Winter 2004-5 - Karlu Photographic

Manfrotto lighting adaptors
151 converts a tripod with 3/8”
screw to a 5/8” spigot (add the
HA5120 bushing if you have a
1/4” screw) to make a lighting
support. MA151 £4.70
119 converts a 5/8”
spigot socket to either a
1/4” or 3/8” screw type.
MA119 £3.50
118 short spigot creates a 1/4” or
3/8” fixing from a 5/8” socket.
MA118 £2.80
013 double 5/8” spigot connects
two 5/8” socket items together.
MA013 £5.30
158 double socket
connects two 5/8”
male spigot items
together, or creates
female socket from
male. MA158 £9.95
014-14 creates a lockable
1/4” male thread from 5/8”
spigot. MA01414 £6.50
014-38 is the same but with
3/8” thread. MA01438 £6.50
Umbrella mounts
Tilting mounts which allow a brolly to be
used with a camera flash.
Manfrotto 026 fits on a standard 5/8”
flash stand spigot, or 1/4 or 3/8” tripod
screw. Has a
1/4” or 3/8”
reversible top
screw, so a TTL
cord can be
directly
attached (or
the Hama 6959
shoe on p51).
MA026 £20.00
Lastolite
2405 has a
Metzspecific
attachment
to the flash
base socket,
as well as
standard
shoe mount.
LA2405
£28.95
FAX: 01420 543 544
Manfrotto 175 clamp
Strong spring clamps with
5/8” spigot attachment for a
wide range of studio accessories.
Handy for
lightweight items in
difficult
places. Jaw
opening is
40mm.
MA175 £7.40
Manfrotto 043 Sky Hook
Gaffer grip for poles
from 25–65mm with
attachment points for
16mm accessories,
one with 013
double ended
adaptor.
MA043
£26.40
Manfrotto cable
clips
Three sizes to clamp
cables to lighting
stands. Supplied in sets of 4.
MA093 Large (28–40mm) . . . . . . 3.50
MA206 Medium (25–28mm) . . . . . 3.50
MA064 Small (18–26mm). . . . . . . 3.50
Manfrotto Stand Holder
Keep stands out of way when not in use.
Holds 8 stands with standard 5/8” spigot
tops. 64mm distance between holes.
Width 115cm; depth 19cm. MA027 £18.80
Manfrotto Autopole System
LIGHTING
The original adjustable lighting pole system. The pole is extended and the
cantilever lock exerts pressure on the end suctions cups to securely lock in place.
032B (right)
Length 210–370cm. Diameter
40/45mm. Weight 2.2kg. Black
MA032B £72.00
076B (middle)
Length 150–270cm. Diameter
40/45mm. Weight 1.83kg. Black
MA076B £68.90
Poles are shown in chrome finish
for clarity. All items priced here are
in black finish.
Background supports
045 B/P Triple
Hooks
Set of two background
paper
holders for three
Expan 046. Can
be fixed to a
wall with the
supplied studs and screws, or screwed to
an 035 Super Clamp for pole mounting.
MN045 £31.70
059 B/P Single Hooks
Set of two background
paper hooks which fit
into the 035 Super
Clamp socket, taking
the 046 Expan.
MA059 £15.20
059WM Single Hooks
As above, but with
bracket for mounting direct to a wall.
Complete with screws. MA059WM £15.20
046 Expan
Insert into
the ends of a
paper roll
with core
diameters 46–76mm, includes plastic
chain and weight. MA046 £55.50
046MC Expan as above but with metal
chains. MA046MC £66.50
077B (left)
Length 100–170cm. Diameter
40/45mm. Weight 1.5kg. Black
MA077B £61.50
032 Base
Tripod base for above poles. 126cm
footprint. MA032BASE £35.00
033 Extension tube 2m length
MA033B £21.50
034 Extension tube 1.5m length
MA034B £18.50
SAVE 5%
on these prices
when you spend
£150 or more
on Autopole
and Expan
(applies to
items
purchased at
the same time)
More background
support options are
featured overleaf.
Other background support accessories
MA047-2 Alu-Core for uncored paper.
Length 275cm; 50mm dia . . . . . . . . 35.20
MA062-2 B/P Counterweight. . . . . 23.50
MA091 Expan Chain 1m plastic. . . 7.00
MA091MC Expan Chain 1m metal . . 25.80
MA039 U Hooks . . . . . . . . . . . . . . 8.25
MA035 Super Clamp . . . . . . . . . . 16.45
MA038 Double Super Clamp . . . . 34.00
see page 25 for other Super Clamp items
Speed Graphic
67