Measurement Engineering for Air Conditioning and ... - Bad Request

More documents

Recommendations

Info

22 Measures differential pressure 0 to 100 hPa – Practical and robust testo 510 Differential pressure measurement in testo 510 is temperature-compensated for accurate readings. They can be displayed in Pascal over the whole measurement range. Magnets on the back of the instrument allow you to work hands-free. When used with a Pitot tube, testo 510 measures air speed. Air density can be compensated to give accurate readings. • Flow velocity measurement with Pitot tube (Pitot tube not included in delivery) • Backlit display • Selectable units: hPa, mbar, Pa, mmH2O, inH2O, inHg, mmHg, psi, m/s, fpm testo 510 testo 510; differential pressure meter incl. protective cap, batteries and calibration protocol Part no. 0560 0510 Accessories Ordering data Part no. Hose set: Connection hose, silicone, 2 m long, max. load 700 hPa (mbar) 0554 0448 Pitot tube, 350 mm long, stainless steel, measures flow speed 0635 2145 Pitot tube, 500 mm long, stainless steel, measures flow speed 0635 2045 ISO calibration certificate/Pressure, Differential pressure; 3 points distributed over meas. range ISO calibration certificate/pressure, differential pressure; 5 points distributed over meas. range 0520 0095 0520 0005 Included: belt case, wrist strap, protective cap and calibration protocol Differential pressure measurement on filters Technical data Probe type Differential pressure probe Meas. range 0 to 100 hPa Accuracy ±0.03 hPa (0 to 0.30 hPa) ±1 digit ±0.05 hPa (0.31 to 1.00 hPa) ±(0.1 hPa + 1.5 %of mv) (1.01 to 100 hPa) Resolution 0.01 hPa Oper. temp. 0 to +50 °C Battery type 2 batteries Type AAA Battery life 50 h (average, without display illumination) Dimensions 119 x 46 x 25 mm (incl. protective cap) Absolute pressure and barometric elevation measurement – Practical and accurate testo 511 testo 511 measures absolute pressure with an accuracy of +/-3 hPa. It is then converted to barometric air pressure by entering on-site height above sea level. Barometric elevation measurement between two points is also possible. • Measures absolute pressure, e.g. for absolute pressure compensation in flow velocity measurements with a Pitot tube • Backlit display • Selectable units: hPa, mbar, Pa, mmH2O, mmHg, inH2O, inHg, psi, m, ft testo 511 testo 511; absolute pressure meter incl. protective cap, batteries and calibration certiificate Part no. 0560 0511 Accessories Ordering data Part no. Hose set: Connection hose, silicone, 2 m long, max. load 700 hPa (mbar) 0554 0448 ISO calibration certificate/absolute pressure, 3 meas. points distributed over meas. range 0520 0185 ISO calibration certificate/absolute pressure, 5 measurement points distributed over meas. range 0520 0125 Included: belt case, wrist strap, protective cap and calibration protocol Technical data Probe type Absolute pressure probe Meas. range 300 to 1200 hPa Accuracy ±1 digit ±3.0 hPa Resolution 0.1 hPa Oper. temp. 0 to +50 °C Battery type 2 batteries Type AAA Absolute pressure measurement to determine absolute pressure compensation when measuring flow with a Pitot tube Battery life 200 h (average, without display illumination) Dimensions 119 x 46 x 25 mm (incl. protective cap)
Pressure and flow velocity measuring instrument testo 512 testo 512 shows pressure and flow velocity simultaneously in an easy-to-read, large, backlit display. Measurement data is printed on site with date and time as well as minimum and maximum values. testo 512 has two switchable units for flow: m/s and fpm. Eight units can be set for pressure: kPa, hPa, Pa, mmH2O, mmHg, psi, inch H2O, inch Hg. Adjustable damping for sliding mean calculation, density compensation is built-in. The displayed actual value can be frozen in the display by pressing the HOLD button. The measured minimum and maximum value can be displayed and stored in the meter. 0 to 2 hPa/mbar 1 testo 512 differential pressure meter, 0 to 2 hPa, incl. battery and calibration protocol Part no. 0560 5126 0 to 200 hPa/mbar testo 512 differential pressure meter, 0 to 200 hPa, incl. battery and calibration protocol Part no. 0560 5128 TopSafe protects the measuring instrument in the field from impact, dirt and splash water. • 8 units for pressure: kPa, hPa, Pa, mm H2O, mmHg, psi, inch H2O, inch Hg • 2 units for flow: m/s, fpm • Built-in density compensation • Display light • Hold/Max/Min function • Readings printout with date/time and min./max. values 0 to 20 hPa/mbar testo 512 differential pressure meter, 0 to 20 hPa, incl. battery and calibration protocol Part no. 0560 5127 0 to 2000 hPa/mbar w/o flow velocity and Pascal measurement 3 4 testo 512 differential pressure meter, 0 to 2000 hPa, incl. battery and calibration protocol Part no. 0560 5129 Accessories Ordering data Part no. 9V rech. battery for instrument, instead of battery 0515 0025 Recharger for 9V rechargeable battery, for external recharging of 0515 0025 battery 0554 0025 Printer and Accessories Part no. Testo fast printer with wireless infrared interface, 1 roll thermal paper and 4 AA batteries Spare thermal paper for printer (6 rolls), permanent ink, measurement data documentation legible for up to 10 years 0554 0549 0554 0568 Spare thermal paper for printer (6 rolls) 0554 0569 External fast charger for 1-4 AA rech. batteries, incl. 4 Ni-MH rech. batteries with individual cell charging and charge control display, incl. impulse trickle charging, integrated discharge function, with built-in international mains plug, 100-240 V, 300 mA, 50/60 Hz 0554 0610 Transport and Protection Part no. TopSafe, protects from impact and dirt Case for measuring instrument and probes 0516 0210 Transport case for meas. instr. and probes (405 x 170 x 85 mm) 0516 0221 0516 0201 2 Simultaneous display of flow and pressure value Technical data Battery type Battery life Auto Off 10 min Measuring process air 9V block battery, 6F22 120 h Dimensions 202 x 57 x 42 mm Weight 300 g Pitot tube measurement Part no. Pitot tube, 350 mm long, stainless steel, measures flow speed Connection hose, silicone, 5m long, max. load 700 hPa (mbar) ISO calibration certificate/pressure, differential pressure; 5 points distributed over meas. range 1 Meas. range 0 to +2 hPa 0 to +20 hPa 0 to +200 hPa 0 to +2000 hPa +2 to +17.5 m/s +5 to +55 m/s +10 to +100 m/s Resolution 0.001 hPa 0.01 hPa 0.1 hPa 1 hPa 0.1 m/s 0.1 m/s 0.1 m/s Overload ±10 hPa ±200 hPa ±2000 hPa ±4000 hPa Accuracy 0.5% of fsv Measuring medium All non-corrosive gases Display LCD, 2 lines Oper. temp. 0 to +60 °C Storage temp. -10 to +70 °C Pitot tube, 500 mm long, stainless steel, measures flow speed, Longer versions on request Pitot tube, 1000 mm long, stainless steel, measures flow speed in combination with pressure probes, Longer versions on request 0635 2145 0554 0440 Calibration Certificates Part no. DAkkS calibration certificate/pressure, diff. and pos. pressure; 11 measuring points distributed over the 0520 0215 instr. meas. range (Successor organization of the DKD) 2 3 0635 2045 0635 2345 0520 0005 4 23
Page 1 and 2: Committing to the future 2011 Measu
Page 3 and 4: Learning changes What was the diffe
Page 5 and 6: instrument for every task Reference
Page 7 and 8: testo 435 - The new all-rounder The
Page 9 and 10: Probes / Option: Radio 435-2/-4 IAQ
Page 11 and 12: Measure U-value and flow using test
Page 13 and 14: Flow probes Illustration Meas. rang
Page 15 and 16: The pro set for comfort level measu
Page 17 and 18: On site test procedure to DIN EN 14
Page 19 and 20: Compact Vane Anemometer testo 416 T
Page 21: Notes 21
Page 25 and 26: Differential pressure probes Illust
Page 27 and 28: testo 635-1 The versatile instrumen
Page 29 and 30: testo 635: Option: Radio Radio modu
Page 31 and 32: Convenient material moisture equili
Page 33 and 34: Air moisture and temperature in one
Page 35 and 36: Monitors Ambient Conditions - Effic
Page 37 and 38: Temperature measurement - fast and
Page 39 and 40: testo 925 The one channel temperatu
Page 41 and 42: testo 922/925: Option: Radio Radio
Page 43 and 44: testo 810, air temperature and infr
Page 45 and 46: testo 830-T4, non-contact temperatu
Page 47 and 48: Infrared Thermometer with switchabl
Page 49 and 50: The most important advantages of th
Page 51 and 52: The most important advantages of th
Page 53 and 54: Ordering overview testo 881 testo 8
Page 55 and 56: The thermal imagers from Testo with
Page 57 and 58: Features Detector size (in pixels)
Page 59 and 60: Technical data of the thermal image
Page 61 and 62: Monitors Indoor Air Quality - With
Page 63 and 64: Rpm measurement - Non-contact and m
Page 65 and 66: Notes 65
Page 67 and 68: for air conditioning and ventilatio
Page 69 and 70: testo Saveris System overview testo
Page 71 and 72: testo Saveris Components: Radio pro
Page 73 and 74:
testo Saveris Components: Ethernet
Page 75 and 76:
testo Saveris Technical data Techni
Page 77 and 78:
testo Saveris Examples of applicati
Page 79 and 80:
The right logger software for every
Page 81 and 82:
Type name Description Illustration
Page 83 and 84:
Probes NTC Illustration Meas. range
Page 85 and 86:
Measure temperature, humidity and d
Page 87 and 88:
Accessories for Testo transmitters
Page 89 and 90:
Contents Multifunction Page testo 4
show all

Measurement Engineering for Air Conditioning and ... - Bad Request

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?