TENDER FORM - Dr. Panjabrao Deshmukh Krishi Vidyapeeth

TENDER FORM 

Tender for : ________________________________ Price: Rs.1000.00 

Issued to _________________________________________________________________________________________ 

DD No._______________________________________ Date _________________________________ 

To, 

Dear Sir, 

The Chairman 

Central Purchase Committee & 

Head Department of Horticulture 

Dr. Panjabrao Deshmukh Krishi Vidyapeeth, 

P.O. Krishi Nagar, Akola 444 104 (MS.) 

1. In response to the tender notice published in the daily newspaper __________________ 

dated ________ or at web site www.pdkv.ac.in . I/We submit herewith the tender form 

along with cost of tender form of Rs. 1000/- (Rs. One Thousand Only) in the form of 

Demand Draft of only Nationalized Bank in favour of The Assistant Registrar, College 

of Horticulture, Akola payable at State Bank of India, Dr. PDKV Branch, Akola (No. 

2171) for the supply of _______________________________________________________________. 

2. I/We have thoroughly examined and understood the terms and conditions of the tender 

mentioned in Appendix-I and I/we agreed to abide by them in full. 

3. I/We offer to undertake the supply of _________________________ and quoted the rates 

inclusive of all taxes, freight etc., as given in Appendix-II. It is agreed that no additional 

charges other than those mentioned in Appendix-II would be payable to me/us. 

4. I/We accept that the rates offered shall remain valid up to 31/03/2014. I/We further 

agreed that if the date up to which the offer would remain open be declared as holiday 

for office, then offer will remain open for acceptance till next working day. 

5. I/We shall be bound by communication of acceptance of the offer, dispatched within 

prescribed time. 

6. I/We accept that the right to accept or reject whole or part of the tender without 

assigning any reason is reserved with the University. The decision of the University will 

be final and shall be binding on me/us. 

7. As required by the terms and conditions of tender an amount of Rs.________(1% of the 

estimated cost of tendered items of Appendix-II) paid by me/us as Earnest Money 

Deposit (E.M.D.) through Demand Draft (DD) of any Nationalized Bank payable at 

State Bank of India, Dr.P.D.K.V., Akola Branch No.2171, Akola bearing 

No._______________ dated ___________ in favour of The Assistant Registrar, College of 

Horticulture, Akola “ Payment of EMD in any other form will not be accepted”. 

8. I/We agreed to undertake to supply the tendered items at office locations under 

jurisdiction of the University mentioned in final supply order and as per the 

Tender Items Dr.PDKV Akola – 2012-13 Last Date of Tender 06/02/2013

specification of the final orders within one month from the date of supply order or the 

date specified in the supply order. 

9. As per the terms and conditions of Part-I of Appendix-I, I/We are submitting my/our 

offer in two sealed envelopes enclosed in envelop No.3. Envelop No.1 contains technical 

bid as per the condition Sr.No.9 of Part-I of Appendix-I and Envelop No.2 contains 

financial bid as per Appendix-II. 

10. I/We also agreed that University has full rights to open/consider the Envelop No. 2 if 

and only if University is satisfied with information in Envelop No.1. The decision of the 

University regarding this will be final and will be binding on me/us. 

11. I/We hereby declare that the entries made in this tender form, i.e. in Part II of 

Appendix-I and Appendix-II are binding on me/us. I/We shall be bound by the Act to 

my/our authorized representative duly constituted Attorney Sh. _______________ whose 

signature is appended hereto in the place specified for the purpose and of any other 

person who in future may be appointed by me/us in his place to carry on the business 

of this concern/agency/firm. The intimation of such change will be given to the 

Chairman, CPC, Dr. PDKV, Akola. 

12. I/We hereby take the responsibility of maintaining the tendered items at their locations 

at free of cost in warranty period. I/We hereby take the responsibility to provide the 

services under AMC after expiry of warranty periods. 

The following documents duly filled in and signed are enclosed along with the 

tender. The part one of Appendix-I being the terms and conditions is retained by me/us 

for my/our information and record. 

Place : 

Tender Items Dr.PDKV Akola – 2012-13 Last Date of Tender 06/02/2013 

Yours faithfully, 

Date : Signature of the Supplier 

Capacity in which signing :______________________________________________________________ 

Name and Address of the firm/supplier/tenderer: _______________________________________ 

Registration No. of Supplier/tenderer: __________________________________________________ 

List of Documents (Checklist) 

i) Tender Form 

ii) DD for Rs. 1000/- towards cost of the tender form 

iii) Demand Draft (For EMD) 

iv) Sale Tax Registration certificate /Sale tax return certificate 

v) Original catalogs, pamphlets/pictures of the tendered items offered 

vi) Certificate of Sole Manufacturers/authorized supplier/ dealer 

vii) Photocopy of exemption certificate for EMD with list of exempted items (If applicable) 

viii) Part II of Appendix -I 

Date:____________________ 

Signature of constituted Attorney/ 

Authorized representative 

Name & Address:__________________________________

APPENDIX-I 

TERMS AND CONDITIONS 

FOR SUPPLY OF 

“ I) LABORATORY INSTRUMENTS / EQUIPMENTS, II) FURNITURE, III) STATIONARY, 

IV) CHEMICAL/ GLASSWAERES/ PLASTICWARES AND V) FURTILIZERS 

VI) INSECTICIDES/ FUNGICIDE/ WEEDICIDE” 

PART-I 

1. Separate sealed tenders are invited for supply of “ LABORATORY INSTRUMENTS / 

EQUIPMENTS, FURNITURE, STATIONARY, CHEMICAL / GLASSWAERES / 

PLASTICWARES, FURTILIZERS AND INSECTICIDES/ FUNGICIDE/ WEEDICIDE” 

from manufacturers/authorized dealers of manufacturers/ authorized 

suppliers/dealers, who are willing to undertake supply of tendered items as per the 

specifications mentioned in Appendix-II . The last date for the receipt of the 

tender will be 06/02/2013. The tenders received late in person/by post will 

not be considered. The tenders will be opened on 07/02/2013, 11.00 hrs in 

the office of The Head Department of Horticulture, Dr. PDKV, Akola in 

presence of the intending suppliers/ representatives who may desire to attend. 

2. The rates both in words and figures without any corrections or over writing should 

be quoted in Appendix-II for each individual item separately. Any over writing or 

rewriting should be duly countersigned. The rates must be valid up to 31 st March, 

2014.31/3/2007. 

3. The intending supplier shall also have to mention, the detailed specifications, name 

of manufacturer/make, model of the article and has to enclose the catalogs, 

pamphlets/pictures of the appliances offered, for which the rates are quoted. In 

absence of the above documents, the item(s) offered will not be considered. 

4. The preference will be given to the items bearing ISI/ISO quality control make 

for the tendered items. 

5. The tenderer must enclose adequate documents to prove their authorization claims, 

the authority letter should include the details of principal 

supplier/manufacturer regarding their full address, contact person, e-mail 

address, fax no. and address of the website and if not enclosed, the University 

reserves the rights to accept or reject tender. The decision of the University regarding 

this will be final and shall be binding on tenderer. 

6. Tenderers will have to supply tendered items as per the Appendix II. University will 

not accept the assembled items. 

7. The tenderer should quote the rates inclusive of essential/optional accessories of all 

charges in Appendix II only in the prescribed form enclosed with tender form and not 

in any other form. 

8. Installation, successful demonstration of tendered items in the respective 

department is obligatory. 

9. The tenderer should submit his offer in two separate envelopes i.e. in first envelop 

with superscription “TENDER FOR SUPPLY OF “ LABORATORY INSTRUMENTS / 




(TECHNICAL BID) ENVELOPE No. 1 

a. D.D. for Rs. 1000/- (Rs. One Thousand Only) as cost of tender form. 

b. D.D. for E.M.D. (should be 1% of the cost of Total Tendered Item(s) in case of EMD 

exemption relevant certificate along with list of exempted items be enclosed). Bear 

certificate will not be considered. 

c. Sale Tax (CST, BST, VAT etc.) Registration certificate/ Sale Tax Return certificate/ 

Income Tax Returns. 

d. Catalogs, pamphlets/pictures of the items offered. Documents in support to reveal 

capacity to provide service after sale 

e. Certificate of Sole Manufacturers/authorized dealers of 

f. 

manufacturers/authorized supplier/dealers. 

Clients/ Users list of item(s) of Company/Dealer and total experience in this field 

(if applicable). 

(Important: If any of above documents is not enclosed, the Envelope No. 2 will not be opened) 

10. The tenderer should provide the rates quoted only in Appendix-II in Envelop No. 2 

with superscription ‘FINANCIAL BID”. 

11. Tenderer should enclose sealed Envelope No. 1 and 2 in Envelope No. 3 with 

superscription “TENDER FOR SUPPLY OF “ LABORATORY INSTRUMENTS / 



and be submitted to The Chairman, CPC, Dr. PDKV, Akola (M.S.). 

12. The intending supplier should quote the rates inclusive of all expenses, charges, 

taxes, duties, transportation, packing and forwarding, insurance etc. i.e. All 

“Inclusive” (in the prescribed format enclosed with this tender form) with free 

delivery as mentioned in Appendix-II at respective office/ laboratories of the 

University. However, the Octroi will be over and above this, if applicable. The 

tendered items will have to be supplied as per the specifications within ONE MONTH 

or as per the last date mentioned in the final supply order. In case the tenderer 

requires more time than as stipulated above for effecting actual supply of a 

particular item shall specifically mention in the tender form. 

13. The University will reserve full rights to open/consider the Envelop No. 2 if and only 

if the University is satisfied with information contained in Envelop No.1. The 

decision of the University regarding this will be final and shall be binding on 

tenderer. 

14. The supplier will have to supply, in full the tendered items as per the order to 

different offices/ laboratories of the University located any where in University 

jurisdiction till date of validity of rates. 

15. This University have exemption in octroi, excise duty & custom duties, the 

certificates will be provided along with the supply order if necessary. 

16. The tenderer shall have to deposit Earnest Money Deposit (E.M.D.) @ 1 % of cost of 

tendered items through Demand Draft (Nationalized Bank only) drawn on State 

Bank of India, Dr. PDKV, Branch Akola (Branch No. 2171), payable to The 


Assistant Registrar, College of Horticulture, Akola, and the same should be 

enclosed in Envelope No.1. The tender without E.M.D. or less E.M.D will not be 

considered. If the tenderer is having exemption for EMD for specific item, he should 

enclose the copy of the certificate along with list of items and be produce original for 

verification on the date of opening of the tender or within a week period thereafter. 

The amount of E.M.D. will be refunded in case of unsuccessful tenderer on 

submission of application with Money Receipt in original soon after the final 

decision. In case of successful tender it will be refunded on production of original 

receipt after completion of validity period of the agreement to be executed between 

the tenderer and the University. The University will not make any payment towards 

interest on such deposits. 

17. The Specimen of “Agreement Bond” will be provided along with letter of acceptance 

to the tenderer whose rates are accepted by the University. The tenderer shall have 

to execute agreement in the prescribed form on judiciary paper costing to Rs.100/or 

fixing court fee stamp on agreement paper, which should be submitted to 

respective office ordering supply within specified time. The agreement received 

under seal and signature of tenderer will become legal agreement between the 

tenderer and the University, which will be binding on tenderer within Akola 

jurisdiction. 

18. The tenderer at the time of final order/ agreement will have to furnish security 

deposit @ 3% of total cost of the items accepted and ordered for supply by the 

University as offered in the tender only by demand draft of any Nationalized Bank in 

favour of the concerned office, Dr. PDKV, Akola. 

19. The amount of security deposit without any interest there on will be returned to the 

tenderer after 12 months or the expiry of the warranty period whichever is later from 

the date of supply, subject to the surrender of money receipt in original in respective 

office. 

20. If the tenderer fails to comply with the supply order within the specified period his 

order will be cancelled and EMD will be forfeited. 

21. The quantity mentioned in Appendix-II of this tender is subject to variation 

according to actual requirement of this University. The quantity may vary in case of 

competitive market rates. The right to enhance or reduce the quantity of any 

tendered item(s) and right to accept/reject whole or part of the tendered items, 

without assigning any reason, whatsoever, is reserved by the University. The 

decision of the University shall be final and it shall be binding on the tenderer. 

22. On the acceptance of the rates as per the approved tender, the supply order will be 

placed by respective Head of the Office of the University. 

23. As soon as the tenderer delivers the tender in the office of the undersigned, it shall 

be binding on him and he shall not be able to withdraw or amend the offer. 

24. The respective Head of the offices also reserves the right to accept or reject the 

supplies in full which do not strictly stick up to the specifications. 

25. The tenderer are bound to supply only genuine tendered items of the 

make/model/specification etc. tendered by him/it and ordered for supply by the 

University/offices under it shall be liberty to ask for production of sufficient proof 

that the manufacturer is rendering adequate business support to the 

tenderer/supplier or University will have the right to get satisfied approaching the 

manufacturer without noticing to the tenderer for genuineness of tendered items and 

authority to supplier. 


26. The University reserves the rights to accept or reject higher version of tendered items 

under the same terms and conditions and same price quoted by tenderer in 

Appendix-II. 

27. In case of poor response from the suppliers, from the first call, the items of poor 

response will be retendered if necessary 

28. Final payment of tendered items will be made only after supply/installation and 

successful demonstration at the respective department of the University. 

29. The credit bill should be submitted in triplicate in the name of respective authority 

as quoted in final supply order. For any delay in payment, the University will not 

make any extra payments towards interest or any other kind of compensation. This 

will be governed as per terms and conditions mentioned above and agreement 

made as per the provisions in M.A.U. Account Code, 1991. Delay in supply 

within the prescribed time limit or the extended time limit, making of supplies not 

up to the standard specification and performance or non-observance or nonacceptance 

of these terms and conditions by the tenderers shall constitute breach of 

agreement and the security deposit or any other deposit of the tenderer shall be 

forfeited by the University besides other actions or reduction bills of supplies and/or 

other legal actions and the final decision of the University shall be binding on the 

tenderer. 

30. Every page of the tender should be numbered and signed with seal by the tenderer. 

The right to accept or reject whole or part of the tender or all tenders without 

assigning any reasons thereof is reserved by the University. 

31. The University will initiate the legal action against the firm/company/ supplier, if 

the supplied tendered items are found of poor quality /not as per the 

specifications/non supply of tendered items, the Firm/Company/ Supplier will be 

blacklisted by the University. 

32. In case a supplier supplying the no. of items to a single department, the single 

agreement bond shall be legitimate, but 3 % security deposit should be given for 

each item supplied. In case supplier fails within stipulated time period to supply the 

materials, the concern firm will be block listed. 

33. Specific terms and conditions (in addition to above) for supply of chemicals, 

glasswares, plasticwares, media and filter papers. 

a. Tenderer shall have to deposite EMD of Rs. 10,000/- (Ten Thousand Only) 

through Demand Draft (Nationalized Bank only) drawn on State Bank of 

India, Dr. PDKV, Branch Akola (Branch No. 2171), payable to The Assistant 

Registrar, College of Horticulture, Akola. 

b. The requirement of chemicals, glasswares, plasticwares, media and filter 

papers depends upon analytical works carried out by researchers. Hence the 

agreement shall be complete range of products of manufacturers and 

purchase shall be effected as per requirement at particular place. 

c. Specific Appendix II for this purchase( Enclosed with tender form). 

Encl: 1) Part-II of Appendix-I 

2) Schedule of supplies in Appendix-II 

Place: Akola 

Sd/- 

Chairman 

Central Purchase Committee 

Dr. Panjabrao Deshmukh Krishi Vidyapeeth, 

P.O. Krishi Nagar, Akola 444 104 (MS.) 


Part-II 

Undertaking to be given by the tenderer for “The supply of tender items” 

Whereas, The Chairman, Central Purchase Committee, Dr. P.D.K.V., Akola has 

called the tenders as per the enclosed Appendix II. 

I/We hereby offer our tender at the rates given in the enclosed Appendix -II duly 

filled in and signed by me/us and hereby also affix my/our signature(s) below this tender 

voluntary and full acceptance of all the terms and conditions of this tender, which shall be 

the agreement between the above tender calling authority and myself/us. 

Enclosed: Appendix-II 

Place: 

Date: 

Signature of the Supplier:______________________ 

Name of the Supplier : _________________________ 

Capacity in which signing :_____________________ 

Full address of the Supplier with Seal/Stamps 


Sr.No. Name of item with 

essential 

accessories 

Appendix II 

Format for quoting the rates of the Tendered Items 

Specification Accessories 

a) Essential 

b)Optional 

1 a. 

b. 

2 a. 

b. 

3 a. 

b. 

Basic 

Cost 

( ) 


Excise VAT/ CST/ BST Custom Duty Total Cost 

If the specification mentioned by the tenderer is deviated from the specification proposed by the University, tenderer have 

to give compliances in prescribed format given below. 

Information regarding specification compliances 

Name of tenderer: ______________________________________ 

Sr. Sr. No. & Name of 

item included in 

tender enquiry/form 

Proforma 

Specification/part of specification 

given in the tender form of the 

University for which tenderer has 

offered differently 

Specification/part of 

specification that the 

tenderer has offered 

differently 

How the different 

specification is suitable for 

the intended use by the 

University

APPENDIX-II 

I) LIST OF LABORATORY INSTRUMENTS/EQUIPMENTS 

Sr. Name of 

Specification 

No. equipment/instrument 

1 Stereo Zoom 

FWD Factor (mm): 81 

Microscope with Magnification: 10x-80x 

camera and camera 

adapter 

Object Field (mm): 23,0 … 2,9 

Variable diopter setting: ±5 

Transmitted light illumination with LED 15V, 150W 

Fluoresce and coaxial illumination 

Digital Microscopic camera: 

Preferably Carl Zeiss 

5mp 

2 Stereoscope Magnification range from 1.4x to 200x 

Quick change tubes, Rotable 180deg, Stand with 300mm clumn with all accessories 

Preferably Leica make wild M5 

3 Builtin Projector 

HD Video Codec MPEG4-AVC/H.264 

SD Video Codec MPEG2-PS 

Media Storage Type Memory Stick PRO Duo (Mark2) / PRO-HG Duo / 

SD/SDHC/SDXC Memory Card 

HYBRID Movie Recording on Memory Stick and SD/SDHC Memory 

Card 

Image Sensor 1/3.91 "Exmor R" CMOS Sensor 

Filter Diameter 37mm 

Optical / Digital Zoom 30x / 350x 

Audio Format Dolby Digital 5.1ch, Dolby Digital 5.1Creator / Dolby 

Digital 2ch Stereo, Dolby Digital Stereo Creator 

Zoom Mic Yes 


Maximum Still Image 

Resolution 

8.9 Mega Pixels (3984 x 2240, 16:9) 

Image Stabilisation Optical Steady Shot (Active mode - Wide to Tele) 

LCD Screen Size & Type 

Preferably SONY make 

3.0 (7.62 cms) Clear Photo LCD display 

4 LCD Projector Resolution XGA/SVGA ≥ 800 x 600 

Illumination ≥ 2000 

Contrast Ratio 2000:1 

Aspect Ratio ≥ 4:3 

Life of Lamp In Eco Mode (Hours) ≥ 4000 

Input type USB/VGA 

Preferably Sony, Panasonic, Benq 

5 Gel Doc System Camera Resolution 2.0 million pixels 

Image depth 12/16 bit 

Grayscale 65536 

Dynamic range 4.8 

Lens F1.4 Motor driven zoom 

Cooling Low level cooloing for extended fluorescence 

Filter wheel Motor driven with UV orange filter 

UV transilluminator 20cm x 20cm 

6 Microscopes 

UltraBright-LED Blue 20cm x 16cm 

White Epi over head with all standard accessoriesEF 

Preferably Syngene make 

GB Pathological Laboratory Microscope, Body-Monocular die cast body with graduated drawtube, 

inclinable upto a horizontal position (90 0 ), Magnification-100X-1000Xx(1500x) Optional Eyepieces 

widefiled 15x, Huygenian 5x, 10x & 15x 

Preferably Olympus make 

7 Microscope Head: 45°Inclined 360°swiveling trinocular 

Nosepiece: revolving quadruple 

Eyepieces: wide field WF10X and P16X 

Objective: achromatic DIN 4x, 10x, 40x(S), 100x(S, Oil) 


Total magnification: 40x-64x-100x-160x-400x-640x-1000x-1600x 

Transmitted (lower) illuminator: 6V/20W Halogen 

Stage: mechanical double layer size: 5-1/2" x 5-1/2" (140mm x 140mm) 

Stage x-y stroke (travel range): 3" x 2" (75mm x 50mm) 

Photo tube adjustment range: 3/4" (18mm) 

Focus adjustment: Coaxial coarse & fine knobs on both sides 

Focusing knob can be locked for observation & transportation 

Condenser & diaphragm: NA1.25 Abbe condenser with iris diaphragm 

USB camera resolution: 640x480 with built-in lens 

Platform compatibility of camera: support Windows XP, Windows 7 32/64bit 

Camera adapter: 23.2mm-30mm or 30.5mm 

Power supply: 220V~240V, 50Hz 

8 Microscope Magnification: 10 - 1500X 

Optical system: CFI60 Infinity Optical System 

Coarse/fine focusing: Fine: 0.1mm per rotation, Coarse: 13.8mm per rotation, 

Minimum reading: 1µm; Coarse motion torque 

adjustable, Refocusing function (with stopper) 

Illumination: 6V-30W halogen lamp, 100-240V (worldwide voltage) 

Built-in filter: ND8 

Eyepiece tube: Binocular tube B (for F.O.V. 22mm); Trinocular tube "F" 

UW (for F.O.V. 22mm/25mm, observation/photo: 100/0, 

0/100); Trinocular tube "T" UW (for F.O.V. 

22mm/25mm, observation/photo: 100/0, 20/80, 0/100); 

Ergonomic binocular tube (for F.O.V. 22mm, 

inclination:10-30°, extension: 40mm); DSC port: 100/0, 

50/50 (optional) 

Eyepiece lens: 10x (F.O.V.: 22mm), 10x M photo mask (F.O.V.: 25mm), 

12.5x (F.O.V.: 16mm), 15x (F.O.V.: 14.5mm), UW 10x 

(F.O.V.: 25mm), UW 10x M photo mask (F.O.V.: 25mm) 



Nosepiece: Sextuple nosepiece; Ergo-View cytodiagnostic unit 

(Motorized changeover 10x to 40x with hand switch, 

Stamp type marking 

Stage: Super-hard Alumite coated surface, Stay-in-position stage 

handle, Stage handle height and tension adjustable, 

Rectangular 159 x 243mm surface stage, 78 x 54mm 

cross travel (x-y movement), 1-slide or 2-slide specimen 

holder available (option) 

Condenser focusing 27mm 

stroke: 

Intermediate accessories: Epi-fluorescence illuminator (4 filter 

positions), Magnification module, Eye-level riser, Double 

port, Teaching head 

Observation method: Brightfield, Epi-fluorescence,Darkfield, Phase contrast, 

Simple polarizing 

Enabled Digital Sight camera to capture the specimen 

image 

Preferably Nikon make 

9 Student Microscope Straight tube inclinable through 90 0 , illumination controlled by its diaphragm, complete with Achromatic 

10 Microtome Cryostat 

Automatic (Deluxe 

Model) 

objectives : 45× & 10 x and Huygenion eye pieces : 15x & 10x 

Hand Wheel/Sectioning 

Operation: 

Manual 

Retract/Advance Method: Electric via Stepper Motor 

Section Thickness Range: 1 to 60 µm 

Specimen Feed: 25 mm 

Specimen/Knife Stroke: 59 mm 

Trimming Section Thickness: Course Feed, 0.8 mm/sec 

Chamber Temperature Range: 0 to -35 C 

Specimen Cooling Temperature -10 to -50 C

Range: 

Quick Freeze Shelf: -45 C 

Peltier Plate: 0 

Defrosting: Programmable 

Provided with solid state temperature controller cum digital indicator maintained within ±2 0 C offset temp., 

Automatic defrosting system, Delay timer, four demountable specimen holder, one bottle low temp. oil, one 

microtome knife 120 mm long. 

Preferably Leica make 

11 Batteries 12V, 150AH, Exide make 






17 Tubular battery 150/200/ IT-500/ST-500 (Exide make) 

18 Inverter 1400, 2500, 3500 and 5000VA ,Sine wave 

19 Field Scout Soil 

Compaction Meter 

20 Root Scanner 

Preferably Microtek, Genus make 

Measurement Units: Cone Index (PSI or kPa) 

Resolution: 1 in (2.5 cm), 5 PSI (35 kPa) 

Accuracy: ± 0.5 in (1.25 cm) Depth, ±15 PSI (103 kPa) Pressure 

Range: 0 to18 in (0 to 45 cm), 0 to 1,000 PSI (0 to 7,000 kPa) 

Data Logger Capacity: 700 profiles without GPS; 500 profiles with GPS 

Preferably Spectrum Technologies Inc. make 

Scanner Resolution – 188 million pixles, One Image size – 21.59 x 19.56 cm, Scan speed – 5-15 seconds, 

Scan Head – 34.3 x 6.4 cm, Std. Clear tube dimensions – 6.4 x 182.9 cm, Storage memory – 40 GB HDD 

(or latest), weight – 1.0 kg along with all the accessories including scanning software, lap-top 

computer(latest) and carriers, Optional set of head assembly, drive head pin, slide hammer, soil ture bit 

and solid soil tube and CI-600-TU-6 Plexi glass clear tube etc. 


Preferebly CID Inc., USA 

21 Pressure plate and 5 bar extractor, 15 bar extractor, A pressure regulating manifold, A pressure source (compressor), 1 Bar, 

membrane apparatus 3 Bar, 5 Bar and 15 Bar ceramic plates. (4 each). Soil moisture Equipment Corp. CA, USA 

22 Soil Moisture Meter Gopher-portable-soil-moisture-profile-probe 

2x PVC access tubes (15mm Class 15 PVC pressure pipe) 

2x PVC access tube top end caps 

2x PVC access tube bottom plugs 

1x Gopher® data recorder 

1x Micro-Gopher® sensor head 

1x Micro-Gopher® staff 

1x access tube installation kit 

1x set 4xAA batteries 

1x RS232 cable 

1x fabric carry case for data recorder 

1x PC software set 3 disks (all future upgrades free) 

1x training video or CD 

23 Steady state Porometer Relative Humidity 

Sensor: Vaisala HUMICAP (thin-film capacitance type). 

Temperature Coefficient: ±0.05% per ºC. 

Response Time: < 1 second at 20ºC. 

Recommended Operating Range: 20-80% RH. 

Leaf Temperature: Chromel-constantan thermocouple,0.051 mm Dia. (0.002”). 

Cuvette Temperature: Linearized thermistor. 

Flow Measurement: Thermal-sensing mass flowmeter, temperature compensated. Three stages (autoranging) for a 

range of ≈ 0.001 to 16.7 standard cm 3 per second. 

Output: Direct RS-232 connection to PC or optional 1600-10 Storage Module System; 300 Baud. 

Sensor Head Attachments: 

Standard Broadleaf Aperture, 1600-01 Narrow Aperture, 1600-02 Square Chamber, 1600-06 Small Aperture: 

Nickelplated aluminum aperture caps with clear acrylic matching clamps. 1600-07 Cylindrical Chamber: Nickelplated 

aluminum construction for low moisture absorption. 

Display: Full 4-digit liquid crystal display (LCD). 


24 Photosynthesis system 

Desiccant: Two stage desiccant (indicating silica gel). 

Power Requirement: Rechargeable 6 V sealed lead acid battery; or 92-138/184-276 VAC, 50 to 400 Hz, 25 watt 

maximum. 

Battery Capacity: 6 to 8 hours continuous operation at 25ºC., Low battery indicated on the display. External jack 

for connecting an additional G811 battery. 

Recharging Time: 12-16 hrs., instrument non-operating. Charging circuitry built-in. Battery can be charged 

during AC operation. 

Battery Voltage Sensor: Automatically shuts instrument off before battery is completely discharged. 

Operating Conditions: 0º to 50ºC, 0-95% RH (noncondensing). 

Storage Conditions: -20º to 55ºC, 10 to 80% RH (noncondensing). 

Readout-Control Console 

Size: 14.5 H × 25.4 W × 15.0 cm D (5.7” × 10.0” × 5.9"). 

Weight: 4.6 kg (10.2 lbs). 

Sensor Head 

Cuvette: ≈50 cm 3 (3.1 in3). Nickel-plated aluminum for low moisture adsorption. 

Outer Cylinder: 6.3 cm Dia. × 11.5 cm L (2.5” × 4.5”). 

Preferably Li-Cor make 

Main System 

Main Unit: On board IRGA for CO2 / H2O Analysis, Flow Control, Display and 

Key Board, Leaf Chamber attachment facility and Battery. 

Display: LCD 40 x 6 characters or 320 x 60 pixel 

Data Storage: 4 MB Internal FLASH RAM 

Data output: USB or RS232C PC Link Cable 

Flow Rate: 100 ~ 1000 cm 2 min-1 (1 lpm) 

Power supply: 7.2 VDC, 3.2 mAh for 5 hours continuous use, extended hours of use 

with additional batteries. AC Adapter / Battery Charger supplied. 

Weight: 1.5 Kg (3 Lbs) with Battery 

Dimension: 450 mm x 53 mm x 48 mm 

CO2 Analyzer 

Sensor: Low power Non-Dispersive Infrared Gas Analyzer 

No sensitivity to motion, Stable analyzer for accurate 


CO2measurements 

Chopping frequency: 1Hz 

Sensors response time: 35 seconds 

Source life: 5000 hours 

Measuring Range: 0 to 2000 ppm (Standard) - 0 to 3000 ppm (Optional) 

Resolution: 0.1 ppm 

Repeatability: ±0.1 ppm (short term) 

Accuracy: < ± 2% up to 3000 ppm 

Sample cell: 100 mm x 10.2 mm (3.94” L x 0.40” Dia) 

Warm- up time: Approximately 3 minutes 

H2O Analyzer 

Sensor Type: Humidity Sensitive Capacitor 

Stable Analyzer for accurate H2O measurements 

Measuring Range: 0 to 100% 

Resolution: 0.10% 

Accuracy: ±2% at 10% RH, ±3.5% at 95% RH 

Response time:

Preferasbly CID Bioscience make 

25 Top pan analytical 

balance 

300 gm cap, accuracy 0.01gm Preferably Ana/Citizen make 

26 Electric weighing 

balance 

500 gm cap, accuracy- 0.001 gm with wind shield Preferably Citizen/Contech make 

27 Weighing Balance Capacity 5000g, Accuracy +/- 0.1g, , Upgrade attachment weights 

28 Weighing Balance 5 kg capacity, Auto calibration, Backlight LCD Display for easy viewing 

29 Electric weighing 

Balance 

Table Top High Precision Electronic Balance with Milligram resolution, 500 gram capacity, Auto calibration with 

wind shield. 

Preferably Citizen make 

30 Hydrometer 1) Specific gravity range 0.995-1.038 

2) Specific gravity range -5 to +60 g/L,with g/L divisions 

31 Oil free vaccum pump 

32 Water cooler 

33 Water purification 

system 

Conform to ASTM Specifications 

Power rate 190 watt. Max current- 1 A, max vaccum- 650 mm Hg- 85.5 kpa=110 torque, motor rotation- 

1450 RPM, HP- ¼ HP, noise level-52 dB 

Preferably Rocker make 

≥ 40 lit cap. 

Preferably Blue star make 

Type Water store type 

Purification Reverse Osmosis and UV Filtration 

Capacity ≥ 10 lit. 

Preferably Kent/Reliable make 

34 Shaking machine Size 24x24 in 

Preferably Remi make 

35 Mechanical sieve 

shaker with sieve & 

drum 

Wet sieve shaker (Yoders type) with set of sieves with motor 


34 Water distillation app. 

(Steel) 

Electrically heated distilled water plant, capacity 25 lte/hr. 10.0 KW, automatically cut off device 

36 Laminar Air Flow Horizontal, Prefilter, HEPA filter with 99.99% efficiency, 100 class, Grill protection to filter, UV light, 

Cabinet 

Fluorescent light, Manometer with digital display, MS-steel powder coated body work efficiency built in 24 hrs 

clocks, SS 304 grade Work top with Size- 4’x2’x2’ (LxWxH) 

37 BOD Incubator Temp. range 5 to 60°C ±1°C 

Microprocessor based digital PID Controller with thermostat, safety alarm system 

Heating system- U-shaped SS Nichrome wire air heater. 

Inner SS body and Trays, Outside MS powder coated , 3’’ thick PUF insulation between inner outer 

body. 

38 Refrigerator Indian make 

Capacity- 190/210/230 L, Temp. 5°C , + 0.5°C 

Single/Double door 

Preferably Whirlpool, LG, Samsung, Blue Star 

39 Deep freezer Capacity- 190L, Temp. -20°C , + 0.5°C 

Single/Double door 

Preferably Blue Star make 

40 Polariscope Input: 220-240V 50 Hz, single phase A.C 

High resolution camera 

Pick & place feature 

42 Seed Germinator Cabinet type, Single chamber, 

Size 715X780X1550mm (LxBxH), SS Inner body with 14 trays, inner chamber made up of thick SS and 

outer powder coated Temp. 10 to 40 , + 1 , Humidity 90 + 5%, Thermostat with 

43 Air conditioner 1.0/1.5/2.0 t capacity, split type 

Preferably LG, Whirlpool, Heir, Blue Star 

48 Digital water bath Temp. range ambient to 100 + 0.1 microprocessor based PID indicator and controller, Size 

49 UV-Spectrophotometer 

430X240X265mm, double walled chamber , inner made up of thick SS and outer powder coated, 

OPTICS 

Double beam optics, Modified Czerny-Tuner Monochromator geometry for better aberration correction. 


Holographic diffraction grating with 1200 lines/mm blazed at 250 nm. 

CONTROL 11 CONTROLLER BASED 

WAVELENGTH 

Range 200to 1100nm 

Accuracy ±0.5nm 

Repeatability ±0.2nm 

Resolution 0.1 nm 

Bandwidth 2.0nm 

PHOTOMETRIC 

Range ±2.5Abs 

Accuracy ±0.005 Abs at 1.0 Abs 

Repeatability ±0.002 Abs at 1.0 Abs 

STRAY LIGHT < 0.05% Tat 220 nm and 370 nm 

BASELINE CORRECTION Automatic Baseline correction 

BASELINE FLATNESS Within ±0.003 Abs (excluding noises) 

SCAN SPEED Slow, Medium & Fast 

DATA INTERVAL Depends on wavelength scan range andscan speed, Minimum possible 0.1 nm for 

slow, 0.2 nm for medium and 0.4 nm for fast scan speeds 

SAMPLE HOLDER 5-position automatic positioning for 10 mm Sample cuvettes and 1 fixed position 

for 10 mm Reference Cuvette 

SOURCE 

1) Tungsten-Halogen lamp,(Preferred usage 320 nm to 1100 nm) 

2) Deuterium lamp (Preferred usage 200 nm to 340 nm) 

DETECTOR Two Photo Diode 

MEASURING MODES 

1) Absorbance 

2) % Transmittance 

3) Concentration (K factor, Multi standard) 

4) Multi Component Analysis 

OPERATING MODES 


1 ) Single Wavelength 

2) Multi Wavelength 

3) Scan 

4)Time Scan 

ORDER CUT-OFF FILTER Four glass filters, automatically positioned to eliminate grating spectral 

order interferences 

AUTOMATIC CALIBRATIONS/OPTIMISATIONS 

1) Base line calibration 

2) Source optimisation 

3) Cell optimisation 

4) Wavelength calibration 

5) Electronic calibration 

DATA PROCESSING 

1) Peak PickNalley pick 

2) Zoom (Expansion) of Spectra 

3) Derivative 

4) Averaging of two scans 

5) Subtraction of two scans 

6) Smoothening of spectra 

DATA PRESENTATION 

Display of graphic and tabular data on Graphics LCD (320 x 240 Pixels), hard copy of graphs and data on 

printer. 

DATA STORAGE 

For each operating mode five user defined files can be stored using memory backup. For each mode one 

default file which stores last readings taken 

PRINTER PORT Compatible to Laser Jet/Ink Jet/Dot Matrix 

PC Link data transfer RS232PORT 

POWER 220-230V ± 10%, 50 Hz 

50 Electrophorosis Unit Type: Horizontal and Vertical (both separately) 

No. of samples: 8-26 well 


51 Digital conductivity 

meter 

52 Chlorophyll Content 

Meter 

Gel size: 13x13 to 20x30 cm 

Material: Acrylic 

With appropriate inner tank dimensions and 3 No. of trays, 3Combs, 2gel casting tray and1 lid, etc. 

Range 0-20 MS/CM in 2 ranges, accuracy + 0.05%, Resolution : 1is/CM, OSCILLATOR 1 Khz in built, 

Cell constant : 0.2 to 1.8 adjustable direct of digital display 

Preferably Systronic make 

53 Leaf Area Meter Resolution: 1 mm 2 

Measured Parameters: Optical absorbance in two different wave bands: 653nm (Chlorophyll) & 931nm 

(Near Infra-Red). 

Measurement Area: 9-10 mm diameter 

Resolution: 1CCI Unit 

Repeatibility: ±1% 

Source: Custom 2 wavelength LED module 

Detector: Silicon photodiode with integral amplifier for absorbance measurement, power monitoring, and 

temperature compensation. 

Storage Capacity: 8 Mbyte of memory for up to 160,000 data measurements 

Data Modes: Single point, user selectable from 1-30 point averaging, and a statistical 10-30 point 

protocol that asks to replace data points beyond a 2 sigma standard deviation. 

User Interface: Higher pixel graphic display, beep signals,keys for: setup, measurement protocols, 

diagnostics, data control and user input of alphanumeric comment lines. 

Input/Output: USB & RS-232; multi-point file output, single point out on demand, NMEA 0183 

compliant 

Temperature Range: 0-50 Deg C 

Temperature Drift: Temperature compensated source and detector circuitry for minimum drift over full 

range. 

Accuracy: Within ± 2% 

Display Capacity: Area: 9,999,999.99 cm 2 , Length: 99,999,999.9 cm, Width: 12.8 cm. 

Display: LCD 

Real Time Clock: Year, month, day, hour, minute, second. Accuracy: ± 3 minutes per month Internal Memory: 

More than 2.0 MB 


Memory Capacity: up to 125,000 individual leaf area measurements. 

Communications: USB 

Scanning Speed: Up to 1 m/s. 

Preferably LI-COR make 

55 Olfactometer The operant box: including reinforcement dispensers, an odor delivery port with an infrared presence 

beam, three water delivery port, a light and auditory stimuli module and a shock grid, outlined in brown 

below. 

The electronic unit: for management and automation, outlined in red below. 

The reward system unit: for distribution and calibration water reward, outlined in green below. 

The software interface: for data collection (the software generates files of experience that can be easily 

exported to a database for analysis) and online behavior monitoring. 

56 Automated Spray 

Droplet Analysis 

System 

The pulse generator: for generating various stimuli. 

Rapid automated analysis of thousands of individual particles 

- Detect particles as small as 0.5 micron 

- Compliance to FDA 21 CFR Part 11 standards 

- Custom built analysis routines to handle specific sample types 

- Detect and classify particle types on the basis of size, shape, color 

- Optional Sample preparation unit. 

Preferably Expert vision India Pvt. Ltd. 

57 Khoa Making Machine 15 lit. Capacity, Diesel operated, complete as per makers standards. 

Preferably Solar Ark make 

58 Cream Separate Capacity of Tank 10 lit. 

Machine 

As per makers standard with both hand and Electrically operated 

Preferably Kamdhenu make 

59 Sealing Machine Electrically operated sealing machine to seal plastic pouches 

60 Cooler Tanks 50 lit capacity fiber cooling tanks 

for storing/transporting milk, 

flavoured milk, small pouches bottles, etc. 

61 Paneer Press Standard Stainless steel Paneer press with 5 and 10 kg capacity molds. 

62 Hand Refractometer 0-32%, 28-62%, 58-92% It is light instrument for field and laboratory use for measuring the sugar 


63 Bulk Density 

Apparatus 

concentration on cane sugars, fruits, syrups, jams, cola and liquidcomplete in leather cases. 

Ring blade type, 135 mm funnel size, 5 kg/lit sand bottle capacity & ± 5 gms electronic balance 

calibrations. 

Preferably Weiber’s or its equivalent 

64 Digital Dynamometer 0-200 kg, 0-1500kg with digital display unit, selectable in lb, kg & newtons, accuracy: within ±0.1 % 

F.S., resolution 1 part of 5000 enhanced, safety factor for aluminium 7:1 & for steel 5:1. 

65 Fuel consumption 

Preferably Dillon make or its equivalent 

Measurement range 5 to 1000 ml, digital display, suitable to fit to fuel supply tube. 

measurement Device Niyo or its equivalent 

66 Digital integrating Features: Precision Type 2 instrument, Measurement range: 30 to 140 dBa, Response modes: Fast, slow, 

sound level Meter Frequency weighting:, A, C, Displays SPL, Maximum SPL. Includes: WS-7 wind screen, 56-990 

calibrator Adopter, 56-533 storage case.(With essential accessories) 

Preferably 3M Quest Technology or its equivalent 

67 Platform Type Jack 1500 to 2500 Kg capacity 

Preferably Contech or its equivalent 

68 Digital relative Range - 4-95 % (With essential accessories), accuracy ±3 % 

humidity meter Preferably Spectrum Technologies or its equivalent, 

69 Push pull force gauge Dimensions 6x3x13/8, weight one lb, two opearating test modes untime test mode & timed test mode, 

measures lb,newton & Kgf, Capacity for compression 200 lbs, capacity for tension 500 lbs 4 selectable 

threshold settings (With essential accessories). 

Preferably Hoggan make or it’s equivalent 

70 Treadmill 0-12% elevation and 20 kmph speed and programmable. Technical data : motor-3 Hp continuous duty, 

Running surface- 150 x 50 cm, Running belt – 2 ply, Speed- 1- 20 km/h ( adjustable in increments of 0.1 

km/h), Inclination- 0-12 % ( adjusted in 1% increments), Console : 

Display – time, distance, speed, inclination, pace, calories, pulse, display of course profile with LCD, 

Training programs: 20, 4 direct selection buttons for speed. Features: Heart rate measurement, chest strap 

incl., PC interfaces. Extras: transport wheel 

Preferably Daum ergo make or its equivalent 


71 Cam corder mass:2.4 kg(5 lb 4 oz)(body), 2.8 kg (6 lb 2 oz) (with lens hood, large eye cup’ BP-U30 battery, one SxS 

PRO memory card), Dimension (WxHxD) :179x199x308 mm(while recording , EVF on, LCD monitor 

off), Operating temperature: -20⁰C + 40⁰ C (+32⁰F t0 104 ⁰F), storage temperature: -20 ⁰C to 60⁰C (-4⁰F 

t0 140 ⁰F), Battery operating time Approx. 240 min with BP-U60 battery, approx. 120 min with Bp-30 

battery, Recording format : Video MPEG-2 long GOP, HD HQ Mode: VRB, Maximum bit rate : 35 

Mb/s, MPEG-2 MP@HL, HD SP mode: CBR, 25 b/s, MPEG-2 MP@H-14, SD made : DVCAM, Audio 

DVCAM , Audio PCM (2ch, 16bit, 48-kHz), Recording frame rate: PAL area: HD HQ mode: 

1920x1080/50i, 25p, 1440x1080/50i, 25p, 1280x720/50p, 25p, (With essential accessories) 

Preferably Sony PMW-EX 1R or its equivalent 

72 CNC Turning centre Max chuck diameter =200 mm,Max dia. of the job (to be machined ) = 210 mm, Automatic tool changer 

(ATC)= Servo type, ATC stations = 8 stations, Tool changing time = 5 sec, Spindle motor = 7.5 hp, 

Spindle rpm = 3500, Tail stock = present, Hydraulic system = Rexroth, Control = fanuc. Omite, (With 

essential accessories) 

73 

CNC Vertical 

machining centre 

74 All purpose wire rope 

electric hoist 

75 Hydraulic hand pallet 

truck 

Preferably Jyoti make, Model = DX 200 or its equivalent 

Table size = 1100 x 750 mm, X travel = 750 x 500 x500 mm,Y travel = 750 x 500 x 500 mm, Z travel = 

750 x 500 x500 mm,Weight capacity = 1300 kg, Automatic tool changer = 20 tools, Spindle motor = 20 

hp, Spindle rpm = 10000, Accuracy = 0.004 mm, Tool changing time = 10 sec, Rapid = 1000 ipm, 

Control = HAAS, (With essential accessories) 

Preferably HAAS make, Model = VF2YT or its equivalent 

wire rope size diameter-suitable to the capacity(10-20), capacity- 3000 kg, FEM duty- 1Am, ISO duty 

M4, Lifting speed single-4 mpm, dual fast/slow 4/1.3, No of falls Two, Motor kw main/creep 3.5, motor 

1500rpm head room hook susp-950, Head room with PT-870, Head room with GT/ET-870, weight hook 

susp.125 kg, weight with ET 3 m Lift-185., Motor kw main/creep 3.5/1.2, motor 1500/460 rpm, head 

room hook susp-950, Head room with PT-870, Head room with GT/ET-870, weight hook susp.135 kg, 

weight with ET 3 m Lift-200. 

Preferably Contech make or its equivalent 

Capacity up to 1250 kgs, Roll diameter mm: D1 - 400 to 1200 mm, D2- 700 to 1500 mm, Fork width mm: 

W1-316 to 625 mm, W2-813 to 1102 mm. 

Preferably Contech make PV25 PRV-or its equivalent 


76 Multimedia I-station It centrally houses all its components and accessoories such as LCD Touch monitor integrated controller 

in a rack type storage device, 120 watt inbuilt Amplifier, inbuilt dual channel receiver, 2 wireless VHF 

mike, fexible goose neck mice and platform for visualize/laptop.Wireless microphone : Frequency range : 

740MHz ̴752 MHz , RF Output: 10 mW , Speaker : 2x 60 W speaker with woofers and tweeters, , 

Frequency range: 40 Hz ̴ 20 KHz, output 60 W RPM/ 160 W peak, weight 3.5 Kg., Gooseneck 

microphone,Frequency response : 150 Hz ̴ 17 KHz, Dimensions: (WXHxD): 185x290x185mm, Length: 

55 Cm, Software: Description: Electric lecturer stand/ electric board KPS S/W using for class and 

presentation, Operation system: Microsoft windows 2000, windows XP, Windows XP, Windows Vista, 

Hard disk: Over 20 GB 

Preferably Clarity make or its equivalent 

77 Portable Podium with built-in 60 Amplifier, 60 W , 2 Nos cordless hand held Microphone and receiver, with built in three 

speakers, built in goose neck mice, Built in podium reading light, can connect to external amplifier and 

speckers and can handle up to 300-350 audience. 

78 Pro sound clarity waist 

band amplifier 


Works with rechargeable lithium battaries with long life 10-12 hours and has 10 watts power output. This 

is very light weight amplifier weighting about 300 grams and is supplied with one headset microphone 

and battery adopter. 


Shaft diameter: 35-150 mm, maximum bearing outer diameter:215 mm, maximum reach : 816 mm, 

capacity: up to 50 tonnes with all essential accessories 

Capacity 50 tonnes , use with hydraulic unit CSS 50 maximum reach 400 mm maximum spared 400mm 

79 Hydraulic bearing 

puller with kit 

80 Bearing push cum 

puller 

with all essential accessories 

81 Load cell for Food 250Kg capacity 

Texture Analyzer Preferably TAHD Plus model 

82 Digital pH meter Range 0-14 pH, resolution 0.01 pH, accuracy + 0.01, Temperature compensation : ATC, Slop correction 

80 to 120% Preferably Systronic make 

83 Infrared theromometer Temperature range -67 to 536 F (-55 to 280C) 

Distance to spot size ratio of 12:1 

Bright built in Laser pointer 

Accuracy +/- 1 degree C (2F) with 1/10th degree resolution 


Emissivity preset at 0.97, 8-14 micron thermopile detector 

Measures average, maximum and minimum temperatures 

Backlight LCD display, select temp unit C or F, 

Auto off 

84 Generator (DG set) 5, 10, 15, 25 kVA 

Cooling Air- cooled engine 

Power kW (hp) 11.76 (16) 

Prime Power Genset rating at 0.8 pf (kVA)10 with accessories and AMF 

Preferably Kirloskar make 

85 Data Logger Data logger having up to 8 to 15 output/inputs points/Channel. 

With the external storage device up to 10 GB. The data logger should be included with the various sensor 

of temperature having range 0 to more than 300 O C, flow of water/liquid and air, humidity, speed/rpm, 

pressure of liquids/water, wind speed and another sensor to monitor the performance of biomass furnaces 

(0 to more than 1500 0 C ) etc having high accuracy of measurement/sensing. 

The proposed sensor of the data logger should be operate from very small quantity of parameters to the 

large. The data logger should be easily interface to the computer in online mode or data collected in off 

86 Pyranometer with 

recorder and Sensors 

line mode. 

Calibrated against an Eppley Precision Spectral Pyranometer (PSP) under natural day light conditions. 

Typical error under these conditions is ±5%. Sensitivity: Typically 90µA per 100 Wm-2. Linearity: 

Maximum deviation of 1% up to 3000 Wm-2. Stability: < ± 2 % change over a 1 year period. Response 

Time: 10µs. Temp. Dependence: 0.15 % per °C maximum. Cosine correction: cosine corrected up to 80 ° 

angle of incidence. Azimuth: < ± 1% error over 360° at 45 ° elevation. Tilt: No error induced from 

orientation. Operating temperature: - 40 to 65 °C. Relative humidity: 0 to 100%. Detector: High stability 

silicon photovoltaic detector (blue enhanced). Sensor housing: Weather proof anodized aluminium case 

with acrylic diffuser and stainless steel hardware. Size: 2.38 Dia. X 2.54 cm H (0.94” x 1.0”) Weight : 28 

g (1 oZ). Cable length: 3.0 m., coupled with With EM-50 data logger and Portable Data Analyser. 

1. ECT AIR TEMPERATURE SENSOR 

HUMIDITY ACCURACY 

± 2% from 5 - 90% RH, ± 3% from 90 - 100% RH 


TEMPERATURE ACCURACY 

-40 to -20°C: ± 1.0°C 

5 to 40°C: ± 0.5°C 

40 to 50°C and -20 to 5°C: 

better than ± 1.0°C 

HUMIDITY RESOLUTION 

0.1% RH 

TEMPERATURE RESOLUTION 0.1°C 

HUMIDITY RANGE 3 to 100% RH 

TEMPERATURE RANGE -40°C to 50°C 

SENSOR TYPE 

Digital Capacitance and Thermistor 

OUTPUT 

I2C 

OPERATING ENVIRONMENT 

-20°C to 50°C 

CABLE LENGTH 

3 m 

CABLE CONNECTOR TYPES 

3.5 mm "stereo" plug 

SENSOR DIMENSIONS 

3 cm x 1 cm 

2. HUMIDITY/TEMP SENSOR WITH RADIATION SHIELD 

TEMPERATURE ACCURACY 

-40 to -20°C: ± 1.0°C 

5 to 40°C: ± 0.5°C 

40 to 50°C and -20 to 5°C: 

better than ± 1.0°C 


TEMPERATURE RESOLUTION 

0.1°C 

TEMPERATURE RANGE -40°C to 80°C 

MEASUREMENT SPEED 

10 ms (milliseconds) 

SENSOR TYPE 

Thermistor 

OUTPUT 

320 - 1000 mV @ 3 V excitation 

OPERATING ENVIRONMENT 

-40°C to 80°C 

POWER 

2.5 VDC @ 2 mA, to 3.6 VDC @ 7 mA 

CABLE LENGTH 

5 m 

CABLE CONNECTOR TYPES 

3.5 mm "stereo" plug or stripped and tinned lead 

wires (3) 

SENSOR DIMENSIONS 

2 cm x .075 cm 

3. RT-1 SOIL TEMPERATURE SENSOR 

ACCURACY 

Wind Speed: ± 5% 

Wind Direction: 7° 

RESOLUTION 

Wind Speed: 1 mph (0.45 m/s, 1.6 km/hr) 

Wind Direction: 1° (0 to 355°) 

RANGE 

Wind Speed: 0 - 129n mph (58 m/s, 209 km/hr) 


Start Threshold: 3 mph (1.3 m/s, 4.8 km/hr) 

Wind Direction: 0 to 360° 

MATERIAL 

Wind Vane and Control Head: UV-resistant ABS 

Wind Cups: Polycarbonate 

Anemometer Arm: Black-anodized aluminum 

DIMENSIONS 

18.5 in. long x 7.5 in. high x 4.75 in. wide (470 mm x 191 mm x 121 mm) 

WEIGHT 

2 lbs. 15 oz. (1.332 kg) 

4. DAVIS CUP ANEMOMETER 

ACCURACY 

Wind Speed: ± 5% 

Wind Direction: 7° 

RESOLUTION 

Wind Speed: 1 mph (0.45 m/s, 1.6 km/hr) 

Wind Direction: 1° (0 to 355°) 

RANGE 

Wind Speed: 0 - 129n mph (58 m/s, 209 km/hr) 

Start Threshold: 3 mph (1.3 m/s, 4.8 km/hr) 

Wind Direction: 0 to 360° 

MATERIAL 

Wind Vane and Control Head: UV-resistant ABS 

Wind Cups: Polycarbonate 

Anemometer Arm: Black-anodized aluminum 

DIMENSIONS 

18.5 in. long x 7.5 in. high x 4.75 in. wide (470 mm x 191 mm x 121 mm) 

WEIGHT 

2 lbs. 15 oz. (1.332 kg) 


87 

88 

Thermo anemometer 

(digital) 

The technical details of digital thermo anemometer was listed below: 

Measurement principle : Constant temperature method 

Range : 0 to 20 m/s with resolution 0.01m/s 

Accuracy : ±5 per cent 

Temperature range : 20 to 70 o C 

Display : LCD up to 20 digit 

Measurement integration 

Time : Continuous measurement 

Dimension : 88x278x201mm (hxwxd) 

Sensor : NTC in bridge circuit 

Portable flue gas analyzer Portable flue gas analyzer Sensonic-1400/O2, CO2/NO/SO2 and CH4 

Package content: Main adapter 100…240 VAC/18VDC, Analysis in hand-held-casing with sensors for 

O2, CO and CH4, utility CD (manual. FG Aplus…), Probe holder k heated, 3 m, filter, Probe pipe K/L, 

300 mm, 800 0 C, smoke-comparison-scale and strips for smoke deter, 40 pc, ABS madur case, 

89 Bomb Calorimeter 

(Digital) 

Dimensions: 245 (W) x 90/128 (H) x 60 (D) mm (with essential accessories) 

Bomb capacity: 300 ml 

Pressure test: At pressure 300 kg/cm2 for 10 minutes 

MOC (Bomb): Bomb body and lid made of corrosion resistant stainless steel alloy 

MOC (Crucible): Made of corrosion resistant stainless steel alloy 

MOC (Water Jacket): Static and made from stainless steel 

Regulating valve: Fine control regulator valve with pressure gauge 

Safety valve: Safety relief valve for user safety comes as a standard feature 

Design and standard: Designed as fundamental standards:BS-1016 and BIS-1350 

Operating time per test: Main testing period takes maximum of 15-20 minutes/test 

Oxygen file: Through a high pressure Schrader valve 

Testing temp. range: Operating range from 5 o C to 40 o C 

Temp. resolution: Temp. scanning resolution of 0.01 o C 

R.S.D.: 2-3% 

Range: Measuring range:1000-10000 cal/gm 


90 Stage Level Recorder 

Gas filling: Push-n-fit type filling system for user ease 

Digital Beckman Thermometer: Microprocessor based digital Beckman thermometer directly indicating 

rise in temperature 

Oxygen cylinder:Oxygen cylinder 9 litrs. Capacity with dual stage regulator 

Daily type with horizontal/vertical drum for fixing recoding paper and mechanical clock driven pen in 

water tight housing. Preferably manufactured by Lynx/Hindustan Clock Works 

91 Stage Level Recorder Daily type with horizontal/vertical drum for fixing recoding paper and Electronic clock driven pen in 

92 Portable Pygmy 

Current Meter with 

direct velocity indicator 

93 Digital anemometer Type: Handheld 

Airflow: 0.4 - 30 m/s (±2,0%) 

Power supply: 6-12 V DC 

94 Digital Temperature- 

RH Logger 

95 Walk behind the floor 

scrubber dryer 

water tight housing. Preferably manufactured by Lynx/Hindustan Clock Works 

Pygmy type water current meter to measure shallow streams with the wading rod IS: 3910 and supplied 

duly calibrated from Government Research Institute. 

Range of operation 0.03 to 1.5 m/s. 

Memory: 1-4GB 

Display : LCD 

Type: Digital Chart Recorder (real time graphing LCD display) 

Memory: ≥ 2GB 

USB port for data transfer to PC 

Range: Relative humidity 0 to 100% 

Temperature -20 to 80°C 

Resolution 

Temperature: 0.1°C 

Humidity: 0.1% 

Elec. System : 230 Volts, 50 Hz (EU), Scrubbing head : width-350-500 mm, No of brushes : 01, Brsuh 

diam-350 mm, Brush speed -140 g/min, Transmission : Gear box, Motor power -200 W, Productivity – 

1300 sq. met per hr, 

Brush (Standard) : Material : Tipo standard-Nylon, Bristle section 0.8 mm, Brush connection –automatic, 

brush disconnection –automatic 

Solution tank : Capacity -16 lit, Water flow adjustment –manual with water cock, 


96 Increment Borer 

Recovery tank : Capacity-19 lit, discharge hose -25 mm, 

Vacuum : Vacuum motor power,-400 Watt, Stage – 2-type tangential, Motor position –on the solution 

tank, Type of float – Mechanic in polyeurethane, 

Squeegee : Shape- Parabolic type, Width – 450 mm, Main body material : polypropylene, Blade material 

: Latex, Prssure adjustment-3 easily adjustable independent wheels, raising system manual 

100-500mm, core dia 5.15mm, 3 thread 

97 Bark guage Thickness from 0-50 mm or 0" to 2" in increments of 1/10". 

98 Increment Hammer Material: stainless steel, Scale on hammer handle 

99 Borer Starter with adapter 

for 12mm core dia. 

Foldable useful for easier boring into tree and better cores in frozen wood & heart wood 

100 Electronic Clinometer Size: 20 X 63 X 44 nun / 0,8 X 2,5 X J ,7 inch 

Temprature: Min -15 0 C Max 45 0 Resolution 

C 

0.1 m/ft < 100m/ft or 1m/ft > 100 m/ft 

Angles -55 to 85 0 C 

Resolution: 0.1 0 C 

Accuracy: ±0.2 0 C 

101 electronic Clinometer 

Preferably HEC R Basal Area, Haglof, Sweden 

Size: 20 X 63 X 44 mm 

with Basal Area function Temprature: Min -15 0 C Max 45 0 Resolution 

C 

0.1 m/ft < 100m/ft or 1m/ft > 100 m/ft 

Angles -55 to 85 0 C 

Resolution: 0.1 0 C 

Accuracy: ±0.2 0 C 

Relascope functions: 0.5, 1, 2, 4 m 2 /ha 

102 Mantax precision blue 

Preferably HEC R Basal Area, Haglof, Sweden 

400/800mm 

made of aluminum scale with mm wear digits, light weight, adjustable jaws 


103 PA- Lectern System Power output -40 watt Max., Speaker Impedance (External) : 4Ω, 

Frequency response : 100-16.000Hz,Rec. Out put : 1V (nominal), 

Power supply : AC 220-240V, 50/60 Hz, Power consumption : AC 100W, Dimension W 420 xH 1135 x 

D 580 mm, Weight 18.30 Kg Approx.Features : Compact PA system, MP3 Recorder + Player, Hand – 

held wireless microphone, built in 40 W amplifier with speakers, Gooseneck wired microphone, 

adjustable podium light. 

104 Digital Camera and 

accessories 

Type of Camera Compact 

Effective pixels 16MP 

Sensor Type CMOS 

Optical Zoom 14x 

Focal length 4.5-63.0mm 

Aperture range f/3.3-6.6 

LCD Size (Inches) 3-4 

Resolution (dots) 460k 

ISO Sensitivity Range ISO 125-1600 ISO 3200 

White Balance Auto / Cloudy / Daylight / Flash / Fluorescent / Incandescent / Preset 

Manual 

Shutter Speed 1/1600-1 

Preferably Nikon 

105 Neutraon probe Max. temperature: 70ºC (extended range available) 

Max. pressure: 20MPa (extended range available) 

Neutron detector Type: 3He proportional counter 

Source: 241Am-Be 

Range: 0 to 60% apparent sandstone porosity 

Natural-gamma detector 

106 Digital seed counter Count seed from 0.5 mm 15 mm. 

Counts maximum up to 9999 Grains in a batch or hegher 

Power consumption 220 V 


107 Essential oil distillation 

plants (Stainless Steel 

make,1.0 ton capacity) 

108 Aloe Vera processing 

plant (100 kg capacity) 

109 Solvent Extraction Unit 

( 10 kg capacity ) 

Operational Speed 50 cycles or heigher 

S.S. Field Distillation Unit (Direct Fired) 

Cap. 4000 lts. Charging cap. 1000 kg. approx. 

Vessel Made of 2.50 mm thick S.S 304 

False Bottom made of 5.00 mm thick M.S. 

(All Contact parts will be made of S.S.304) 

Above units will be all complete with S.S. Vessel, M.S. False Bottom, M.S. Grid , Water Seal Type, with 

M.S. Swing System and Chimney. 

Condenser : Shell & Tube type, Shell of Condenser made of Mild Steel having S. S. ( 304 ) tubes. 

Receiver : Made of Stainless Steel ( 304 ) Sheet. 

Material Handling Equipment Girder (one no.) & Pillar (Made of Iron) with Chain Block & 

Trolley) 

Aloe Vera Juice/Gel Processing Unit 

Cap. 100 kg. Fresh Leaf/Batch 

Unit will consist of following items 

1. Pulper (Extractor) 

2. Mixing Unit 

3. Homogenizer 

4. Filter with vacuum pump 

Solvent Extraction Plant 

Charging Capacity 10 Kg. of herbs/ batch 

The plant has to be designed, with all contact parts in S.S. (304) at the hydraulic test pressure 30 Psig. to 

carryout 

the following processes which required for the production of extract of Spices etc.. 

The plant will be based on Soxhlet design & consist the followings :- 

1. Re-Boiler Kettle 

Cap. 125 ltrs. 

Jacketed Vessel made of S.S. with M.S. Jacket , jacketed portion will be insulated . The vessel will be 

provided discharging flanged holes, Solvent Funnel with Valve , Light & Sight glass, steam inlet, 


Temperature gauge, steam trap etc. 

2. Drug Holder Cap. 140 ltrs., 

Jacketed Vessel made of S.S. with M.S. Jacket fitted with open steam coil & perforated grid, solvent & 

connections lines for charging, Jacketed portion will be insulated The vessel will be Provided 

discharging flanged holes, light & sight glass. steam inlet, Temperature gauge, steam trap etc with 

One Wire mesh Basket for charging the material 

3. Solvent Condenser 

Shell & Tube type , vertical condenser to condense vapour load from re-boiler. 

4. Ice Trap 

Cap. 15 ltrs., System to remove water from condensed solvent. 

5. Solvent Receiver 

Cap. 20 ltrs. with 20mm. dia drain valve with Nozzle 

6. Vapour Line 20 mm. dia Insulated 

4. Breather with condenser 

Made of 2.50 mm thick S. S. (304), vertical condenser shell & tube type. 

6. Solvent Receiver 150 ltrs. each 

Made of 2.50 mm. thick S.S. (304) provided with light & sight glass. 

7. Vacuum Pump 

Fitted with Flame Proof Motor. 

8. Solvent Transfer Pump - 01 No 

S. S. (316) made 100 LPM each With Flame Proof Motor. 

9. Solvent Storage Tank - 01 No 

Capacity 500 ltrs each 

Made of 3 mm thick S. S. (304) with Inlet & Out let nozzle, connected to the pump & Level gauge. 

10. Structure Suitable structure will be provided to hold the unit with working platform. Made of Mild 

steel. 

Plant hydraulic test pressure = 50 psig, spring loaded safety valves on all vessels, insulation on boiling 

kettle, Drug holder, Ice trap, steam & Vapour pipes. 

110 Dehydrator plants The dehydrating machine has a stainless steel casing and removable inner drum, wherein the chips are put 


for drying. These machines are fabricated from premium grade metal, which are resistant to corrosion and 

are highly durable. Our machines are easy to operate and work on high speed to offer high performance. 

111 Grinder / Pulveriser Universal grinder / pulveriser for making the products in powder form 

112 Sieving and packing Standard ISI mark for sieving and packing of liquid and solid materials 

unit 

113 Centrifuge One-chip microprocessor control. 

Extensive applications using versatile fixed angle rotors, swing bucket, Vertical and zonal continous flow 

rotors. 

Display and control RCF. 

Integral running. 

Gentle start-up and braking: ten acceleration/deceleration profiles 

114 AAS Spectrometer 

Wavelength range 190-900nm 

Main Specification 

Light Source System 

Wavelength accuracy Better than ±0.25nm 

Resolution 

Baseline stability 0.004A/30min 

Background correction 


Two spectral lines of Mn at 279.5nm and 279.8nm can 

be separated with the spectral bandwidth of 0.2nm and 

valley-peak energy ratio less than 30%. 

The D2 lamp background correction capability at 1A is 

better than 30 times. 

The S-H background correction capability at 1.8A is 

better than 30 times. 

6-lamp turret ( Two high performance HCLs can be 

mounted on the turret to increase the sensitivity in flame 

Lamp turret 

analysis.); auto alignment; auto fine adjustment; fully 

automated scan and peak-picking 

Automatic adjustment and display. Wide pulse current: 

Lamp current adjustment 

0~25mA, Narrow pulse current: 0~10mA. 

Lamp power supply Powered by two pulses (wide and narrow)

Optical System 


mode simultaneously. 

Monochomator 

Single beam, Czerny-Turner design grating 

monochromator 

Grating 1800 l/mm 

Focal length 277mm 

Blazed Wavelength 250nm 

Spectral Bandwidth 0.1nm, 0.2nm, 0.4nm, 1.2nm, auto-switch over 

Flame & Graphite Furnace atomizer automatic 

changeover 

Automatic graphite furnace position optimization, 

automatic flame height setting and horizontal position 

Atomizer Flame/Graphite Furnace optimization. 

Automatic gas flow setting, alarm and automatic 

protection function for gas leak, abnormal flow, airpressure 

deficiency and abnormal flame extinction, 

automatic ignition. 

Sample tray capacity 55 sample cups and 5 cups for matrix modifier 

Material of the sample 

Polypropylene 

cup 

Volume of the standard 

3ml for sample, 20ml for matrix modifier 

Graphite Furnace 

Autosampler 

cup 

Number of repeatable 

measurements 

Up to 99 times 

Sampling system 

100ul and 5ml injectors, large flow sampling nozzle 

rinsing. 

Sampling precision and Precision: 1%; Repeatability: 0.3% for min. sampling 

repeatability 

volume. 

Auto-correction 

Sampling nozzle auto-correction, sample cup height 

auto correction. 

Detection and Data Detector Photomultiplier with high sensitivity and wide spectral

Processing System range. 

Software Windows 98/Me operating system 

Working Curve Method (1st order and 2nd order fitting) 

Analytical method with automatic sensitivity correction; Standard Addition 

Method. 

Concentration Auto-calculation of concentration and content 

Repeated measurement of up to 99 times, automatic 

Repeatable measurement calculation of mean value, standard deviation and 

relative standard deviation. 

Multi-task Functions 

Sequential measurement for multi-element 

determination to the same sample (Max. 6 elements). 

Condition reading With model function 

Result printing 

Measurement data and final analytical report printout, 

editing with Excel. 

Burner 10cm single slot all-titanium burner 

Flame Analysis Spray chamber All-plastic spray chamber. 

Nebulizer High efficiency glass nebulizer with metal sleeve. 

Characteristic 

Concentration and 

Detection Limit 

Air-C2H2 flame 

Oxygen-rich Air-C2H2 

flame (For WFX-210) 

Cu: Characteristic concentration≤0.025mg/L, Detection 

limit≤0.006mg/L; 

Ba: Characteristic concentration ≤ 0.22mg/L Al: 

Characteristic concentration ≤ 0.4mg/L 

Temperature range Room temperature~3000ºC 

Light-controlled 

temperature range 

1500ºC -3000ºC, temperature auto-correction 

Graphite Furnace 

Analysis 

Temperature control 

accuracy 

Heating rate 

≤1% 

2000ºC/s 

Characteristic mass Cd≤0.5 x 10-12g, Cu≤5 x 10-12g, Mo≤1 x 10-11g 

Precision Cd≤3%, Cu≤3%, Mo≤4% 

Safety protection Protections for over-heating, over-current, and less 


115 Soil/Leaf water 

Potential measuring 

system 

ACCURACY ±0.05 MPa* from 0 to -5 MPa 

1% from -5 to -300 MPa 

RANGE -0.1 to -300 MPa 

MEASUREMENT TIME In precise mode: 

10-15 minutes for most soil samples 

20 minutes for plant tissue samples 

In fast mode: 

116 Pressure Chamber 

117 Canopy analysis system 

118 Rapid Plant Stress 

Screening Device 

POWER 110 VAC to 220 VAC, 50/60 Hz 

DISPLAY 20 x 2 alphanumeric dot-matrix LCD with 

backlighting 

INTERFACE CABLE Standard RS232 serial cable (included) 

COMPATIBLE 

STANDARDS 

ASTM D6836-07 

Preferably Decagon Devices 

Maximum Operating Pressure: 70 bar 

Chamber Construction: Stainless Steel 

Read-out: Bourdon Tube Gauge 

Gauge: 6" Diameter Gauge, 1/2 of 1/% accuracy. 70 bar (7 Mpa) range. 

Compression Gland Sealing system with 1/4 inch gasket/insert, 5 Extra 1/4 Compression Gland Gaskets, 1 solid 

Standard Rubber Sealing Gaskets, O-Ring lubricant, 6 foot Filling Hose, Technical Bulletin, Valve Adjustment 

Tool. 

LAI and PAR measurement 

Operating Environment: --0° to 50° C (32°-122° F). 100% relative humidity 

Probe Length: 86.5 cm 

Number of sensors: 80 

PAR Range: 0 to >2,500µmol m -2 s -1 

Resolution: 1 µmol m -2 s -1 

Unattended logging interval: User selectable, between 1 and 60 ms. 

Interface Cable: RS-232 cable 

External PAR sensor connector 

Measured parameters: Fo, Ft, Fm, Fv , Fv/Fm, O, J, I, P, Tm and Area over curve. 

Excitation / Actinic source:Solid state 660nm source. Saturating up to 3,000µE 

Detection system: Related pulse excitation detection with high resolution sampling 

mode for Kautsky induction curve recording. 

Detectors and Filters: A PIN photodiode with a 700 -750nm bandpass filter 

Test duration: Adjustable from 2 - 255 seconds. 


119 Hot air oven 

120 Infrared Gas Analyzer for 

Continuous Monitoring 

(CO2/H2O) 

Sampling rate: Standard mode: variable from 10 to 30,000pps. 

Digital output: RS232 port. 

Storage capacity: Up to 8,000 data sets and 32 traces. 

User interface: Display: LCD 

Keypad: dedicated function key pad. 

Power supply: Rechargeable Battery Pack 

Battery life: up to 8 hours of continuous operation. 

Leaf clips:Dark adaption clip with sliding shutter. 

Operating range: 5 to 45oC 

Size: 18” x 18” x 24”, 34” x 26” x 42”, 24” x 24” x 24”, 

40” x 32” x 42”, 24” x 24” x 36”, 40” x 42” x 54” 

Watt ratings: 3000 to 4500 Watt 

No of Selves: 2/ 3/ 4 

Measurement Principle: Non-Dispersive Infrared 

Traceability: Traceable gases to WMO standards from 0 to 3,000 ppm. Traceable gases to EPA protocol gases 

from 3,000 to 20,000 ppm 

Pressure Compensation Range: 15 kPa – 115 kPa 

Maximum Gas Flow Rate: 1 L/min 

Output Signals: Two Analog Voltage (0-2.5V or 0-5V) and Two Current (4-20mA), Digital: TTL (0-5V) or Open 

Collector 

DAC Resolution: 14-bits across user-specified range 

Source Life: 18,000 Hours 

Operating Temperature Range: -20 to 45°C 

Relative Humidity Range: 0 to 95% RH, Non-Condensing 

CO2 

Measurement Range: 0-20,000 ppm 

Accuracy:

RMS Noise at 370 ppm with 

1 sec signal filtering:

Response Time (90%): max 15 s with membrane filter 

Settling Time: max 500 ms 

Supply Voltage: 12 V dc Nominal or equivalent 

Current Consumption: max 4 mA (Active) 

Operating Temperature: -40° to +60°C 

Mounting Hardware should be provided for the sensor 

TEMPERATURE 

Sensor: PRT based 

Measurement Range: -40° to +60°C 

Output signal range: 0 to 1.0 V (typical) 

Accuracy: at least 0.5% for the range 


Data output should be compatible to the dedicated data logger. 

2. Atmospheric Pressure Sensor: - 

Pressure Range 600 to 1100 hPa (mbar) 

Operating Temperature -50 to +60°C 

Accuracy at least ±0.5 hPa (mbar) at -50 to +60°C 



3. Solar Radiation Sensor: - 

Pyranometer based sensor 

Light Spectrum Waveband: 400 to 1100 nm 

Sensitivity: Typically 80 __ per1000 Wm-2 

Linearity: Maximum deviation of 1% up to 3000 W m-2 

Accuracy: ±5% 



4. Tipping Bucket Rain Gauge 

Tips at 0.1 mm increments (0.004 in) 

Orifice diameter is max 24.5 cm (9.66 in) 


Accuracy is ±1% at rates up to 1 in hr-1 

Output: - Momentary switch closure activated by tipping bucket mechanism. 

Environmental Limits: 

Temperature: 0° to +50°C and Humidity: 0 to 100% 

The bucket should have leveling arrangement for horizontal mounting 



5. Wind Speed and Direction Sensor (Propeller type) 

The sensor should be made out of rigid UV-stabilized thermoplastic with 

corrosion proof stainless steel and anodized aluminum fittings. The sensor 

should have stainless steel precision-grade ball bearings for the propeller shaft 

and vertical shaft bearings. 

Wind Speed 

Range: 0-100 m/s 

Accuracy: ±0.3 m s 

Starting threshold: 1.0 m/s 

Wind Direction 

Range: 0-360° 

Accuracy: ±3° 

Starting threshold: 1.1 m/s 

Damping ratio: max 0.25 

Output: Analog dc voltage from potentiometer linearity 0.25%, 



All the sensors should have at least 20m cable for proper connectivity to the 

data-logger. 

6. Dedicated data Acquisition System for AWS 

The data logger should have battery-backed SRAM for CPU usage, program 

storage, and data storage for up to at least one million data values with 

upgradeable the memory size at a later date without any hardware replacements 


and with inherent noise reducing facility. It should be compatible with 12VDC 

power supply and should have programming and math functions capability for 

deriving calculated parameters with high program execution rate of up to 100 

Hz for making fast measurements. It should have ability to implement 

conditional statements in the data logger programming. The Histogram 

instruction is required to process input data as either a standard histogram 

(frequency distribution) or a weighted value histogram. It should be possible to 

calculate the standard deviation of the Source over the output interval and store 

the results in a Data Table. 

Range and Auto Ranging: Support of +/-5VDC range and should have auto 

ranging facility apart from making measurements on following ranges specific to 

a channel: e.g., ±5000 mv, ±2500 mv, ±250 mv, ±25 mv, ±7.5 mv, ±2.5 

mv, etc 

Resolution: on the most sensitive range better than 0.5 microvolt. 

Switched voltage excitations: The system should have switched outputs 

provided for precision excitation voltages. 

Digital I/O ports: At least eight ports minimum should be provided for frequency 

measurements, digital control, and triggering. 

Switched 12 Volt: Two independent 12 V unregulated sources switched on & 

off under program control. 

Operating Temperature Range: -55° to +50°C; 

The datalogger should have ability to reject the 50Hz noise for accurate 

measurements. 

Software: - Special Software with Data logger should be provided to monitor 

various sensors. 

POWER SUPPLY: -Power Supply should include the following 

POWER SUPPLY Charger/Regulator 12 VDC 

POWER SUPPLY wall Adaptor AC-DC 240 VAC to 18 vdc 

Power Cord With Type -C plug 

SMF BATTERY 12V, 7 AH 


124 TDR probe Measuring range of 0 - 95 volume percentage moisture, Depth below ground up to 90cm, LCD read-out 

screen, PVC coated rods, Accuracy ±1% 

125 SAP flow meter Suitable stem diameter: 4 to 10mm 

Overall dimensions of the sensor: 30 × 35 × 40 mm 

Cable length between probe and signal conditioner: 1m or higher 

Output cable length: 4m 

126 Centrifuge Capacity: 6x250/4x1000 ml 

Type of Container: Plastic bottles 

Speed: 10000RPM 

127 Water Heater/Geyser Water store type 

Capacity: 25 L or higher 

Input: 2 KW 

128 Solar water Heater Capacity: 200-300 L 

Preferably Honeywell make 

129 Portable Diesel Silent 2.5, 5.0, 7.5KVA 

Generator 

Preferably Prefect House, Kirloskar make 

130 Dual Temp. Freezer Capacity: 300L 

Temperature range -14 0 C to -23 0 C 

Preferably Blue Star 

131 Online UPS 1-10KVA 

Single and three phase power supply, with battery 

Preferably Transtek make 

132 SPRERI Refrigerator Capacity 80L, 200 Wp solar Photovoltaic Modules with Galvanized Iron module mounting structure, 2 

units of 130 Ah lead acid batteries, one 24V charge controller/regulator, 10m 4-core 4.5 sq. mm insulated 

133 FRP 

Rainguage 

copper cable 4 day autonomy. 

non- recording, 200 cm sq. 

as per IS 5225-1992 

with 4 LITS Bottle & over flow collector 


134 Glass Borosil Measure 20 mm 

135 Wind vane as per IS 5799 with stand 

136 Anemometer as per IS 5912 

137 Stevenson Screen (Single) as per IS 5948-1970 made of teak wood with Angle · Iron stand 

138 Thermometers 1. Max 

2. Min 

3. Dry bulb 

4. Wet Bulb 

139 Double Stevenson as per IS 

Screen 

140 Open pan Evapori 

meter made of Copper 

sheet with fixed point 

gauge Still well, 

Measuring Tube, Wood 

rack, Thermo meter 

141 Self recording gauge 

with rnechanical clock 

142 Therrnograph with 

quartz clock 

143 Hygrograph with 

quartz with clock 

144 Soil therrnorneter with 

iron stand 

5948‐1970 made of teak wood with Angle Iron stand 

Made of Copper sheet with fixed point gauge Still well, Measuring Tube, Wood rack, Thermometer 

with clip 

with rnechanical clock 

with quartz clock 

with quartz with clock 

With iron stand at 5, 10, 20, 30 crn 


145 Cards 

Long curved cards 

Short curved cards 

Straight cards 

146 Digestion System (4 , 6, 

12,20 samples ) : value 

added version 

147 Fully automatic 

scrubber system 

148 Automatic Nitrogen 

Distillation system 

149 Refrigerated Water 

coolling system 

Cards for summer, winder and equinoctial period 

R Automatic Autosequencing Four Place PC Compatible Macro Block Digestion System (250ml) (Suitable for 

plants, soils, water, food & feed, Fertilizers & pesticides samples), Microprocessor Allows 4 intelligent memory 

Programes,6 desirable sequence steps of time /temp. domain, 24 memory segments, Auto alarm for user's attention, 

Bright Digital Two line LCD Display, Casted Aluminium Alloy Heaters, Aluminium Block 250ml capacity with 

Digital Temperature Controller,Temperature Control Range: Room temperature to 450 ° C, Direct USB port to 

connect to a laptop without need of a connector,Inbuilt software Programme to Handle Micronutrient, 

Macronutrient, Trace Element with Single Acid, Diacid & Triacid 

Non corrosive centrifugal suction pump with inbuilt self priming feed pump for water recirculation. Non corrosive 

submergible pump for drain, Non corrosive submergible pump for condenser water circulation. Vacuum Source: 

Giant Aspirator filter pump. Alkali container capacity : 2 litres. Water container capacity : 2 litres. Outer cover : 

MS Powder Coated. Fibre Reinforced plastic Tank of capacity 10 litres. Pump: Self priming water recirculation 

pump. 

ELITE EX VA: KEL PLUS Autosequencing Microprocessor based PC Compatible Distillation System with inbuilt 

software with 8 Programmable steps and 30 Predefinable User Storage Auto Sequence Programmes Fully 

Automatic sequencing with auto Intelligent run of 8 steps 30 Program, Automatic KMno4 addition for available 

Nitrogen, Automatic Dilution,dilution delay time, Automatic Alkali Addition, Automatic Reaction Delay time for 

Neutralization, Automatic Steam injection, Automatic setting time, Automatic Titration Connectivity Function, 

Automatic microbrilliant distillate control with adjustable sensor, Two line Aplha numeric Digital LCD Display, 

Microprocessor based feather touch keys,Standard RS 232 connectivity kit with USB port. Standard Auto Titrator 

Connectivity kit, Standard operating software feature,Adjustable steam power: 10-100%, Auto online water saving 

mechanism. Auto tube insert error indication. Auto deactivation of System on error diagnosis, Distillation 

Capacity: 15-20 Samples/hr, Nitrogen Recovery > 99.5%, Automatic Reagent level sensor with alarm (Alkali & 

KMno4),High grade Stainless steel non corrosive steam Generator, 

Model KEL FREEZE T: Water Cooling Circulating system with digital display of temperature. Refrigerated 

water circulating system with built in compressor and recirculation. Temperature Indication : Digital display. 


150 SOCS PLUS Automatic 

PC Compatible Solvent 

Extraction System (ISO 

9001: 2008 Certified) & 

(CE Certified) Value 

added version 

Compressor Capacity -3/8 HP Kirloskar compressor,Fan- 10Watta, 1450 rpm,Built in Safety Features: Auto over 

temperature protection / Auto Error indication / Sensor Break Protection, SS Tank capacity: 10 Liters, 

Recirculation Pump: Submergible pump, Over load protection,Microprocessor based PID Temp. 

Controller,Temperature Range: 10°Cto 20ºC. MS powder coating housing,Nipples for inlet, outlet & overflow 

Drain -1/2 an inch ball valve. Electrical Requirement: 220v/50Hz Mains. 

Model -SCS 2 R : SOCS PLUS Two Place Fully Automatic PC Compatible Solvent Extraction System with 

auto time temperature programming facility and auto phase change over (ISO 9001:2008 Certified), Number 

of Samples : Two, Heater Source: Casted Aluminium Alloy Heater. Hardware : Four Intelligent memory 

program of six autosequencing steps with direct USB port for PC/Laptop connectivity, Display : Two line 

bright digital LCD display of set temperature and actual temperature / accuracy + 1 o C, Cold water line for 

condensation of solvent with silicon hose inter connection for condensor, Extraction of Thimble: Thick 

Nitrocellulose thimble (� 25mm X 80mm) & (�33mm X 80mm) - 1 box each, Fully Programmable 2 Sample 

Solvent extraction system for oil/fat extraction with 4 stage extraction - boiling, Condensation, rinsing and 

solvent recovery steps. Heater Power: 700 Watts. Temperature Range: 35°C to 200°C. Temperature Accuracy: +/- 

1ºC of set temperature, Temperature Indication: Digital, Temperture Controller: Microprocessor based PID 

Controller with Auto tuning facility. Temperature Setting: Feather touch membrane keys, Independent loading of 

sample with individual mechanical controls. , Builtin safety features.* ISO 9001:2008 Certified.Electrical 

Requirement:230V/50Hz. AC Mains. 


II) LIST OF FURNITURE 

(Make only Godrej / Wiprpro/ Supreme/ Ornate/ Jalaram are applicable as per 

standard) 

Sr. 

No. 

Name of the Items Detail Specification 

1 Officer chair Bravo High Back with arm 

Pneumatic seat, height adjustment 120mm, center tilt 

mechanisum, molded PU foam, cushion seat and back, 5 

pronged nylon pedastal, 99.5h x78d x78w, SH-41.5 

2 ATTACHED DESK- 1 Seater SDCB ( Age Group 15 and above) 

BENCH 

Model-3, W550xD915xHD774HS440 

3 Table Wooden with Combination of wood and steel.2 drawer units, drawer 

Steel 

lockable 

4 

Sample storage Almirah 

Storwel plain with Godrej Lock 

Godrej make STSTW040XXX 

5 Ornate Chair with cushion Supreme 

6 Laboratory Table 

Storage unit with Cam lock 

with metal shutter and drower 

MF7 - SU - 600 2S - 9H 

MF7 - 600 2S - 1D - 9H 

AF7 - 600 2S - ID- 9H 

Skirting for 150 mm height 

REHAU MAKE 

Skirting panel of L 2000 

mm 

Silver skirting hardware 

packets 

750mm depth x 900 mm height 

Double sided reagent shelf Reagent shelf unit 1500 mm (main) with 2 cutouts for 6 

2 tier, 300 mm depth x 680 module plate Reagent shelf unit L 1500 (add on) with 2 

mm height, 

cutouts for 6 modules plates 

Sinks and Accessories SS sink REK 2017 

over all size 520 x440 x200 mm 

SS peg board (SUS 42) 

Water Faucets 3 way brass water faucet (V3) 

Gas valve 2 way bench mounted gas valve (VL4B- 2A) oxygen (Blue - 

Blue - Blue) 

Electric Connection and 6 Module Plate - North West make (CS 956 M -S) 

fittings 

16A 1 way switch Northwest make (M 0130) 6/16 A, 6 pin 

shutter socket Northwest make 

Work surface 20 (+) mm thick granite 

Load molding and V groove (running meter) 

Sink cut: Neoprene mat (2.5W x 6mm thick) 

Sample storage Almirah Storwel plain with Godrej make 

7 “E” class room 

Main table :- The main table is of size 

training table 

1500x600x740mm completely made up of Prelam 

particle board conforming to IS : 12823 Interior 


8 Modular classroom 

desk Bench 

Grade with PVC edge banding. Top are with 

25mm thick boards with 2mm PVC edge banding 

with enhanced scratch resistance supported on 

25mm thk. Separate provision for mounting 

switches on the wall adjoining the tables shall be 

made by customer as the tables do not come with 

switch mounting facility. 

Legs :- Inspire and Jeff ire legs are made of steel. 

These have four main parts – Base, Vertical 

Frame, Top support brackets and Side Covers. 

Base is aesthetically formed in steel with rounded 

edges for safety of users. Vertical frame in twintubular 

steel construction has provision to carry 

wires and also provides for select height 

adjustment (±20mm) of table top. Levelers are 

provided to take care of any unevenness in the 

floors. Top support brackets and tube assembly 

is in steel chrome plated finish for excellent 

aesthetics. Side covers are perforated steel panels 

with powder coated finish along with base and 

vertical frame. Modesty Panel :- The Modesty 

Panel is made of CRCA. The modesty panel is 

perforated for enhanced aesthetics. The metal 

modesty is duly powder coated to 50-60 microns. 

All CRCA material confirm to IS 513 CR2 2008. 

The front row – only the table. The middle row – 

This unit includes the chair and the table . 

The last row – only the chair 

First row -- size 780mm x300mm 

Table size H -25mm xD-300mmxL-1090mm 

Chair Size - -432mm x-450mmx-520mm 

Book self -- 100mmx200mmx440mm 

Distance between the edge of the table to the edge of the chair 

minimum 

50mm and maximum 100mm 

Table top -MDF with laminate finish. 25mm thick 

Legs- Powder coated die casting aluminum. 

Modesty Panel – High quality cold-rolled, perforated 

steel made of CNC. Book Rack – Powder coated 

cold-draw steel100x200x440mm 

Seat – Molded Plywood in Laminate finish 17mm 

Back – Moulded Plywood in laminate finish 17mm 

thick 

Seat System – Counterweight mechanism for smooth 

operation. 

MODESTY PANEL : High quality cold-rolled perforated steel plate 

made by CNC . STANCHION : Die-casting aluminum, power 

coated . 

TABLE TOP : MDF in high press laminate finish, Available in 

fixed/foldable top . BOOK RACK : Premiere cold-draw steel (power 

coated ) . 


BACK : Moulded plywood in laminate finish . SEAT : Moulded 

plywood in laminate finish . SELF-RISING SYSTEM : 

Counterweight mechanism allows for a lifetime of smooth 

operation . 

9 Book Case With 2 door, Width-940 mm, 

Depth 914 mm, Height – 320 mm 

Size – 30" x 36" x 12" gauge 22 Door -16 with 

CRC material sheet and over black paint back 

side 22 gauge. 

10 Book Case :Book case glass – Steel cupboards with 

glass shutters – Size “ 78” x 36” x 19” 

11 Half writing pad chair Half pad with cushion four leg with power 

quoted . 

12 Full writing pad chair Full pad with cushion four leg with power quoted 

13 Computer Chair 

Revolving And 

Fixed for four leg 


. 

Back type - Medium Back Seat to Backrest 

Height -495 , Backrest Height – 615 , Backrest 

Construction- Ply +Foam , Finish - Mesh in Black 

color 

Seat Foam: 

Made out of High resilience foam with the 

following properties 

Density 58-61 Kg/m 

(IFD) Indentation: Force Deflection 25% 21.5 

Kgf/cm 

Tensile strength 2.0 Kgf/cm 

Tear strength 1.0 Kgf/cm 

Resilience 60% 

Mechanism: Synchro 1 Position BIFMA 

Compliant Mechanism 

� Back Tilt: 87 -106 degrees 

� Seat Angle: 3-10 degrees 

� With back tension adjustment knob 

� Locking Positions: 1 position, can be locked 

& unlocked by lever 

� Tested for 3, 00,000 Cycles as per ANSI 

BIFMA X5.1 -2002 

Gas Lift: 

Meets DIN 4550 Class 3 

Meets ANSI BIFMA performance standards 

Tested for 1, 00,000 Cycles 

Caster: 

Options for Nylon 50 mm / PU 60 mm 

Complies to ANSI / BIFMA X 5.1 – 2002 

Tested for 1, 00, 000 Cycles 

14 Computer Table Size –W-1200 mm, D-600 mm, H-750one drawer 

and one keyboard with self arrangement for 

printer and storage made up of pre laminated

particle board of thin 18 mm and 4 side PVC 

edge. 

15 Computer Table Size W-600 mm, D-900 mm, H-750one keyboard 

with inner shelf arrangement for printer and 

storage made up pre laminated particle board of 

thickness 18 mm and 4 side PVC edge banding 1 

16 Conference table 

Size 

6 SEATER ---- 

1800LX1100WX740HT 

8 SEATER --- 

2400LX1100WX740HT 

10 SEATER- 

3200LX1100WX740HT 

12 SEATER 

3800LX1500WX740HT 

16 SEATER 

5150LX1500WX740HT 

mm 

Modular Conference System for minimum 6 to 

16 seating and above seating (even number) 

capacity with Table Top shape option of either 

Cascade /Oval Shape. Table tops are in 25mm 

thick prelims particle board conforming to IS : 

12823 Interior Grade with 2mm thick PVC edge 

banding. Table comes pre-fitted with DUO which 

is a convenient dual side opening flip top box for 

providing power-data-voice switches on a 

modular switch plate. DUO consist of Aluminum 

Extruded top cover with textured powder coating 

finish in Silver Color as a Standard to match any 

décor. Standard nominal sizes of DUO are either 

350 mm (suitable for 8 module) or 450 mm (8 

module + Quadra Plate-for Data). Understructure 

is made of Pre-Lam Particle boards with 2mm 

thick PVC edge banding. Gable ends are in 25mm 

thick and modesty panels are in 18mm thick 

panels. The table comes in packed in a flat 

condition and easy to assembly modules and 

hardware which gets quickly installed in the final 

customer destination. Table top Color options are 

provided by and depending on the board size 

available 

17 Cupboard (Steel) Stoarges are made up of CRCA having shelves. 

The size of the tower is 600 (W) X 425 (D) X 1980 

(H). The storage system is stackable with 4 doors. 

The storage has equally divided shelves. Each 

storage door system has an indicial locking 

mechanism pre-fitted to it. The top of the Storage 

is made up of 2mm thick CRCA duly powder 

coated to approved finish. The caracass and shelf 

are made up of 0.8mm CRCA Duly Powder 

Coated. The skirting is made up of 1.2mm CRCA 

duly powder coated to the approved finish. The 

shelf comes with a stiffener with a thickness of 

15mm duly tested for 40Kg UDL. The storage 

system to have 4mm thick clear toughened glass 

with a duly powder coated aluminum frame. The 

18 Executive Mid back 

chair 

powder coating is of 50-60 microns 

Mid Back :- Fabric upholstered 

Armrest :- Height adjustable 2 dimensional arm 


19 Executive Mid back 

chair 

20 Executive Hi back 

chair 

21 Executive Hi back 

chair 

rest with PU Pads on arms. 

Mechanism :- Synchro 1 with 1 positions of 

locking when back is erect 

Base :- Nylon Base with 30% glass reinforced 

Castors :- 50mm Dia castors. 

Seat Dimensions :- 435 (Depth from lumber point 

to seat edge) X 490 (W) 

Back Dimensions :- 470 (Height of seat to Back 

rest) X 470 (W) 

Adjustable back rest Mid Back :- Fabric 

perorated net 




locking when back is erect 

Base :- Nylon Base with 30% glass reinforced 

Castors :- 50mm Dia castors. 


to seat edge) X 495(W) 

Back Dimensions :- 427 (Height of seat to Back 

rest) X 479 (W) 

High back Seat and Back :- Leatherette 

upholstered 




locking 

Base :- Aluminium Die cast 

Castors :- 60mm Dia castors inclusive of 10mm 

PU. 


to seat edge) X 510 (W) 

Back Dimensions :- 735(Height of seat to Back 

rest) X 560 (W) 

High back Seat and Back 

Castors :- The chair is mounted on soft castors of 

50mm dia. 

Pedestal :- The lower pedestal is made of injection 

moulded with 30% glass-filled Nylon and 

provides the needed strength to the complete 

chair. Mechanism :- Synchro 1 with 1 positions 

of locking when back is erect 

Seat / Back Assembly:- The back is made up of 

foam upholstered Ply having High resilience foam 

on the back. The complete back is contoured to 

provide the needed lumbar support for long 

seating hours. The seat is made up of moulded 

foam, upholstered with mesh fabric having high 

tensile strength. 


The Seat and Back dimensions are as under :- 

• Back Rest :- 790mm High and 500mm Width 

• Seat :- 460mm width and 470mm depth 

• Seat to Back rest height :- 650mm. 

22 Executive Office Table Main table of size 1800x900x740mm completely 

made up of Prelam particle board conforming to 

IS : 12823 Interior Grade with PVC edge banding. 

Top are with 25mm thick boards with 2mm PVC 

edge banding with enhanced scratch resistance 

supported on 25mm thk. Gable ends and 18mm 

thick Modesty panels. exposed edges are in 2mm 

thick PVC edge banding & sealed edges are in 

0.8mm thk PVC edge banding. Separate provision 

for mounting switches on the wall adjoining the 

tables shall be made by customer as the tables 

do not come with switch mounting facility. Wire 

routing / wire management gourmets 

Return table of size 1350x450x700mm 

completely made up of Prelam particle board 

conforming to IS : 12823 Interior Grade with PVC 

edge banding. Top is in 25mm thick board with 

2mm PVC edge banding supported on 25mm 

thick. Gable ends and 18mm thick. Modesty 

panel. Exposed edges are in 2mm thick PVC edge 

banding & sealed edges are in 0.8mm thick PVC 

edge banding. Separate provision for mounting 

switches on the wall adjoining the tables shall be 

made by customer as the tables do not come with 

switch mounting facility. Wire routing / wire 

management gourmets 

Back storage unit of size 900x425x700mm made 

up of 18mm thick. prelam particle board having 

premium lock with wave key technology. Storage 

body is made of 18mm thick pre laminated 

partical Board conforming to IS : 12823. The 

back of the unit is made from 9mm prelaminated 

board. All the exposed edges are with 2mm PVC 

edge Imported banding & sealed edges are with 

0.8mm thick PVC Imported edge banding. The 

top, side and hinged shutters are sealed with 

2mm thick PVC edge banding. 

The units are assembled by knock down fittings 

such as Minifix & Dowels. All the hardware and 

Hinges are from Hettich/Ebco. PVCPedestal unit 

of size 350x450x550mm made up of 18mm thk. 

Prelam particle board conforming to IS : 12823 

Interior Grade with post formed edge profile on 

top with premium central locking and 3 equal 

size drawers with roller slide mechanism for 


added mobility 

23 Office Table 

Size – 3 x 5 x 21/2 with laminated Board 

prelaminated ply) Thick, 18 mm and H side PVC 

edge banding with computer table attached and 

one side drawer unit 

21/2 x 41/2 x 21/2 H laminated ply two side two 

drawer and two side two file box and keyboard, 

locking arrangement. 

Size 3’ x 6’ x 2.5’, left side drawer unit and right 

side computer table attached size 1.5’ x2.5’ x 2.5’ 

and laminated ply material thick 18 mm 

24 Filling Cabinet The Stoarges are made up of CRCA having 

shelves. The size of the tower is 900 (W) X 425 (D) 

X 1200 (H). The storage system comes with 3 

Filing Drawers. The storage has equally divided 

shelves. The complete storage system has a 

centralized locking mechanism pre-fitted to it. 

The top of the Stoarge is made up of 2mm thick 

CRCA duly powder coated to approved finish. The 

carcass and shelf are made up of 0.8mm CRCA 

Duly Powder Coated. The skirting is made up of 

1.2mm CRCA duly powder coated to the 

25 Hostel Cott 

approved finish. The shelf comes with a stiffener 

with a thickness of 15mm duly tested for 40Kg 

UDL. The drawers have double extension ball 

bearing slides. The powder coating is of 50-60 

microns 

Single bed in size of 1800x900x400mmht. from 

the floor without Mattress 

Detailed Configuration: 

1) Powder Coated (as per specific shade) in MS 22 

Gaze with 1.2 mm thick. Metal frame with two 

horizontal support in middle with accessories. 2) 

Head Board with 25mm thick. Prelaminated 

Particle Board (as per approved shade) with 2mm 

PVC edge banding of Rehau, along with 

26 Lab Stool 

25mmthk. Prelaminated Particle Board with 2mm 

PVC edge banding for sides, head & foot Patti in 

200mm height. 3) Bed Rest with 12mm thick Ply 

(1800x900mm) in MR grade in 1 piece.4) Four 

legs will be in Square shape with 32x32mm width 

& 1.2mm thickness(as per specific shade).5) Total 

height of Head Board from floor level will be 

800mm in curved shape from the top. 

Size – 12” H 18.25 a stainless steel diameter 12” 

over a using assign ring. The costing ring is 

supported by 100 x 100 4mm square pipe. The 

Pitch of the 12.5 m which is manufactured by the 


27 Modular Furniture 

for Laboratory 

4 rings made up stainless still pipe with diameter 

and thickness 1.2 mm. The Nylone bush will be 

legs. 

Lab Table size: 10ft x 5ft consisting of Granite 

worktop supported on CRCA storages with 

Hettich make PP legs with electric points on 

Reagent shelves with sink. 

5MS CRCA Chemical Storage Cabinet, size: 1000 

x 486 x 1800mm : 1.2mm thk.34098 

6 Anti Vibration Table, AVT 1 : 600 x 600 x 

900mm. 

Two seater perforated with CRC metal sheet and 

28 Two Seater 

perforated with Arm powder coated frame. 

29 Three seater 

Three seater perforated with CRC metal sheet 

perforated with Arm and powder coated frame. 

30 Visitor Chair 4 legs with cushion branded material 

31 Steel Lockers with The lockers are made up of CRCA having 4 

locking system compartments in every tower. The size of the 

2 door 

tower is 300 (W) X 350 (D) X 1830 (H). The tower 

4 door 

is equally divided into 4 compartments. Each 

6door 

compartment has an indicial locking mechanism 

8 door 

pre-fitted to it. The top of the Tower is made up of 

12 door 

2mm thick CRCA duly powder coated to approved 

finish. The caracass and shelf are made up of 

0.8mm CRCA Duly Powder Coated. The skirting 

is made up of 1.2mm CRCA duly powder coated 

to the approved finish. The powder coating is of 

50-60 microns 

32 Library Storage The exclusive and comprehensive library storage 

furniture 

solution entitled Search is designed to store 

books and stand the test of time, by protecting 

and treasuring the valuable words of knowledge. 

Structure and Material Specifications :- The 

side, top and back panels are made of 18mm 

thick prelam particle board with lamination on 

both sides. The prelam particle board is mounted 

on the basic frame structure made out of 2" X 1" 

thick CRCA pipe. The shelves are made up of 

25mm thick Prelam Particle board with same 

lamination on both sides. The top corners are 

covered with aesthetically extruded aluminium 

giving a complete smooth finish to the structure. 

The bottom three shelves of each unit are at 

various angles to enable quick location of books / 

references. The bottom most shelf is inclined at 

15 degree, the 2nd lst shelf is inclined at an 

angle of 9 degree and the 3rd last shelf are 

inclined at an angle of 3 degree. The shelves are 

suitable for books of different heights. The lower 


2 shelves are of 280mm height suitable for larger 

size books. The bottom 3 shelves are fixed and 

the top 3 shelves are height adjustable to 

accommodate books of various sizes. Each 

module can be provided with A5 size acrylic 

signage board on the side for defining categories. 

The racks too can be provided with individual 

rack signage for easier sub category 

identification. The search is available in both 

single sided and double sided configuration with 

main and add on modules. The complete system 

is extremely sturdy and is equipped with 6 

levellers to take care of any floor unevenness. The 

immaculate detailing, well finished end caps and 

outer frame of the rack in matching powder 

coated finish adds to the overall aesthetics. 

33 Hostel Table(Wooden) Combination of wood with.2 drawer units, drawer lockable 

Size:2X3 ft 

34 Chair without 

hands(Wooden) 

Combination of wood without hands 


Sr. 

No. 

III) LIST OF STATIONERY AND OFFICE CONSUMABLES 

Item Name 

Specification 

Make 

1 

Cream wove 

Paper 

51 x 76 cm, 11.6 Kg, 57 GSM BP 

2 

Cream wove 

Paper, 

16”x 26”, 8 Kg., 60 GSM BP 

3 

Cream wove 

Paper 

40 x 64 cm , 6.9 Kg 54 GSM,.BP 

4 Cream wove paper 58.5 x 45.5 cm., 7.2 Kg BP 

5 Cream wove paper 58.5 x 91 cm., 14.4 Kg BP 

6 

Cream wove 

Paper, 

16” X 26” cm, 7.8 Kg. 58 GSM BP 

7 Ledger Paper 51 x 76 cm. 13.6 Kg BP 

8 Ledger Paper, 43 x 68 cm., 10.2 Kg, 70 GSM 

9 Maplitho Paper 20” X 30”, 13.6 Kg. BP 

10 Maplitho Paper 51 x 76 cm 11.6 Kg., 

11 Maplitho Paper 17” X 27”, 8.8 Kg, 60 GSM 

12 Maplitho Paper 60 GSM, 8 Kg., 18”x 23”, (Ruled) BP 

13 Maplitho Paper 40 X 65 cm. 10.2 Kg BP 

14 Art Paper 23”x 36”, 90 GSM BP 

15 Maplitho Paper 58.5 X 91 cm, 21.3 Kg. 80 GSM BP 

16 Maplitho Demi 45.5X 58.5 cm. 7.7 Kg , (Ruled) BP 

17 Maplitho Paper 18” X 23” cm, 8.00 Kg. 60 GSM BP 

18 Maplitho Paper 58.5 X 91cm,16 Kg,60 GSM BP 

19 Maplitho Paper 23”X 36”, 60 GSM BP 

20 Art Card 23” X 36”, 250 GSM 150 sheet BP 

21 Art Crown Paper 51x 76 cm, 15.5, Kg 80 GSM BP 

22 Art paper 23” x 36”, 90 GSM BP 

23 Art paper 23” x 36”, 130 GSM BP 

24 Cromo Art Paper, 23”X 36”, 75 GSM BP 

25 

Colour deimi 

Paper 

58.5x45.5 cm.,7.2Kg Andra Mills, 

26 Century Cards 22”X28”,10 Kg JK. 

27 Ivory Cards 22”X28”, 250 Gsm BP 

22”X28”, 300 GSM BP 

28 Straw Board 65X77.5 cm., Dkg, (240Z), Standard 

29 Handmade paper 22”X30”, 100kg Best Quality 

120kg Best Quality 

17 Kg., Shirpur 

30 File Card 

22.5 Kg., Shirpur 

27Kg., Shirpur 

31 Copy Power Paper A4 Size Paper , 210x297 mm, 2.3 Kg,75 GSM BP 

32 Copy Power Paper Legal Size Paper, (FS) 215x345 mm, 2.8 Kg,75 GSM BP 

33 Copy Power Paper A3 Size Paper 420x297 mm, 4.6 Kg,75 GSM BP 

34 Executive Bond 18 x 23, 70 GSM BP 

35 Writing Paper Half Size 8.5 x 13.5 , 60 GSM.BP 

36 Writing Paper Full Size 13.5 x 17 , 60 GSM. BP 

37 Binding Cloth Swastic/Butterfly Best quality, 

38 Pen Drive 

4 GB, (Moseabear/ Kingstone) 



39 Zadu 


32 GB (Moseabear/ Kingstone) 

Full size standard 

40 Kharata 

Full size 

standard 

41 Acid White cat 

Shriji Chemicals 

42 Phenyl SWAN 

43 Naphthalene boll LION 

44 Cloths 

Shirting Tericot- (48+52%), /- per mt. width 89cm. 

White, Blue, Khakhi Mafatlal fabric 

Suiting (Pant)- (67+33%), per mt White, Blue, Khakhi 

Mafatlal fabric, 

Sari- white with Blue border strip- Tericot (67+33%)- 5 mt. 

long 

Mafatlal fabric / Standard, 

Blouse piece 80 cm- sky blue Tericot- (48+52%), per pc 

STANDARD 

45 Raincoat Full size, Standard, SUPER Quality 

46 

Computer Printer 

Toner 

Canon printer 

47 

FX-1 

48 Laser Jet Toner/ 

cartridge 

HP series 

ML-3470A, Samsung 

3470B Samsung 

ML- 1610 Samsung 

FX-9 

Canonfax-L230 

51604A 

51605B 

51605R 

51625AA 

51626AA 

51629AA 

51633MA 

51640AA 

51640CA 

51640MA 

51640YA 

51641AA 

51644CA 

51644MA 

51644YA 

51645AA 

51649AA 

51650CA 

51650MA 

51650YA 

92274A 

92298A 

92298X 

C1806A 

C1807A 

C1808A 

C1809A 

C1816AA 

C1823DA 


C1892A 

C1893A 

C1894A 

C1895A 

C3844A 

C3845A 

C3900A 

C3903F 

C3906F 

C3909A 

C3909X 

C4092A 

C4096A 

C4096AC 

C4127A 

C4127X 

C4127XC 

C4129X 

C4129XC 

C4149A 

C4150A 

C4151A 

C4152A 

C4153A 

C4182X 

C4182XC 

C4191A 

C4192A 

C4193A 

C4194A 

C4195A 

C4800A 

C4801A 

C4802A 

C4803A 

C4804A 

C4805A 

C4806A 

C4810A 

C4811A 

C4812A 

C4813A 

C4820A 

C4821A 

C4822A 

C4823A 

C4836AA 

C4837AA 

C4838AA 

C4841AA 

C4842AA 

C4843AA 

C4844AA 

C4846A 

C4847A 

C4848A 

C4871A 

C4872A 


C4873A 

C4874A 

C4890A 

C4891A 

C4892A 

C4893A 

C4902AA 

C4906AA 

C4907AA 

C4908AA 

C4909AA 

C4911A 

C4912A 

C4913A 

C4920A 

C4921A 

C4922A 

C4923A 

C4930A 

C4931A 

C4932A 

C4933A 

C4934A 

C4935A 

C4936A 

C4937A 

C4938A 

C4939A 

C4940A 

C4941A 

C4942A 

C4943A 

C4944A 

C4945A 

C4950A 

C4951A 

C4952A 

C4953A 

C4954A 

C4955A 

C4960A 

C4961A 

C4962A 

C4963A 

C4964A 

C4965A 

C4990A 

C4991A 

C4992A 

C4993A 

C4994A 

C4995A 

C5000A 

C5001A 

C5002A 

C5003A 

C5004A 

C5005A 


C5010DA 

C5011DA 

C5016A 

C5017A 

C5018A 

C5019A 

C5020A 

C5021A 

C5023A 

C5024A 

C5025A 

C5026A 

C5054A 

C5055A 

C5056A 

C5057A 

C5058A 

C5059A 

C5060A 

C5061A 

C5062A 

C5063A 

C5064A 

C5065A 

C5066A 

C5067A 

C5068A 

C5069A 

C5070A 

C5071A 

C5072A 

C5073A 

C5074A 

C5075A 

C5076A 

C5077A 

C5078A 

C5079A 

C5080A 

C5081A 

C5083A 

C5084A 

C5085A 

C5089A 

C5090A 

C5091A 

C5092A 

C5093A 

C5094A 

C5095A 

C5096A 

C6578DA 

C6614DA 

C6615DA 

C6625AA 

C6628AA 

C6656AA 

C6656B 


C6657AA 

C6658AA 

C7115A 

C7115X 

C8061A 

C8061D 

C8061X 

C8061XC 

C8543X 

C8543XC 

C8550A 

C8551A 

C8552A 

C8553A 

C8560A 

C8561A 

C8562A 

C8563A 

C8721ZZ 

C8727AA 

C8727B 

C8728AA 

C8750A 

C8751A 

C8752A 

C8753A 

C8754A 

C8765ZZ 

C8766ZZ 

C8767ZZ 

C8771ZZ 

C8772ZZ 

C8773ZZ 

C8774ZZ 

C8775ZZ 

C9351AA 

C9351BA 

C9351CA 

C9352AA 

C9352CA 

C9359AA 

C9360AA 

C9361ZZ 

C9362ZZ 

C9363ZZ 

C9364ZZ 

C9365AA 

C9368AA 

C9369ZZ 

C9370A 

C9371A 

C9372A 

C9373A 

C9374A 

C9380A 

C9383A 

C9384A 

C9390A 


C9391A 

C9392A 

C9393A 

C9396A 

C9397A 

C9398A 

C9399A 

C9400A 

C9401A 

C9403A 

C9404A 

C9405A 

C9406A 

C9407A 

C9408A 

C9409A 

C9410A 

C9412A 

C9413A 

C9414A 

C9415A 

C9416A 

C9417A 

C9418A 

C9419A 

C9420A 

C9421A 

C9422A 

C9423A 

C9424A 

C9425A 

C9426A 

C9427A 

C9428A 

C9429A 

C9430A 

C9431A 

C9432A 

C9433A 

C9434A 

C9435A 

C9448A 

C9449A 

C9450A 

C9451A 

C9452A 

C9453A 

C9454A 

C9455A 

C9456A 

C9457A 

C9458A 

C9459A 

C9460A 

C9461A 

C9462A 

C9463A 

C9464A 


C9465A 

C9466A 

C9467A 

C9468A 

C9469A 

C9470A 

C9471A 

C9480A 

C9481A 

C9482A 

C9483A 

C9484A 

C9485A 

C9486A 

C9487A 

C9518A 

C9700A 

C9701A 

C9702A 

C9703A 

C9720A 

C9721A 

C9722A 

C9723A 

C9730A 

C9731A 

C9732A 

C9733A 

CB271A 

CB272A 

CB273A 

CB274A 

CB275A 

CB276A 

CB277AA 

CB285A 

CB286A 

CB287A 

CB288A 

CB289A 

CB290A 

CB291A 

CB293A 

CB294A 

CB296A 

CB297A 

CB299A 

CB301A 

CB302A 

CB303A 

CB304AA 

CB314A 

CB315A 

CB316ZZ 

CB317ZZ 

CB318ZZ 

CB319ZZ 

CB320ZZ 


CB321ZZ 

CB322ZZ 

CB323ZZ 

CB324ZZ 

CB325ZZ 

CB335ZZ 

CB336ZZ 

CB337ZZ 

CB338ZZ 

CB339A 

CB340A 

CB341A 

CB342A 

CB343A 

CB344A 

CB345A 

CB346A 

CB347A 

CB348A 

CB349A 

CB350A 

CB381A 

CB382A 

CB383A 

CB384A 

CB385A 

CB386A 

CB387A 

CB390A 

CB400A 

CB401A 

CB402A 

CB403A 

CB435A 

CB436A 

CB540A 

CB541A 

CB542A 

CB543A 

CC364A 

CC364X 

CC388A 

CC530A 

CC531A 

CC532A 

CC533A 

CC582A 

CC583A 

CC584A 

CC585A 

CC586A 

CC587A 

CC588A 

CC589A 

CC590A 

CC591A 

CC620AA 

CC621AA 


CC627AA 

CC628AA 

CC629AA 

CC630AA 

CC636ZZ 

CC640ZZ 

CC641ZZ 

CC643ZZ 

CC644ZZ 

CC653AA 

CC654AA 

CC656AA 

CC660AA 

CC663A 

CC664A 

CC665A 

CC666A 

CC667A 

CC668A 

CC669A 

CC670A 

CC671A 

CC672A 

CC673A 

CC674A 

CD887AA 

CD888AA 

CD949A 

CD951A 

CD952A 

CD953A 

CD954A 

CD955A 

CD956A 

CD957A 

CD958A 

CD959A 

CD960A 

CD961A 

CD962A 

CD963A 

CD964A 

CD971AA 

CD972AA 

CD973AA 

CD974AA 

CD975AA 

CD983A 

CD984A 

CD985A 

CD986A 

CD987A 

CD988A 

CD989A 

CD990A 

CD991A 

CD992A 

CE250A 


CE251A 

CE252A 

CE253A 

CE255A 

CE260A 

CE261A 

CE262A 

CE263A 

CE505A 

CE740A 

CE741A 

CE742A 

CE743A 

CH565A 

CH566A 

CH567A 

CH568A 

CN068AA 

Q1338A 

Q1338AC 

Q1338D 

Q1339A 

Q2610A 

Q2610AC 

Q2610D 

Q2612A 

Q2612AD 

Q2613A 

Q2624A 

Q2670A 

Q2671A 

Q2672A 

Q2673A 

Q2681A 

Q2682A 

Q2683A 

Q3683C 

Q3960A 

Q3961A 

Q3962A 

Q3963A 

Q3971A 

Q3972A 

Q3973A 

Q5703C 

Q5920C 

Q5921C 

Q5922C 

Q5923C 

Q5942A 

Q5942X 

Q5942XC 

Q5942XD 

Q5945A 

Q5949A 

Q5949X 

Q5949XC 

Q5949XD 


49 Xerox Toner/ cartridge 

Q5950A 

Q5951A 

Q5952A 

Q5953A 

Q6000A 

Q6001A 

Q6002A 

Q6003A 

Q6460A 

Q6461A 

Q6462A 

Q6463A 

Q6470A 

Q6471A 

Q6472A 

Q6473A 

Q6511A 

Q6511X 

Q6511XC 

Q6511XD 

Q7516A 

Q7516AC 

Q7551A 

Q7551X 

Q7551XC 

Q7553A 

Q7553X 

Q7560A 

Q7561A 

Q7562A 

Q7563A 

Q7570A 

Q7581A 

Q7582A 

Q7583A 

SA293AA 

SA294AA 

SA295AA 

SA296AA 

SA332AA 

SA333AA 

SA334AA 

SA335AA 

SA336AA 

SA350AA 

SA401AA 

SA402AA 

Y1719A 

Y2172A 

Y2173A 

Y2174A 

Y2175A 

Y2176A 

Y2177A 

Y2178A 

Y2179A 

Y2180A 


(Canon) 

NPG-15 Toner NP-7160 

NPG-15 Drum Unit NP-7160 

NPG-20 Toner iR-1600 

NPG-Drum Unit iR-1600 

NPG-25 iR-2230/3025/3225 

NPG-26 iR-3530/3045/3245 

NPG-25/26 Drum Unit iR-2230/3025/3225/3530/3045/3245 

NPG-28 Toner iR-2016/2018/2318L 

NPG-28 Drum Unit iR-2016/2018/2318L 

NPG-50 Toner iR-2535/45 

NPG-51 Toner iR-2520/2525/2530 

NPG-50/51 Drum iR-2520/2525/2530/2535/2545 

Toner 

NPG-46 Cyan iRC-ADV-5030 

NPG-46 Magenta iRC-ADV-5030 

NPG-46 Yellow iRC-ADV-5030 

NPG-46 Black iRC-ADV-5030 

NPG-46 Drum Unit 

Black 

iRC-ADV-5030 

NPG-46 Drum Unit iRC-ADV-5030 

Color 

Cartridge 308 LBP-3300 

Cartridge 316 CMYK LBP-5050 

Cartridge 318 CMYK LBP-7200 

Cartridge 328 icMF-4412/520/4450/4550d/4570dn 

Cartridge FX9 Fax L140/ICMF-43704150/4350 

Cartridge 416 CMYK ICMF-8030cn/8050cn 

Cartridge 418 CMYK ICMF-8350cdn 

Riso Ink KZ-30 

Riso Master KZ-30 

Riso Ink CZ-180 

Riso Master CZ-180 


Place 

Date 

IV) CHEMICALS/ GLASS WARES/ PLASTIC WARES / FILTER PAPERS AND MEDIA 

Sr. 

No. 

Name of Firm Discount on the printed price list of manufacturer Tax/duty 

if any 

(pl. 

Chemical Media Glassware Plastic ware Filter paper specify) 

1. Fisher Scientific 

2. S.d. fine (SDFCL) 

3. Hi Media Lab. 

4. Genetix 

5. Loba Chemie 

6. Sisco Research 

7. RFCL (Rankem) 

8. Merck 

9. Axygen Scientific 

10. Promega Ltd. 

11. Sigma Aldrich 

12. Oxford 

Laboratory 

GENEI Brand 

13. (Merck 

Biosciences) 

14. Chromous 

Biotech 

15. Eppendorf 

consumables 

16. Borosil 

17. Vensil 

18. Riviera 

Super fit 

19. 

Continental 

20. JSGW 

21. J-SIL 

22. Tarsons 

23. Kasablanka 

24. Whatman 

Signature of tenderer 

(Office seal) 


Place 

Date 

V) LIST OF FERTILIZERS 

Sr. No Name of Fertilizer 

1 Urea 

2 Ammonium sulphate 

3 Single Super Phosphate 

4 DAP 

5 Muriate of Potash 

6 Sulphate of potash 

1 19:19:19 

2 18:18:10 

3 20:20:0 

Mixed grade Fertilizers 

Signature of tenderer 

(Office seal) 


VI) LIST OF INSECTICIDES/ FUNGICIDE/ WEEDICIDE 

Sr.No. Particular 

1. Acephate 75 SP 

2. Acetamipride 20 SP 

3. Azadirachtin 3000/ 1500 ppm 

4. Carbaryl 50 WP 

5. Chlorantraniliprole 

6. Chloropyriphos 1.5% Dust 

7. Chloropyriphos 20 EC 

8. Cypermethrin 10/25 EC 

9. Diamethoate 50 EC 

10. Dichlorovos 76 WSC 

11. Emamectin Benzoate 5 SG 

12. Fenvelarate 20EC 

13. Fipronil 5 SC 

14. Flubendamide 480 SC 

15. Imidachlopride 17.8 SL 

16. Imidachlopride 70 WS 

17. Indoxacarb 15.8 EC 

18. Lambda Cyhalothrin 2.5 EC 

19. Malathion 5% Dust 

20. Malathion 50 EC 

21. Methyl Parathion 2% Dust 

22. Monocrotophos 36 SL 

23. Phorate 10 G 

24. Profenophos 50 EC 

25. Quinalphos 25 EC / 4% Dust 

26. Spinosad 45 SC 

27. Thiamethoxam 25 WG 

28. Trizophos 35 EC + Deltamethrin 1 EC 

29. Trizophos 40 EC 

30. Sticker 

31. Lendane Powder 

32. Sulphur 

33. Copper oxychloride 

34. Morchud 

35. Lime. 

FUNGICIDE : 

1. Carbendazim 50 WP 

2. Thiram 75 WP 

3. Copper oxychloride 50 WP 

4. Wetable Sulphur 80 WP 

5. Dithane M-45 

WEEDICIDE : 

1. Glyphosate 41% SL 

2. Imazethypyr 10 %SL 

3. Pendamethilin 30% EC 


4. Hit Weed 

5. 2-4-D 80% WP 

6. Fenoxy prop P Ethyl 10 %EC

TENDER FORM - Dr. Panjabrao Deshmukh Krishi Vidyapeeth

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?