solar restore bst manual.indd - Accessory Power
solar restore bst manual.indd - Accessory Power
solar restore bst manual.indd - Accessory Power
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Operating Instructions continued:<br />
USB Charging<br />
The Solar ReStore BST battery pack can be charged by USB port using the<br />
(b) MicroUSB charging cable.<br />
1 - Move the (3) Control switch to the OFF position.<br />
2 - Connect the small end of the (b) MicroUSB charging cable to the (7) IN port on<br />
the side of the Solar ReStore BST. Connect the other end of the (b) MicroUSB<br />
charging cable into a USB port to begin charging.<br />
3 - The (4) Status LED will glow red to indicate charging. The 1500mAh internal<br />
backup battery will take about 5 hours to fully charge.<br />
4 - The battery status can be checked by pressing the (8) CHECK button located<br />
below the (6) Capacity indicator. The (6) Capacity indicator display will light up<br />
with blue LEDs to indicate the level of charge.<br />
Charging Your Mobile Device<br />
The Solar ReStore BST is designed with a 1500mAh internal backup battery.<br />
Many mobile devices can charge with the included (c) MiniUSB and (b) MicroUSB<br />
charging cables.<br />
1 - Choose the charging cable which is appropriate for you, and connect the small<br />
end into your mobile device. Next, connect the other end of the charging<br />
cable into the (2) OUT port on the Solar ReStore BST.<br />
2 - Slide the (3) Control switch to the ON position to begin charging your device.<br />
You will see the (4) Status LED glow blue to indicate power fl ow to your device.<br />
3 - The (2) OUT port allows you to charge mobile devices such as iPod®, iPhone®,<br />
Zune®, Samsung® phones and other devices which require special proprietary<br />
OEM cables. Simply connect your OEM USB cable to your device and the Solar<br />
ReStore BST as described in the steps above.
Change language