Badger Facts - Badger Meter Europa GmbH

Badger Meter Badger Meter
Ideally suited for leak detection in water
networks, water consumption measurements
and irrigation plants, the meter
has been designed for applications
without a power supply where exact
consumption or flow rates are required.
Of course, the B-MAG I M5000 can
also be used with an available power
supply. The meter can be powered with
main voltage and in case of a main failure,
it is powered by an internal battery.
Important data are consequently saved.
The B-MAG I M5000 is a batterypowered
electromagnetic flow meter
with a very high accuracy even at very
low flows.
05
– Battery operated water meter
The excellent repeatability as well as
the above-average battery life makes
this innovative water meter indispensable
for the water market, even at the
most remote measuring sites.
The standard meter is equipped with
an internal datalogger which can readout
via an IrDA or RS232 interface with
ModBus ® RTU protocol. The collected
data can also be retrieved via radio frequency
or GSM. The data can thus be
centrally compiled and evaluated.
NEW
The new MAG meter
generation
With the verification device, the new
electromagnetic ModMAG TM M2000 and
B-MAG TM I M5000 can be checked on
site in regular time intervals at a low
cost and without interruption of the
proc ess. All important parameters of the
flow meter are measured, protocoled
and evaluated. Company internal quality
directives as well as governmental
requirements, can be observed quickly
and without the need for calibration on
external test stands.
Furthermore, the measuring data of the
new MAG meter generation can be retrieved
via GPRS and monitored from
your desk.
Wireless data recording via GPRS –
The new dimension
For consumption monitoring and leakage
reduction in water supply systems,
Badger Meter offers the ability to record
wireless the measuring data from
flow meters. Included is precise flow
measurement in large channels and rivers
for the monitoring of navigability and issuance
of flooding forecasts; monitoring
and notification of overflow basins for
rainwater, sewage plants, storm water
overflow plants as well as for the control
of irrigation plants or level monitoring;
Possible connection to MAG meters, RCDL ® , Turbo ®
meters, impeller meters and ultrasonic flow meters
and notifications for automatic filling
and connection to the supplying system.
Those data are transmitted to and filed
on a central server via a GPRS module.
The information can be retrieved, visualized,
evaluated and downloaded via a
password-protected access. The password
is set by the customer.
For a low investment, the user is saving
tremendous costs compared to the clas-
sic data recorder. Users can manage
wireless measuring sites and have worldwide
remote access via the internet. The
solution is ideal for measuring sites in
difficult areas and optimizes global applications.
It offers high flexibility thanks to
the extremely small space requirement.
The installation of the GPRS module is
done quickly and putting into operation is
easy. Service and maintenance are also
made easier.
06