SIEMOSYN Motors 1FU8 SINAMICS SIMOVERT MASTERDRIVES ...

Motor Description
1.4 Rating plate data
1.4 Rating plate data
1FU8/1-20
The motors are designed for a constant torque range within a defined frequency
range.
The rating plate can specify the following frequency ranges depending on the motor
design and how it was ordered:
� M = const. for 13.3 Hz up to fmax for 4-pole motors or
� M = const. for 20 Hz up to fmax for 2, 4 and 6-pole motors
(The frequency range 13.3 Hz up to fmax has been conceived as replacement for
the old 6-pole motor series.)
The following example involves the same motor, however, stamped for the specified
frequency ranges with different constant torques for the speed range.
A voltage boost at low frequencies has already been taken into account in the data
stamped on the rating plate.
Table rating plate for 13 Hz
1FU8080-4TA6 with fmin = 13 Hz to fmax = 100 Hz
SIEMENS
3~mot. 1) 1FU8080-4TA60 2)
E 0107/471101 14 002 4) H
IEC/EN 60034 5) 3)
D–91056 Erlangen 10kg 6) IM B3 7) 80M 8) IP55 9) Th.Cl.F 10)
6004/6004 14)
Hz 13) V 12) kW 11) A 11) cos ϕ 11) /min 11) Nm 11)
13 72 Y 0.1 1.85 0.83 390 2.5
50 200 Y 0.38 1.75 0.80 1500 2.5
100 400 Y 0.78 1.82 0.73 3000 2.5
1) Motor type: Three-phase motor
2) Order No. (MLFB)
3) Half-key balancing
4) Serial number
5) Standard
6) Weight
7) Type of construction
8) Frame size
9) Degree of protection
10) Temperature class
11) Motor data
12) Voltage
13) Frequency
14) Bearing size DE/NDE
09.03
© Siemens AG, 2003. All rights reserved
SIEMOSYN Motors, 1FU8 (PFU) – 09.03 Edition