Complete Door Hardware Solutions - JLM Wholesale

401-RM Rim Housing
A two piece housing which encases a 401 Deadbolt for
mounting on the surface of a door frame. The housing and
cover are made of 10-gauge, cold-rolled steel and have a
primed finish.
Optional Finishes - US4, US10, US10B, US26 or US26D.
NOTE: The 401 Deadbolt must be purchased separately.
401-125 Double Size Housing
To accommodate two 401 Deadbolts for mounting over double
doors. The same available finishes as above.
401-90 Adjustable Rim Keeper
It is adjustable from 1" to 2", from centerline of bolt to face of
door. If more than 2" is required, a 2" to 3" adjustable rim
keeper is also available (specify when ordering).
NOTE: Must be purchased separately.
401-118 Fence Gate Housing
A two piece housing which encases a 401 Deadbolt for
mounting on a fence post. The housing and mounting angle
are made of 7-gauge steel, and the cover is 10-gauge steel,
all having a galvanized finish. This housing is adjustable
and designed to suit most conditions.
Fence Post - From 1-1/2" to 5" diameter.
Gap Between Posts - From 1-1/2" to 5" when closed.
NOTE: The 401 Deadbolt and 401-110 Locking Tongue
must be ordered separately. Specify hand (LH or RH) when
ordering.
401-110 Locking Tongue
Designed for use with above housing. The Locking Tongue
mounts on the gate post, and is adjustable to suit most conditions.
Fence Post - From 1-1/2" to 5" diameter.
NOTE:
The 401 Deadbolt and 401-118 Gate Housing must be
ordered separately. Specify hand (LH or RH) when ordering.
401 SERIES HOUSING PARTS
Mid West 1-800-522-2940 South East 1-800-768-6050
FAX 1-800-782-1160 FAX 1-800-824-6051
JLM Wholesale 3095 Mullins Court Oxford, MI 48371 JLM Wholesale SE 7517-A Orr Rd. Charlotte, NC 28213
FA 23
ELECTRIC DEADBOLTS
401-90 Keeper
401-110 Locking Tongue
401 Series Housing Parts
401 RM Rim
Housing
401
Deadbolt
401 118 Fence Gate Housing
Right Hand Shown
Rev. 04/04