Armour Security Clifford: viper: hornet / valet: Clifford Hornet ... - Start
Armour Security Clifford: viper: hornet / valet: Clifford Hornet ... - Start
Armour Security Clifford: viper: hornet / valet: Clifford Hornet ... - Start
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CANMAX400<br />
CAN Bus Multi doorlock & transponder interface<br />
The new CANMAX400 (XK400) offers dealers The Power of ONE : a standalone<br />
module that interfaces with virtually every vehicle and databus architecture on<br />
the planet! CANMAX costs a little more – but the time it saves by docking and<br />
quickly interfacing with the CAN bus will make the CANMAX series a must have<br />
in your bay!<br />
CANMAX400<br />
DLPKGM<br />
GM ALL Doorlock & Passkey Interface<br />
DLPKGM is a pre-configured self learning Data Bus interface module compatible<br />
with most American GM vehicles from 1998 through 2008. It is compatible<br />
W2WTM with any remote starter and supports 2-way D2DTM communication with<br />
any one of our Directed D2DTM ready modules.<br />
DLPKGM is a doorlock and transponder interface that will also allow you to control<br />
other available options such as: Factory alarm, Parking lights, Heated seats, Trunk<br />
release, Power hatch, Window roll-up, and Memory seats.<br />
The DLPKGM is compatible with GM passive anti-theft systems such as Vats,<br />
Passlock, PK3 & PK3+.<br />
The DLPKGM provides outputs for the remote starter in W2W or D2D such as:,<br />
Tach, Hood switch, Door triggers, Trunk pin, Hand brake, and Foot brake.<br />
DLPKGM<br />
DLPKKICH3<br />
Ignition interface and RF transponder bypass module for Chrysler GEN3 2008+<br />
vehicles<br />
The module is an ignition interface module for use with the 2008/2009 Chrysler,<br />
Dodge and Jeep vehicles with the new style key and ignition barrel. This new<br />
design utilizes a patent pending concept that does not require the installer to<br />
solder wires and installation only takes about 30 minutes. It is the first and only<br />
solution that maintains the integrity of the vehicle and does not void the vehicles<br />
warranty.<br />
• No wires to solder<br />
• RF transponder bypass<br />
• CAN Bus doorlock and factory security control<br />
DLPKKICH3<br />
CANCRUISE<br />
DATACRUISE All with Wireless User Interface<br />
PKALL<br />
Data Transponder ALL Interface<br />
W: www.armourauto.com | E: sales@armourauto.com | F: 0800 7839124 | T: 0800 7839125<br />
Programmable drive-by-wire cruise control system for today’s most popular entry<br />
level vehicles including Honda, Toyota and many more drive-by-wire equipped<br />
vehicles such as the Ford Focus. The CANCRUISE uses patented technology to<br />
detect variations and loads and adapts itself to control throttle position sensor to<br />
give user a perfectly comfortable ride under any condition.<br />
Best of all, the CANCRUISE features a wireless control switch that can<br />
be mounted on the steering wheel or double sided taped anywhere on the<br />
dashboard. No more holes to drill or wires to run. Easy installation and factory<br />
fit and finish make this product a great opportunity piece for any dealer. The<br />
CANCRUISE comes pre-loaded with all firmware so there is nothing to download<br />
when installing it, simply plug and play.<br />
CANCRUISE<br />
The PKALL is a data transponder bypass module that is compatible with more<br />
than 700 vehicle models from 1998 through 2008. This module is Self Learning<br />
and ready to install right out of the box!<br />
The PKALL is the ultimate solution for Toyota/Lexus vehicles including push-tostart<br />
equipped models.<br />
PKALL<br />
KILVW<br />
Volkswagen and Audi Interface Kit<br />
Remote car starter interface kit for Volkswagen vehicles. Disarms factory alarm.<br />
No programming required.<br />
• For Volkswagen vehicles<br />
• PATS transponder bypass kit with disarm OEM alarm<br />
• Maintains the integrity of the vehicle’s security on push-to-start ignition<br />
systems<br />
• No programming required<br />
• Simplified and fool-proof installation instructions<br />
• Estimated install and program time is less than20 minutes<br />
KILVW<br />
229