Filters and Filter Silencers - Universal

More documents

Recommendations

Info

ILFV Series Vacuum Service In-line Air Filters Universal’s new ILFV Series of in-line air filters are designed especially for vacuum applications as an economical alternative to our ILF Series. Choose from ten standard pipe sizes ranging from 2” to 14” and flow capacities ranging from 120 to 5,900 CFM. Two choices of filter element media— pleated paper or pleated felt—are available to suit your specific application. Model ILFV-2 ILFV-2¹⁄₂ ILFV-3 ILFV-4 ILFV-5 ILFV-6 ILFV-8 ILFV-10 ILFV-12 Part Number 34-D02-TT* 34-D25-TT* 34-D03-TT* 34-D04-TT* 34-D05-AA* 34-D06-AA* 34-D08-AA* 34-D10-AA* 34-D12-AA* P (nom.) 2 2.5 3 4 5 6 8 10 12 Universal’s Filter Restriction Gauge provides a convenient, accurate means of monitoring filter pressure drop as the filter element becomes increasingly loaded with dirt. In-line air filters are standard with threaded connections for directly mounting the gauge. See p. 9.15 for a complete description. 14 14 14 14 18 18 24 24 30 ILFV-14 34-D14-AA* 14 30 30.75 3.5 17 15 18 205 5,900 All models have a .125" FNPT tap for installation of a gauge or manometer to monitor pressure drop. The C dimension is clearance required to remove elements. Non-ASME code construction is suitable for 15" Hg vacuum. Not applicable for pressure applications. Rated capacity is based upon flow velocity of approximately 5500 ft/min. If pressure drop allowance permits, capacity may be increased by as much as 50%. Flange connections are drilled per ANSI standard for each size. Sizes 2" through 4" are standard with male pipe threaded inlet and outlet fitting (MNPT). Sizes 5" through 14" are standard with plate flanges drilled to ANSI standards (dashed lines on sketch). Weight does not include filter elements. Refer to page 14 for filter element details. *Specify “P” at the end of part number for paper element or “F” for synthetic felt. © 2011 Universal Acoustic & Emission Technologies, Inc. All rights reserved. D L 9.5 9.5 9.5 9.5 12 20.5 13.25 22.75 17.25 N 14 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 Y 6.5 6.5 6.5 6.5 7.75 12 8.25 13 10.25 C 7 7 7 7 10 10 11 11 15 Filter Elements Pleated paper elements offer the highest efficiency and are considered “standard” for the ILFV series units. Pleated felt elements are also available for less demanding service. Both element types are completely interchangeable and will fit in any ILFV housing. K 10 10 10 10 12 12 15 15 18 Weight (est.) 18 19 20 21 50 65 90 125 160 Rated Cap. (CFM) 120 190 275 500 750 1,100 2,200 3,000 4,300 Toll-Free: 1-888-300-4272 www.universalAET.com 94-1553 Rev 0
ILF/ILFS Series ILFV Series 81-0323 P Replacement Element Part Number (nom.) Paper Felt Wire Mesh 3 4 5 6 8 10 12 14 16 18 P (nom.) 2 2¹⁄₂ 3 4 5 6 8 10 12 14 81-1063 81-1063 81-1063 81-0475 81-0475 (2) 81-1163 81-1163 81-1164 81-1164 81-1164 81-1063 81-1063 81-1063 81-1063 81-0475 81-0475 (2) 81-1163 81-1163 (2) 81-1164 81-1164 (2) Oil Free Adhesive This is an oil-free product developed for use on viscous impingement type filters. It is a substitute for applications that do not permit oil wetting of the filter elements, such as oil-free compressors. Universal Oil-Free Adhesive is available in 13 oz. aerosol spray cans. © 2011 Universal Acoustic & Emission Technologies, Inc. All rights reserved. Paper Replacement Element Part Number Felt Wire Mesh 15 81-1205 81-1205 81-1205 81-1207 81-1207 (2) 81-1209 81-1209 81-1210 81-1210 81-1210 81-1205 81-1205 81-1205 81-1205 81-1207 81-1207 (2) 81-1209 81-1209 (2) 81-1210 81-1210 (2) 81-1234 Filter Elements 81-1038 81-1038 81-1038 81-1040 81-1040 (2) 81-1200 81-1200 81-1201 81-1201 81-1201 — — — — — — — — — — Filter Restriction Gauge The Filter Restriction Gauge provides a convenient, accurate means of monitoring filter pressure drops as the filter element becomes increasingly loaded with dirt. Cartridge Filters and Filter silencers are standard with threaded connections for direct mounting of the gauge. Toll-Free: 1-888-300-4272 www.universalAET.com 94-1553 Rev 0
Page 1: Filters and Filter Silencers Techni
Page 4 and 5: For centrifugal compressors, blower
Page 6 and 7: For centrifugal compressors, blower
Page 8 and 9: Filter and silencer combined in one
Page 10 and 11: P-8 Series Prefilter P-12F Series F
Page 12 and 13: CCS/CS Series Filter-Silencers CCF/
Page 14 and 15: CCS/CS/CCF/CF Filter Elements Pleat
Page 18: Universal 1925 Highway 51/138 P.O.

Filters and Filter Silencers - Universal

Create successful ePaper yourself

Delete template?

Save as template?