NO - BTicino - Online Catalog

Safety
Burglar alarm system
Equipped with sensitive IR detectors and magnetic
contacts, the Burglar alarm is an effective and safe
protection system for assets and people because it is
able to detect the presence of trespassers by means
of audible, luminous and telephone alarms.
All the devices that are part of the system are
connected in parallel with only two wires and are
made up of a telephone pair which distributes the
power supply, thus carrying the information among
the devices. The use of only one remote control and
of transponder keys coded automatically between
millions of combinations as well as the possibility of
dividing the house up to 8 independent zones makes
Power supply
230V a.c.
Telephone
line
Remote control
control unit with telephone
dialling device
Sheathed telephone pair
Connector
Swivel
IR detector
the system very simple and fl exible. It is therefore
possible, for instance, to protect rooms by activating
the perimeter zones (doors and windows) and, at the
same time, to move around the house freely.
Using the unit with the Telephone dialling device
enables you to transfer the alarm signals to the
telephone line, thus notifying the stored telephone
numbers with voice messages and allowing you to
know the system status through access codes.
It is possible to connect a radio receiver to the wire
system to integrate Burglar alarm radio devices
which can be used for protecting zones which are not
set up for wire cabling. See MY HOME Burglar alarm
Guide for more details.
Contact interface
IR wall-mounted
mini-detector
Tamper line
Contact line
Radio
receiver
To other devices
External siren
Volumetric
radio
detector
Perimeter
radio
detector
GENERAL FEATURES 23
MY HOME GUIDE GUIDELINES