Tira vibration test systems - Swissvacuum.com

TIRA Slip Tables
TIRA slip tables
TESTING UNDER STRESS
Today's equipment has to work in all kinds of environments including
changes of temperature, vibration, and high humidity.
From the design stage right through to final inspection, combined
vibration/climatic test systems can simulate the effect of ambient
conditions on electric, electronic and mechanical components.
Weak points can thus be detected at an early point and eliminated
at low cost. Properly designed key parts will prevent
expensive downtimes and/or damage. Such multi-test systems are
indispensable for quality assurance, research and development.
DRIVER BARS
TIRA driver bars provide the link between shaker and slip plate.
They are FEM designed and made of magnesium. Depending on
size they are single pieces or welded together. Their geometric
design enables perfect force transmission while minimizing the
moving mass.
• Driver bars for vibration generators with armature diameter of
120 mm
• Driver bars for vibration generators with armature diameter of
220 mm
• Driver bars for vibration generators with armature diameter
from 340 - 640 mm
Our test systems guarantee your product functions
VIBRATION ISOLATION, SAFE INSTALLATION
Pneumatic isolation elements makes it possible to install slip tables
without expensive foundations. Due to the low natural frequency
of isolators (3 - 5 Hz), a wide test spectrum is applicable.
TEST OBJECT FIXING
To simulate practical conditions, devices under test have to be
excited in their working position. and TIRA has specific magnesium
fixtures for all applications.
16