FR 70ND: 7.300 kg nearly 200 tons of strength in the jaws. CS 70RS: 7.200 kg cutting scrap materials in Sweden. FR 50ND: 5.200 kg working in Udine, Italy. FR 100N: 11.500 kg fitted on 85 ton excavator. HC 60: 6.500 kg working in Poland.
Hall: A6 Booth no. 405 HC 100: 11.000 kg primary demolition with 2,000 mm jaw opening. “We create monsters!” “But useful ones for truly heavy demolition and recycling purposes”. Trevi Benne is a devoted and specialiced manufacturer of demolition and recycling equipment for excavators from 50 to 150 t. The international demolition and recycling industries has during the last years seen a clear change towards bigger and heavier attachments for more powerful and effcient handling. Trevi Benne has during the last five years developed a strong production method to meet these needs delivering crushers, pulverisers and scrap shear from 5 to 12 tons to user all over the world. Hydraulic Jaws HC Series The HC primary hydraulic jaws was created for the most delicate and precise demolitions, permits the operator to move with agility in the destruction of reinforced cement structures and in the removal of materials even of a considerable height; at the same time, the profile of the claws, piloted by a double cylinder and equipped with shears for cutting iron and a reinforced concrete rod inside the framework, allows for operating without any problems, even when the structures in are strongly hard. Just three key words to define the major strong points of the HC Series: powerful, because it is equipped with cylinders that guarantee exceptional gripping power in a short time; compact, because it was designed for delicate demolitions characterized by very tight moving spaces, where it is fundamental to guarantee an optimal visibility for the operator, and therefore absolute safety; fast, because it is equipped with continuous hydraulic rotation that greatly reduces the necessity for maneuvers, and therefore reduces the time needed to move the machine. Rotating Hydraulic Pulverizer FR Series The possibility to execute the two distinct phases of demolition (primary and secondary) with only one machine is the dream of every professional working in this sector: to be able to utilize a single excavator, without having to substitute the equipment, guarantees important economic advantages and noticeably reduces the demolition time. This is the difficult problem that was resolved by Trevi Benne, with the FR Series rotating hydraulic pulverizer, a hybrid product that allows the operator to tackle both phases of TREVI BENNE S.p.A. Via A. Volta, 5 • 36025 Noventa Vic.na Vicenza (VI) - Italy Phone: +39 0444 760773 • Fax: +39 0444 861182 www.trevibenne.it • info@trevibenne.it demolition with one machine, thanks to its unique characteristics. The continuous hydraulic rotation allows for perfect jaws functioning, thanks to the possibility of reducing movements to a minimum, and therefore working with a high level of precision; the ample configuration of the jaws used on this model, typical of standard demolition model, and the presence of two inter-changeable and reversible blades for iron cutting in the framework, permit the FR Series to operate as a crusher with the same efficiency. Marilyn Hydraulic Shears CS Series Designed for modern industrial demolition sites that require significant cutting strength at considerable heights and for scrap metal and iron or similar material recycling professionals. Structural and aesthetic improvements have been introduced in the latest versions, seeking to offer an increasingly reliable piece of equipment that caters for the needs of the client/user. In order to help cutting the material at the top, the shape of the interchangeable tip blade has been amended, the dimensions of the guide blade have been increased, the cylinder has been installed in a backward position so as to provide total protection for the shaft and protection has been created for the blade screw holes so as to prevent wear. The design of the mouth and the positioning of the blades make it possible to obtain linear, clean cuts in the scrap metal, meaning that loading operations can be simplified and thus reducing handling and transport costs. For further technical info about demolition, recycling and earthmoving attachments go to www.trevibenne.it.
Change language