Measurement Engineering for Air Conditioning and ... - Bad Request

More documents

Recommendations

Info

10 Accessories Accessories for measuring instrument/probes Part no. Printer and Accessories Part no. Funnel set consisting of funnel for disc outlets (Ø 200) and funnel for ventilator (330 x 330 mm) for in- and outgoing air Plug-in mains adapter, 5 VDC 500 mA with European adapter, 100-250 VAC, 50-60 Hz Connection hose, silicone, 5m long, max. load 700 hPa (mbar) 0554 0440 Handle for attachable humidity probe head for connection to testo 635, incl. probe wire, for measurement / calibration of humidity probe head testo saline pots for control and humidity adjustment of humidity probes, 11.3 %RH and 75.3 %RH with adapter for humidity probe Sintered PTFE filter, Ø 12 mm, for corrosive media, High humidity range (long-term measurements), high flow velocities. Stainless steel sintered filter, pore size 100 µm, probe protection in dusty atmospheres or at higher flow speeds, for measurements at higher flow velocities or in contaminated air Lithium battery button cell, CR2032 AA batteries for radio handle 0554 0447 0430 9735 0554 0660 0554 0756 0554 0647 0515 0028 Adhesive material for fixing and sealing 0554 0761 System case Part no. Service case for basic equipment of measuring instrument and probes, dimensions: 400 x 310 x 96 mm Service case for measuring instrument, probe and accessories, dimensions 520 x 380 x 120 mm 0563 4170 0516 0035 0516 0435 Testo fast printer with wireless infrared interface, 1 roll thermal paper and 4 AA batteries, for printing out measurements on site 0554 0549 Spare thermal paper for printer (6 rolls), permanent ink, measurement data documentation legible for up to 10 years 0554 0568 Spare thermal paper for printer (6 rolls) 0554 0569 External fast charger for 1-4 AA rech. batteries, incl. 4 Ni-MH rech. batteries with individual cell charging and charge control display, 0554 0610 incl. impulse trickle charging, integrated discharge function, with built-in international mains plug, 100-240 V, 300 mA, 50/60 Hz Calibration Certificates Part no. ISO calibration certificate/temperature, meas. instr. with surface probe; calibration points +60°C; +120°C; +180°C ISO calibration certificate humidity, Calibration points 11.3 %RH and 75.3 %RH at +25°C ISO calibration certificate/pressure, differential pressure, accuracy 0.1 to 0.6 (% of fsv) ISO calibration certificate velocity, hot wire, vane anemometer; calibration points 0.5; 0.8; 1; 1.5 m/s ISO calibration certificate velocity, hot wire, vane anemometer, Pitot tube; calibration points 1; 2; 5; 10 m/s ISO calibration certificate/Velocity, hot wire, vane anemometer, Pitot tube; calibration points 5; 10; 15; 20 m/s ISO calibration certificate/light, Calibration points 0;500;1000;2000;4000 Lux ISO calibration certificate/CO2, CO2 probes; calibration points 0; 1000; 5000 ppm 0520 0071 0520 0006 0520 0025 0520 0024 0520 0004 0520 0034 0520 0010 0520 0033
Measure U-value and flow using testo 435 Using testo 435-2 and testo 435- 4, the U-value (the most important value when assessing heat in components, formerly known as K-value) and even the smallest air currents, such as at leaking windows, can be measured reliably. Three temperature values are needed to calculate the U-value: outer temperature, surface temperature of the inner wall and the ambient air temperature. The outer temperature can be measured quickly and easily, with the window closed, using the new wireless probes. The probe is simply positioned outside and transmits the values wirelessly to the measuring instrument inside. The two other temperatures required can be measured using only one probe; the new patented U-value probe. To measure the surface temperature, the three wires of the U-value probe are attached to the inner wall using modelling clay. The air temperature is measured by a sensor on the probe plug. The three temperatures needed are determined by the connected temperature probes and transferred to the testo 435. The instrument calculates the U-value from them and shows it directly in the display. Detection of tiny air currents such as at leaking windows and sockets is also possible using testo 435 together with a thermal measurement probe. The accurate hot-wire probe reliably detects even the tiniest air flows. Air temperature and air moisture can be measured using testo 435-2 and testo 435-4. With a securely attached probe or with a wireless probe. Measuring the U-value at a wall in need of repair with a U-value and wireless temperature/humidity probe (also possible with a temperature probe) Measuring flow at a leaking window Recommended sets Part no. testo 435-2, multi-functional measuring instrument for A/C, ventilation and Indoor Air Quality with readings memory, PC software and USB data transmission cable, incl. battery and calibration protocol testo 435-4, multi-functional meas. instr. with built-in differential pressure measurement for A/C, ventilation and Indoor Air Quality with readings memory, PC software and USB data transmission cable, with battery and calibration protocol Recommended set for measuring U-value Radio module for measuring instrument, 869.85 MHz, approval for the countries: DE, FR, UK, BE, NL, ES, IT, SE, AT, DK, FI, HU, CZ, PL, GR, CH, PT, SI, MT, CY, SK, LU, EE, LT, IE, LV, NO Radio immersion/penetration probe, NTC, approval for the countries: DE, FR, UK, BE, NL, ES, IT, SE, AT, DK, FI, HU, CZ, PL, GR, CH, PT, SI, MT, CY, SK, LU, EE, LT, IE, LV, NO or alternatively Radio handle for plug-in probe heads, incl. T/C adapter, approval for the countries: DE, FR, UK, BE, NL, ES, IT, SE, AT, DK, FI, HU, CZ, PL, GR, CH, PT, SI, MT, CY, SK, LU, EE, LT, IE, LV, NO 0554 0188 0613 1001 0554 0189 Humidity probe head, attachable to radio handle 0636 9736 Temperature probe to determine U-value, triple sensor system for measuring wall temperature, modelling clay included Service case for basic equipment of measuring instrument and probes, dimensions: 400 x 310 x 96 mm 0614 1635 0516 0035 Recommended set for measuring flow 0563 4352 0563 4354 Hot wire probe for m/s and °C, Ø probe head 7.5 mm, with telescopic handle (max. 820 mm) Recommended set for temperature/humidity measurement Humidity/temperature probe or wireless with versatile handle and humidity probe head (See Uvalue measurement for Ordering data) 0635 1025 0636 9735 11
Page 1 and 2: Committing to the future 2011 Measu
Page 3 and 4: Learning changes What was the diffe
Page 5 and 6: instrument for every task Reference
Page 7 and 8: testo 435 - The new all-rounder The
Page 9: Probes / Option: Radio 435-2/-4 IAQ
Page 13 and 14: Flow probes Illustration Meas. rang
Page 15 and 16: The pro set for comfort level measu
Page 17 and 18: On site test procedure to DIN EN 14
Page 19 and 20: Compact Vane Anemometer testo 416 T
Page 21 and 22: Notes 21
Page 23 and 24: Pressure and flow velocity measurin
Page 25 and 26: Differential pressure probes Illust
Page 27 and 28: testo 635-1 The versatile instrumen
Page 29 and 30: testo 635: Option: Radio Radio modu
Page 31 and 32: Convenient material moisture equili
Page 33 and 34: Air moisture and temperature in one
Page 35 and 36: Monitors Ambient Conditions - Effic
Page 37 and 38: Temperature measurement - fast and
Page 39 and 40: testo 925 The one channel temperatu
Page 41 and 42: testo 922/925: Option: Radio Radio
Page 43 and 44: testo 810, air temperature and infr
Page 45 and 46: testo 830-T4, non-contact temperatu
Page 47 and 48: Infrared Thermometer with switchabl
Page 49 and 50: The most important advantages of th
Page 51 and 52: The most important advantages of th
Page 53 and 54: Ordering overview testo 881 testo 8
Page 55 and 56: The thermal imagers from Testo with
Page 57 and 58: Features Detector size (in pixels)
Page 59 and 60: Technical data of the thermal image
Page 61 and 62:
Monitors Indoor Air Quality - With
Page 63 and 64:
Rpm measurement - Non-contact and m
Page 65 and 66:
Notes 65
Page 67 and 68:
for air conditioning and ventilatio
Page 69 and 70:
testo Saveris System overview testo
Page 71 and 72:
testo Saveris Components: Radio pro
Page 73 and 74:
testo Saveris Components: Ethernet
Page 75 and 76:
testo Saveris Technical data Techni
Page 77 and 78:
testo Saveris Examples of applicati
Page 79 and 80:
The right logger software for every
Page 81 and 82:
Type name Description Illustration
Page 83 and 84:
Probes NTC Illustration Meas. range
Page 85 and 86:
Measure temperature, humidity and d
Page 87 and 88:
Accessories for Testo transmitters
Page 89 and 90:
Contents Multifunction Page testo 4
show all

Measurement Engineering for Air Conditioning and ... - Bad Request

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?