Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Lithium battery (LiIon/LiPo/LiFe) program<br />
DC: 180W IV: 14.05V<br />
CHG/DOHG<br />
PRESS<br />
These programs are only suitable for charging and discharging Lithium batteries with a nominal voltage of<br />
3.3V, 3.6V or 3.7V per cell. These batteries need to adopt different charge technique is termed constant<br />
voltage(CV) and constant current (CC) method. The charge current varies according to the battery capacity<br />
and performance. The final voltage of charge process is also very important, it should be exactly matched<br />
with the charged voltage of the battery. They are 4.2V for LiPo, 4.1V for LiIon and 3.6V for LiFe. The charge<br />
current and nominal voltage as for cell-count set on the charge program must always be matched with the<br />
battery being charged.<br />
Select 'CHG/DCHG' program at main menu by rotating , and press to go into the program.<br />
Parameter set-up for Lithium battery (LiIon/LiPo/LiFe)<br />
Lithium battery [Lilon/LiPo/LiFe] program<br />
LiPo [0] 1C 500mAh<br />
Chg current : 0.1A<br />
Dchg current : 0.1A<br />
Dchg voltage : Default<br />
End current : Auto<br />
Chk time : 10min<br />
Safety temp : 50C<br />
13
Change language