You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>STR</strong>-<strong>KG800</strong><br />
FM AUTO STOP CHECK<br />
signal<br />
generator<br />
14<br />
set<br />
Procedure:<br />
1. Turn on the set.<br />
2. Input the following signal from signal generator to FM antenna<br />
input directly.<br />
Carrier frequency: A = 87.5 MHz, B = 98 MHz, C = 108 MHz<br />
Deviation : 75 kHz<br />
Modulation : 1 kHz<br />
ANT input : 1 kHz<br />
Note: Use 75 ohm coaxial cable to connect signal generator and the set.<br />
You cannot use video cable for checking.<br />
Use signal generator whose output impedance is 75 ohm.<br />
3. Set to FM tuner function and scan the input FM signal with<br />
automatic scanning.<br />
4. Confi rm that input frequency of A, B and C are detected and<br />
automatic scanning stops.<br />
When the station signal is received in good condition, automatic<br />
scanning stops.<br />
SECTION 5<br />
ELECTRICAL CHECK
Change language