Measurement Engineering for Air Conditioning and ... - Bad Request
Measurement Engineering for Air Conditioning and ... - Bad Request
Measurement Engineering for Air Conditioning and ... - Bad Request
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Accessories <strong>for</strong> Testo transmitters<br />
Accessories<br />
P2A software (parameterization, adjustment <strong>and</strong> analysis software<br />
<strong>for</strong> PC), incl. USB cable (PC side) to the Mini-DIN interface<br />
(instrument)<br />
Wall/duct holder (<strong>for</strong> mounting duct versions testo<br />
6602/6603/6612 in duct or <strong>for</strong> mounting cable version on wall e.g.<br />
testo 6604/6605/6613)<br />
Adjustment adapter (<strong>for</strong> 1-point adjustment with testo 400 or<br />
testo 650)<br />
Mains unit (desk-top) 110 to 240 VAC/24 VDC (350mA)<br />
Mains unit (top-hat rail mounting) 90 to 264 VAC/24 VDC (2.5 A)<br />
Stainless steel sintered filter, pore size 100 µm, probe protection in<br />
dusty atmospheres or at higher flow speeds<br />
Cap with wire mesh filter, Ø 12 mm<br />
PTFE sintered filter, Ø 12 mm, <strong>for</strong> corrosive substances, high<br />
humidity range (non-stop measurements), high flow speeds<br />
Metal protection cage, Ø 12 mm <strong>for</strong> humidity probes, <strong>for</strong><br />
measurement in flow velocities of less than 10 m/s<br />
Plastic protective cap (open), fast reaction time at flow velocities 〈7<br />
m/s (not suitable <strong>for</strong> dusty atmospheres)<br />
testo saline pots <strong>for</strong> control <strong>and</strong> humidity adjustment of humidity<br />
probes, 11.3 %RH <strong>and</strong> 75.3 %RH with adapter <strong>for</strong> humidity probe<br />
Reference set (testo 650, 1 %RH probe with certificate)<br />
Spare sensor system (%RH) <strong>for</strong> testo 6621 <strong>and</strong> probe series 6600<br />
ISO calibration certificate humidity , calibration points 11.3 %RH<br />
<strong>and</strong> 75.3 %RH at +25 °C/+77 °F; per channel/instrument<br />
ISO calibration certificate humidity<br />
Extension <strong>and</strong> adjustment cable, 10 m<br />
Silicon hose inner diameter 4 mm, transparent<br />
Tygon hose inner diameter 4.8 mm, transparent<br />
ISO calibration certificate/electrical<br />
St<strong>and</strong>ard DAkkS calibration<br />
1) For duct version only<br />
Part no.<br />
0554 6020<br />
0554 6651<br />
0554 6022<br />
0554 1748<br />
0554 1749<br />
0554 0647 1)<br />
0554 0757 1)<br />
0554 0758 1)<br />
0554 0755 1)<br />
0192 0265 1)<br />
0554 0660<br />
0699 3556/15<br />
0420 0006<br />
0520 0076<br />
0520 0176<br />
0554 6610<br />
0086 0001<br />
0086 0031<br />
0520 1000<br />
0520 1200<br />
testo 6920<br />
(°C)<br />
testo 6621<br />
(%RH/°C)<br />
testo 6321<br />
(∆P)<br />
� � �<br />
� �<br />
� � �<br />
� � �<br />
� � �<br />
�<br />
�<br />
�<br />
�<br />
�<br />
�<br />
�<br />
�<br />
�<br />
�<br />
�<br />
�<br />
�<br />
�<br />
�<br />
87