconspicuous at the rear, it hides
the large original turn signals and taillights and when in use,
the light units convince with furious brightness and laser-like
luminosity. State-of-the-art lighting technology in a minimal
size, which is smaller than a cent piece. It is mounted directly
under the rear fender without the use of adapters or similar
accessories. Precision machined billet aluminum with a black
powder coat finish. The indicators and taillights are connected
directly to 12V without resistors. In combination with the new
SIDE MOUNT license plate holder, the rear of the Sportster S will
shine in a complete look.
• The lighting units are E-approved
• Protected design
923608 Fitment: 21-22 Sportster S RH1250S , Color:
Black, Finish: Powder Coated, Glass Color: Tinted,
Certification: E-Approved, Lighting Type: LED, Unit: Kit
Sportster S Handlebar Side Mount Turn Signals
Rick’s Motorcycles manufactures Sportster S model fitting handlebar-tip turn signals which offer a super-clean look and are almost
invisible! Manufactured from high-grade aluminum the CNC-machined brackets hide the cables inside the handlebar tube. Indicators
are Atto Integral by Kellermann, fixed inside the housing. With ECE approval these indicators are street legal and can be used all
over Europe.
921456 Fitment: 21-22 Sportster S RH1250S , Color: Black, Finish: Powder Coated, Glass Color: Clear, Bezel Color: Black,
Certification: E-Approved, Lighting Type: LED, Unit: Pair, Qty.: 1.0
Round LED License Plate Light
• Round plastic housing
• Clear lens
• LED
• Dimensions: Diameter: 13 mm, Length: 16 mm
• Threated stud: M6 x 15 mm
Glass Color: Clear, Certification: E-Approved, Diameter
mm: 13.0mm, Lighting Type: LED, Unit: Each
PART# COLOR
923849 Black
923850 Chrome
Crumb LED Turn Signal
• Super small
• Black plastic housing
• Slightly tinted glass
• Powerful LED technology
• Front and/or rear installation
• Total width without thread 24,5mm
• Light unit dimensions 16x11x10,5mm (WxHxD)
923851 Fitment Note: E-marked as rear indicator only.,
Color: Black, Glass Color: Light Smoke, Certification:
E-Approved, Diameter mm: 16.0mm, Lighting Type:
LED, Unit: Pair
Gauge Mount for Clubstyle Riser
If you have a new Softail M8 model, then this bracket is what
you need. The lightweight aluminum housing completely
encloses your digital speedometer and creates a clean, custom
look. In combination with the HeinzBikes Clubstyle handlebar
risers, you can attach the speedometer exactly where it suits you
best. The speedometer holder is simply clamped between the
two bars of the risers.
• High quality billet aluminum, CNC machined
• Available in black powder coated or silver anodized
• Easy assembly in minutes
• Multiple mounting options in height
• Suitable for all HeinzBikes handlebar risers
• Premium Quality - German Made
• Approved
• Including GTÜ parts certificate
Fitment: 18-19 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX,
18-20 FXBB, 20-22 FXST, 21-22 FXBBS, 21-22 FXBRS, Fitment
Note: Fits only 2018-up HD with digital HD Speedo ,
Certification: E-Approved, Unit: Kit
PART# COLOR FINISH
923789 Gloss Black Powder Coated
923790 Silver Anodized
6 for more details check www.custom-chrome-europe.com
for more details check www.custom-chrome-europe.com
7