Thermostatic cartridge for incorporation – CP7 - Watts Industries

EN1111
ASSE1016
Thermostatic cartridge
for incorporation – CP7
• Outstanding reliability.
• Anti-scalding safety.
• Compliance with EN1111 (EU) & ASSE 1016 (USA).
• Anti-limescale with polymer body (PSU).
• Light weight.
• 100% factory tested.
• Can be preset at a specific temperature.
• Standard control shaft notching (Iserlohn Germany type).

dimensions :
ThermosTaTiC CarTridge for inCorPoraTion – CP7
materials :
description material
Shell PSU
Yoke POM
Wax motor Vernet
O-rings EPDM
Filters Stainless steel
application :
The CP7 is a thermoplastic cartridge, the latest of a long series of thermo-plastic
cartridges derived from experience over more than 60 years.
Specifically designed for incorporation, the CP7 offers you the best temperature
regulation and flow capacity with one single geometry.
features and benefits :
- outstanding reliability : more than hundred thousands cartridges are used since
decades
- anti-scalding safety & regulation : compliance with EN1111 (EU) & ASSE 1016 (USA)
- anti-limescale with polymer body (PSU) : no risk of blockage due to scale
- light weight : CP7 is held against the body tap, by a rugged nut of brass with an “above water” thread so that
disassembly is particularly easy, even for non-professionnals (servicing or replacement)
- 100% factory tested : easy integration for the manufacturer/fitter without use of a thermal test rig
- can be preset at a specific temperature : outstanding customer service, product widely distributed across Europe
- standard control shaft notching (Iserlohn Germany type) : can receive directly without adaptation a great number
of knobs already used by tap manufacturers
- market background and know-how : quality standard ensured by the first European specialist in sanitary thermostatics
since 1947, production ISO 9001 certified
specifications :
• Maximum operating pressure : 10 bars.
• Maximum hot water temperature : 85°C.
• Minimum difference between inlet temperatures : 5°C.
• Maximum differential pressure between inlet pressures : 1,5 bar (dynamic).
• Minimum operating pressure : 1 bar.
• Recommended operating pressure : 2 – 4 bars.
• Regulation and safety in accordance with EN1111 & ASSE1016.
• Medium : water.
• Standard temperature range : 15-50°C.
• Specific temperatures ranges are available upon request.
• Control shaft with square shape is available upon request.
Ref. code : 107857L
Ø32.3
Ø31.3
Ø28
1 x O’ring Ø25.12 x Ø1.78
34.
3
18.
4
3.
9
2 x O’ring Ø28.3 x Ø1.78
94
Ø36.5
36.
6
55
Notching 28 teeth Ø10,7
Notching 20 teeth Ø7,6
internal dimensions for incorporation :
upon request
Ref. code : 107859L
flowrates :
pressure flowrates
1 bar 21 l/min
1,5 bar 25 l/min
2 bars 30 l/min
2,5 bars 34 l/min
3 bars 36 l/min
The photographs, illustrations and descriptions contained in this brochure are given for information only.
Watts Industries reserves the right to change the technical specifications or the design of these products without prior notice.
Ø32.3
D
Ø31.3
Ø 28
1 x O’ring Ø25.12 x Ø1.78
34.
3
18.
4
2 x O’ring Ø28.3 x Ø1.78
WATTS INDUSTRIES France
1590 avenue d'Orange CS 10101 SORGUES
84275 VEDENE cedex - FRANCE
Tel. +33 (0)4 90 33 28 28 - Fax +33 (0)4 90 33 28 29/39
www.wattsindustries.com
E-mail : info@wattsindustries.fr
3.
9
94
Ø 36.5
36.
6
55
Notching 28 teeth Ø10,7
Notching 20 teeth Ø9,2
Re-order no. 69(33)-UK-12/11