Winter 2004-5 - Karlu Photographic

Pro-T and Press-T
Fast-handling brackets which keep the
right hand on the camera release in both
horizontal and vertical position, and
maintain the flash in the correct ratio to
the film format. Because you hold the
camera and not the bracket, we recommend
these for cameras with grips and
drives.
A built-in 3-degree downward tilt
compensates for close subjects. ‘Cord
keep’ tidies TTL cords away from the lens.
The base will fit directly to the
Stroboframe QRC quick release, and will
accept camera anti-twist plates. Supplied
with 1/4” mount screw (standard and
other flash shoes extra–see details on this
page).
Pro-T Height 23.5cm. Weight 397g.
STPROT £89.95
Press-T is exactly the same design as the
Pro-T but is 18cm high. Suits photographers
working with small groups, or close
to subjects, or who want a bracket with
minimal bulk. Weight 312g.
STPRST £84.95
FAX: 01420 543 544
Folding Flip
A development of the Quickflip design for
35mm and most digital cameras. The
extra-wide base has multiple mounting
slots to adapt to a wide range of cameras,
and it accepts anti-twist plates. This
lightweight bracket has a foam grip and is
made from the same high grade materials
as the other models.
Two press-button locks allow it to fold
to fit into camera bag or pocket with ease.
Height 22.8cm. Weight 250g. Folds to
21.6Lx7.6Dx9.5H cm. STFF £69.95
Pro-T/m is a version of the Pro-T with base
configured for the Mamiya 6, 6MF and 7,
allowing film loading and lens changing
whilst on the bracket. STPROTM £109.00
Pro-RL and Pro-SQ
These brackets offer ideal balance with
heavier set-ups, with the left hand
holding the whole outfit weight via a
cushioned grip.
The TiltTrigger mechanism allows onehanded
flash angle adjustment in 12 clickstop
positions. A pivoting ‘kickstand’
allows the bracket to be put down without
falling over. Brackets will accept all antitwist
plates and flash mounts.
Pro-RL has camera rotator, for 35mm and
645 format cameras. Weight 935g,
STPRL £119.00
Pro-SQ has fixed camera platform, for 6x6
and Mamiya RB/RZ. Weight 820g.
STPSQ £109.00
Flash mounts
3
2
Bracket Shoe Mount (1) is a clamp-lock
mount for shoe-type guns, supplied as
standard with Quickflips, Stroboflip and
Camera Flip; extra on other brackets.
STSHO £10.00
Universal Shoe Mount is a version of the
above for general purpose use. It lacks the
bracket locating pin, but is supplied with a
1/4” screw knob, so can be used with
many non-Stroboframe brackets and
stands. ST405 £9.00
Bracket Handle Mount (2) is a bracket
for all handle-mount guns with a nylon
jubilee-clip type attachment which won’t
scratch the flash. Fits all Stroboframe
brackets excl Folding Flip. STHAN £13.00
Metz quick-release mounts
Although the Bracket Mount above can be
used with Metz guns, the quick-release
mounts have a machined tongue which
fits into the base of a Metz 45 or 60 gun.
Compatibility shown below:
Bracket Metz flash type
45/60 50/70MZ
Camera Flip, QR66,
Pro 66, Mount 2 Mount 3
Pro-T, Press-T Mount 2 not recc.
Pro-RL, Pro-SQ Mount 4 Mount 4
STMTZ2 Metz Mount 2 (3) . . . . . . 17.00
STMTZ3 Metz Mount 3 (4) . . . . . . 19.00
STMTZ4 Metz Mount 4 . . . . . . . . . 17.00
1
4
FLASH
Anti-twist plates
Sit between the camera base and the
bracket to prevent the camera twisting on
the screw. All versions are £9.00
Camera Plate
Bronica ETR STETR
Bronica SQA STSQA
Bronica GS-1 STGS1
Canon EOS 1/N EOS 3 STEOS
Canon EOS 1HS/RS STBE1
Canon EOS 5 STH35
Canon EOS 5 + VG10 grip STVG1
Canon EOS10D STEOS
Canon EOS10D c/w batt pack cork pad
Canon EOS300D STEOS
Canon EOS300D c/w grip cork pad
Canon EOS1D STBE1
Canon EOS1Ds STEOS
Canon all other models STSLR
Fuji S2 Pro, S3 Pro STFS1
Hasselblad STHAS
Mamiya (except 6/7) STMAM
Minolta Dynax 9 STH35
Minolta all other models STSLR
Nikon D1X STNF5
Nikon D2H STEOS
Nikon D70 STNF4
Nikon D100 STSLR
Nikon F4 + MB20 STH35
Nikon F4 + MB21 STNF4
Nikon F4 + MB23 STBE1
Nikon F5 STNF5
Nikon F90/F90X STH35
Nikon F90/F90X + MB10 STBE1
Nikon F100 STH35
Nikon F100 + MB15 STBE1
Nikon all other models STSLR
Olympus E1 cork pad
Pentax 35mm inc *istD STSLR
Pentax 645/67 STPTX
Flash anti-twist plate
Nikon SC-17 cord STSC17
Stroboflip
An ultra-compact cradle for 35mm SLRs
which keeps the flash over the lens, and
allows the camera to rotate from landscape
to portrait. Because the flash is
kept at the same height as it would be
when mounted on the camera, the
Stroboflip does not produce the lighting
benefits of the other brackets. Suits shoe
mount guns (includes mount), and will
accept off-camera TTL cords. Takes camera
anti-twist plates, and is supplied with a
300-SLR type. Weight 255g.
STFLP £69.95
Speed Graphic
53