Armour Security Clifford: viper: hornet / valet: Clifford Hornet ... - Start

LOCKS, DOORS & winDOwS
DOORS & LOCKS
Door Lock Relay Assembly
Pre-wired door lock relay assembly.
This great time-saver also comes
with resistors for some new-model
vehicles. Requires alarm-supplied
momentary negative pulses. Plugs into
most Directed Electronics systems.
(Two 40-amp relays built-in.)
451M
Cable Door Lock Bracket Kit (2 pack)
524CL
5 Wire Central Door Lock Motor Kit
PC5-49
Slotted Mounting Strip
S-52
238
Door Lock Pulse Generator
Converts a latched trigger input
to momentary pulsed negative
and positive outputs for door lock
interface. Can be used to add door lock
interface with systems without door
lock outputs. Includes dual polarity
outputs for cars that require double
pulse to unlock, and can provide
ignition-controlled door locks.
452T
Door Trigger Diode Interface Module
452D
2 Wire Central Door Lock Motor
S-38
Connecting Rod
S-40
Universal Data Interface
This power door lock interface
module allows the transmitter of
your aftermarket vehicle security or
keyless entry system to operate a
variety of power door lock systems.
It is intended for use on single-wire,
dual resistance door lock systems
like those used on many 2000 and
newer Chrysler and GM vehicles. This
intelligent interface automatically
learns any resistance value from 0 to
12 volts, (+) or (-).
456L
5 Wire Central Door Lock Motor
S-39
2 Wire Actuator with Clamp & Rod
S-55
Connecting Screw Clamp
S-42
Boot Release Solenoid
Interfaces with existing latch or
release cable to provide power boot/
hatch release by switch or remote
control. Comes with mounting bracket,
hardware and momentary switch.
522T
2 Wire Central Door Lock Motor Kit
PC5-48
5 Wire Actuator with Clamp & Rod
S-56
T: 0800 7839125 | F: 0800 7839124 | E: sales@armourauto.com | W: www.armourauto.com