Manual-reparaciones-MT-X 1841A-español (1)

648943ES
3
CÓMO UTILIZAR EL MANUAL DE REPARACIÓN?
1 2
GENERAL, CHARACTERISTICS AND SAFETY
00
GENERAL, CHARACTERISTICS AND SAFETY
00
ENGINE
10
- GENERAL INSTRUCTIONS AND SAFETY NOTICE
TRANSMISSION
20
AXLE
30
BRAKE
40
BOOM
50
HYDRAULIC
70
ELECTRIC
80
DRIVER’S CAB
85
FRAME - BODY
OPTIONS - ATTACHMENTS
90 110 90
3
4
GENERAL INSTRUCTIONS AND SAFETY
NOTICE
00
00 400
RULES FOR MAINTENANCE
Do not carry out any work on the machine unless you have followed
a suitable training course and have the knowledge required for it.
GENERAL INSTRUCTIONS AND SAFETY NOTICE
Make sure you have taken into consideration all the indicator plates
on the machine and in the instruction manual.
pages
Be careful not to burn yourself when touching hot liquids or parts
when operations have to be done before the machine has had
time to cool down.
PREAMBLE ........................................................................2
MAINTENANCE POSITION .........................................................3
RULES FOR MAINTENANCE ........................................................4
1
2
Before carrying out any operation on an electrically powered
component, activate the battery cut-off.
If the telehandler does not have a battery isolation device, disconnect
the battery connecters then re-assemble them.
Before carrying out any welding operations, think about
disconnecting computers.
ECU
A machine operating in a contaminated environment should be
specifically equipped. Moreover, local safety notices deal with
maintenance and repair work on such machines.
(29/09/2011) 00-M173EN
00-M173EN
(29/09/2011)
MR
547982 : Véase el manual de reparación N° 547982.
70 - HIDRÁULICO : Véase el grupo N° 70 llamado «Hidráulico».