B8 AC Pro Manual - Imaxrc

More documents

Recommendations

Info

Warnings and safety notes This is a 'memory effect'. NiCd and NiMH batteries are said to suffer from memory effect. They prefer complete cycles; fully charge then use until empty, do not recharge before storage - allow them to selfdischarge during storage. NiMH batteries have less memory effect than NiCd. - The Lithium battery prefers a partial rather than a full discharge. Frequent full discharges should be avoided if possible. Instead, charge the battery more often or use a larger battery. - The brand-new NiCd battery pack pack is partially useful with its capacity until it has been subjected to 10 or more charge cycles in any case. The cyclic process of charge and discharge will lead to optimize the capacity of battery pack. 8 Those warnings and safety notes are particularly important. Please follow the instructions for a maximum safety; otherwise the charger and the battery can be damaged violently. And also it can cause a fire to injure a human body or to lose the property.
CHG/DCHG PROGRAM User Setup PROGRAM Press Press LiPo/LiFe/Lilo PROGRAM NiMH/NiCd PROGRAM NiMH/NiCd PROGRAM Press Data View Data Press Press Press Charging Normal/Balance/Fast/Storage Press Discharging Normal/CV-mode Graph Cycle Individual cells <strong>Pro</strong>gram flow chart Press Discharging Normal/Auto/CV-mode Press Cycle DCHG>CHG/CHG>DCHG Charging Normal/Pulse Press Discharging Normal/CV-mode 9
Page 1 and 2: Instruction Manual
Page 3 and 4: Special features Special features -
Page 5 and 6: Exterior of the charger ��
Page 7 and 8: Warnings and safety notes Be sure t
Page 9: Warnings and safety notes battery m
Page 13 and 14: Navigation on the screen To manipul
Page 15 and 16: Lithium battery (LiIon/LiPo/LiFe) p
Page 17 and 18: the charge current will be decrease
Page 19 and 20: ENTER' button for three seconds. Li
Page 21 and 22: NiMH/NiCd battery program DC: 180W
Page 23 and 24: NiMH only) Parameter set-up for NiC
Page 25 and 26: Select program and start the proces
Page 27 and 28: Pb (Lead-acid) battery program DC:
Page 29 and 30: Select program and start the proces
Page 31 and 32: [LiPo 3S CHG] Chg Mode : Balance En
Page 33 and 34: DAT GRP CYE CEL C1: 4.12V C2: 4.13V
Page 35 and 36: Balance error... Low cell vol. STOP
Page 37 and 38: Glossary of terms same as 2000mA (2
Page 39 and 40: Maximum circuit power chart For the
Page 41 and 42: Opera voltage range: 11.0 ~ 18.0V D
Page 44: All specifications and figures are

B8 AC Pro Manual - Imaxrc

Create successful ePaper yourself

Delete template?

Save as template?