2004_Marzocchi_Bomber_Owners_Manual_EN

Adjustments
5.1.2 Spring preload with internal
adjustment
NOTE
The fork is set to the minimum preload by the
manufacturer, i.e. the adjuster is completely
turned counterclockwise. However, the spring is
slightly preloaded to help counteractining static
load.
A
English
5
130
To adjust the initial setting according to the
rider’s weight and needs, you will have to
remove the plastic protection cap (A) and turn
the adjuster (B), using a 4 mm Allen key.
• By turning the adjsuter clockwise, the preload
spring can be increased up to the maximum
value.
• By turning the adjuster counterclockwise, you
will reduce the preload spring down to the
minimum value.
MZ010012
MZ009_1
4 mm
Once the adjustment completed put the plastic
protection cap (A) back to its seat.
ATTENTION
Do not force the adjuster past its limits (B).
B
MZ009034