Winter 2004-5 - Karlu Photographic

Novoflex BasicBall
The BasicBall is essentially a
hemisphere with nine holes
drilled in it to allow the attachment
of various length legs at
differing angles, or rods or bendy
arms for flashguns, creating a
lightweight and versatile support
system with the addition of other
accessories. The BasicBall (in
silver or blue) comes supplied
with three 20cm legs.
NVBB BasicBall blue . . . . . . . . 42.50
NVBBS BasicBall silver . . . . . . . . 42.50
NVMPS 15cm extension rod set . 20.00
NVBBG Handgrip for BasicBall . . 34.00
Convert to a macro bracket . . .
Manfrotto Table
Top Tripod
709B Digi Table Tripod is an
all-aluminium, sturdy and
lightweight support for all kinds of
cameras. Complete with ball head.
Supports 2kg. MA709B £24.95
Manfrotto Table Top Kit
The 345 Table Top Kit comprises a 709
tripod, 482 Mini Ball head, 259B
Extension (15.6–25cm) and leather pouch
case. MA345 £61.70
MA259B Extension rod only . . . . . 14.95
FAX: 01420 543 544
. . . or hand grip . . . or a
tripod!
(see p31
for info on
the
monopod).
NVBBST Telescopic leg (each) . . . 35.00
Rods, arms and flash shoes are described in
more detail in the close-up and macro
section.
Manfrotto
035 Super
Clamp
A universal
clamp which
mounts on any tube from 13–55mm. 5/8”
hex socket attachment. MA035 £16.45
MA037 1/4” 3/8” converter . . . . . 5.00
MA208 3/8” head platform . . . . 12.95
Manfrotto
244RC Arm
An articulated arm with variable
friction, complete with ball head
and 200PL quick release. Fits
035 clamp and takes 4kg load.
MA244RC £95.00
155RC Double Ball
Tilt Head fits into
the 035 clamp to
provide a camera
support with quick
release.
MA155RC £47.50
CLAMPS & SUPPORTS
Ergorest MultiTripod
Made in Finland, this is a heavy duty multipurpose
support which can be used as a table
or ground level tripod, chest support, car
support, and with a suitable clamp to a table
top, as a repro stand.
The metal frame is covered with a thick
layer of rubberised plastic, which won’t
damage expensive lenses if knocked, without
compromising rigidity.
With a suitable head attached, the
MultiTripod is capable of carrying large scopes
or 600mm lenses. The screw is reversible 1/4”
and 3/8” thread. The locking lever position can
be adjusted for optimal ease of tightening, and
can also be replaced on the other side for lefthanded
use.
Weight 750g.
223 x 180 x
75/170mm
ERMT £59.95
Manfrotto 359 Long Lens
Support
Complete
with 035
Super Clamp
and 482 Mini
Ball Head,
the support
rod adjusts
from
40–60cm.
Weighs 690g.
MA359
£42.95
Manfrotto 241FB Pump Cup
A suction cup with 60mm flat base and
3/8” screw for mounting suitable ball
head, and capable of carrying a
lightweight photo or video camera.
MA241FB £61.75
Versions also available for car window
mounting and 5/8” spigot accessories.
Manfrotto 349 Column Clamp
Designed to work with removeable tripod
columns between 25 to 28mm diameter,
such as those of the Manfrotto 190 and
055 series. Can be securely fixed to bars
of up to 55mm width. With a suitable
head, this is an ideal accessory for nature
photography/observation. MA349 £42.95
Version to take the triangulated
centre column of the 440, 441, 443 and
444 carbon fibre tripods. MA349C £47.50
Speed Graphic
25