11.01.2013 Views

StorageTek SL8500 User's Guide - Downloads - Oracle

StorageTek SL8500 User's Guide - Downloads - Oracle

StorageTek SL8500 User's Guide - Downloads - Oracle

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Capacities<br />

A basic library can store up to 1,448 data cartridges. This total does not include<br />

cartridges in the cartridge access port (CAP) or the reserved slots. A total of 198 slots<br />

are dedicated to diagnostic and cleaning cartridges. See Appendix A, “Cartridge Slot<br />

Locations” for information on slot locations.<br />

There are also eight drop-off slots in the library, two for each robot. These slots are<br />

used in the event of a robotic failure when there is still a cartridge in the hand.<br />

TABLE 1-1 shows the data cartridge capacities in a single library.<br />

TABLE 1-1 Data Cartridge Capacity<br />

Basic Library<br />

Expansion Modules<br />

Module Type Cartridge Capacity<br />

Drive and Electronics 1 0<br />

Robotic Interface 800<br />

Customer Interface 2 648<br />

Basic library 1,448<br />

First storage expansion module 3,176<br />

Second storage expansion module 4,904<br />

Third storage expansion module 6,632<br />

Fourth storage expansion module 8,360<br />

Fifth storage expansion module 10,088<br />

1 There are no cartridge storage locations in the Drive and Electronics Module.<br />

2 The Customer Interface Module contains 198 storage slots for cleaning and diagnostic<br />

cartridges.<br />

Note – The totals shown do not include slots in the cartridge access port (CAP) and<br />

pass-thru-port.<br />

See Appendix A, “Cartridge Slot Locations” for information on reserved slots and<br />

cartridge addresses.<br />

96154 • Revision: KB 5

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!