Atlas Copco rd20 in the permian Basin

More documents

Recommendations

Info

d20 XC xtra capabilities Features and Capabilities 120,000 lb (54.4 tonnes) hookload 8,000 lbf-ft (10.8 kNm) top drive 1250 CFM / 350 psi (590 l/s / 24.1 bar) compressor on board 755 HP (563 kW) deck engine 125° (52°C) high ambient cooling 2 7/8 - 4 1/2 in (73 - 114 mm) upset oil field drill pipe 4 1/2 - 8 in (114 - 203 mm) oil field drill collars Hydraulic links and elevators on top drive Hydraulic slips in 17 1/2 in (445 mm) master bushing Hydraulic make up and break out wrenches 3000 psi (206.8 bar) mud piping Nonincendive switches in console High-Intensity lighting 10 wHat’S nEw In atLaS cOPcO DRILL RIGS — OIL & GaS InDuStRy The RD20 is highly mobile, rapid to rig up and flexible enough to adapt to almost any location requirements. The patented, carriage feed system and detached-table design provide exceptional performance and economy, as well as the structural strength to handle the toughest drilling conditions. rd20 x x x x x rd20 XC x x x x x xc xc xc xc xc xc xc xc Top drive with elevator links A mounting assembly for the links is secured to the top-drive case. Rated for 120,000 lb (54 tonnes) — plus a safety factor — this design enables the links to tip In/out to handle pipe, collars and casing. Cylinders are attached to the mounting Assembly and each link to tip the links out from hole center and back. The spindle Sub includes a floating sub and saver sub. The hydraulic elevators open/close And lock with cylinders mounted on the elevators. A dualcaliper spindle brake is Available for directional drilling. Virtually hands-free pipe handling is easy, whether From a trailer, tubs, v-door or automated pipe loader. Table and Slips The standard RD20 table assembly has been lowered 12 in (305 mm) to make Additional working space for the elevator system and breakout wrenches. The Table has a 26 in (660 mm) available opening and is fitted with a 17 ½ in (445 mm) Master bushing and available hydraulic slip assembly. This table assembly is a Strong, solid base that is supported on all sides to handle tough drilling loads. Air / mud piping The RD20 XC mud piping has been redesigned to accommodate higher Pressures. The air manifold is set up to handle auxiliary compressors and a Booster system. The main air valve and blow-down valve are actuated from the Driller’s console. Connections for water injection and DHD lubricator are included. The mud piping is set up for a wide range of oil fi eld mud systems. It includes a Manual gate valve, a connection and valve for a mixer line, and a heavy-duty mud Gauge. Air and mud connections are at the side of the deck for easy access. Wrenches The table assembly includes two heavy-duty pedestal mounts on the helper’s side to mount a hydraulic make-up and break-out wrench. Both pedestals are height adjustable — up to 13 in (330 mm) with pin holes every 2 in (51 mm) — to accommodate a wide range of pipe and collar sizes. Both wrenches are heavy-duty chain-type that are adjustable to fi t a range of diameters, and are hydraulically activated. The wrenches can be turned over to reverse their function. Both wrenches are individually activated from the driller’s console. deep hole driller 2 / 2010
wHat’S nEw In atLaS cOPcO DRILL RIGS — OIL & GaS InDuStRy predator drilling System The Predator Drilling System is a three-component package consisting of a mobile rig, substructure and a pipe skate. The components are designed, manufactured and supported by a global network of Atlas Copco stores and distributors. Predator is built oil field tough and is licensed API 4F, 3rd edition. HOOK LOAD CAPACITY TOP DRIVE- hydraulic power high torque range high speed range spindle ID additional features A REDUCTION OF NON-DRILLING TIME AND COST by improving mobility and reducing rig up time ENHANCED SAFETY by reducing crew size, manual labor; using hands-free pipe and casing handling and a simple, precise, on-demand control system IMPROVED DRILLING PERFORMANCE of a 950 HP (708 kW) engine and hydraulic system with enough power and speed to maintain maximum production in even the most challenging drilling conditions LOWER OPERATING COSTS of a hydraulic system built with premium, high efficiency components and designed to utilize less power, thereby reducing fuel consumption SMALLER ENVIRONMENTAL IMPACT with special leak and spill protection features and a substructure design suited to zero impact locations CONFIDENCE AND RELIABILITY OF A DRILLING SYSTEM DESIGNED “OIL FIELD TOUGH” and Licensed API 4F, 3rd Edition deep hole driller – 2 / 2010 u.S. 100 ton/200,000 lb 30,000 lbf-ft @ 0-90 rpm 15,000 lbf-ft @ 0-180 rpm 5 in 0-90° tip out with lock replaceable swivel cartridge directional rotation lock floating sub. TELESCOPING MAST HYDRAULIC “CARRIAGE” FEED SYSTEM SINGLE ENGINE POWER CUSTOM CARRIER WITH HYDRAULIC DRIVE meTriC 91 tonnes/90,718 kg 40.7 kNm @ 0-90 rpm 20.3kNm @ 0-180 rpm 127 mm u.S. meTriC Licensed API 4F, 3rd edition 180 ft/min 54 m/min 950 hp 708 kW 500 hp 373 kW SUBSTRUCTURE TOP WITH BOP HOUSE rated capacity large, uncluttered work floor removable table (clear opening) API master bushing (slip assembly) hands-free breakout system operator’s control station u.S. HANDS-FREE PIPE HANDLING SYSTEM PIPE HANDLING CAPACITY PIPE STORAGE AND HANDLING Licensed API 4F, 3rd edition 100 ton/200,000 lb 200 ft² 44 in 17 ½ in meTriC 91 tonnes/90718 kg 20.4 m² 1118 mm 445 mm hydraulic slips and roughneck on work floor or in drill cabin optional Class 1, Division 2 rating hydraulic pipe skate Range II and III to 24 in (610 mm) twin fold-out pipe racks 11
Page 1 and 2: AN ATLAS COPCO PUBLICATION FOR THE
Page 3 and 4: deep hole driller - 2 / 2010 hAmmer
Page 5 and 6: The Atlas Copco RD20 and other equi
Page 7 and 8: looKinG inTo The FuTure driller tal
Page 9: are available on the full-color dig
Page 13 and 14: tOOLInG — OIL & GaS InDuStRy Jet
Page 15 and 16: 305 foot (93 meters) hole. Bedrock
Page 17 and 18: Atlas Copco expands production in U
Page 19 and 20: ite plug. The bentonite plug serves
Page 21 and 22: The collected drill data is display
Page 23 and 24: new Compressors made environmentall

Atlas Copco rd20 in the permian Basin

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?