System Plast Leveling Pads Range Brochure - Form 22413E

MCB12035E - 22413E - © System Plast S.r.l. , 2006-2012 - All Rights Reserved
Conveyor
Chains / Belts
Engineering
Manual
System Plast - USA
Tel. 866 765 8744 - Fax 866 447 6587
CustomerService.PTSolutions@Emerson.com
System Plast S.r.l. - ITALY
Tel. 035 83 51 301 - Fax 035 83 51 406
info@systemplast.com
System Plast - GERMANY
Tel. (03529) 56 15 0 - Fax (03529) 51 13 67
info@fspchains.com
System Plast - GERMANY
info-de@systemplast.com
System Plast - FRANCE
Tel. (01) 64 66 05 48 - Fax (01) 64 66 05 82
info-fr@systemplast.com
System Plast International - THE NETHERLANDS
Tel. (0186) 63 61 21 - Fax (0186) 63 61 25
info-nl@systemplast.com
System Plast - UK
Tel. (01926) 614 314 - Fax (01926) 614 914
info-uk@systemplast.com
System Plast - MEXICO
Tel. (033) 3284 5629
servicioaclientes@emerson.com
System Plast - BRAZIL
Tel. (011) 3618 6699 - Fax (011) 3618 6633
info-br@systemplast.com
System Plast - SINGAPORE
Tel. (65) 6891 7600 - Fax (65) 6873 7882
systemplast.sg@emerson.com
System Plast - CHINA
Tel. (86) 596 2109921 - Fax (86) 596 2136004
sales.zz@emerson.com
System Plast Catalogues available on request
Our complete range of components will cover
all your productive needs
Conveyor
Components
Interactive
CD ROM
Bearing
Supports
Leveling
Pads
System Plast worldwide!
Local Commitment, Global Presence
System Plast can reach you everywhere with fast shipments of
standard or customized products.
Find our agent or representative closest to you.
Emerson Industrial Automation
Power Transmission Solutions
Corporate Headquarters
7120 New Buffington Road
Florence, KY 41042
www.systemplast.com
www.emerson-ept.com
Leveling Pads Brochure
MCB12035E• Form 22413E
APPLICATION CONSIDERATIONS
The proper selection and application of power transmission products and components, including the related area of product safety, is the
responsibility of the customer. Operating and performance requirements and potential associated issues will vary appreciably depending
upon the use and application of such products and components. The scope of the technical and application information included in this
publication is necessarily limited. Unusual operating environments and conditions, lubrication requirements, loading supports, and other
factors can materially affect the application and operating results of the products and components and the customer should carefully
review its requirements. Any technical advice or review furnished by Emerson Power Transmission Corporation and its divisions with
respect to the use of products and components is given in good faith and without charge, and Emerson assumes no obligation or liability
for the advice given, or results obtained, all such advice and review being given and accepted at customer’s risk.
For a copy of our Standard Terms and Conditions of Sale, Disclaimers of Warranty, Limitation of Liability and Remedy, please contact
Emerson Power Transmission Customer Service at 1-800-626-2120. These terms and conditions of sale, disclaimers and limitations
of liability apply to any person who may buy, acquire or use an Emerson Power Transmission Corporation product referred to herein,
including any person who buys from a licensed distributor of these branded products.
Emerson Power Transmission does not warrant the accuracy of the information contained in this document. All interchanges should be
Emerson Power Transmission at 1-800-626-2120.
Emerson, Emerson. Consider It Solved., Emerson Industrial Automation and System Plast are trademarks of Emerson Electric Co. or one of
© 2012 Emerson Power Transmission Corp., All Rights Reserved.
MCB12035E • Form 22413E
Leveling Pads
Range
October 2012
Levelling pads
Presso Line has a wide range of fixed and articulated feet to support and secure machinery in all industrial
sectors. It is an extremely versatile product line, which always enables the best solution to be chosen in
any field of application. The line contains many products consisting of fixed, articulated, non-slip,
antivibration, with or without securing holes, in thermoplastic material, zinc plated and stainless steel.
The Presso Line is used in all work environments.
From the food to the pharmaceutical-cosmetic industry to the most aggressive environments where
corrosive substances are found.
Our range
System Plast offers a selection of levelling pads with threaded spindles ranging from M8 to M30.
These products combine two innovative elements: a base constructed of highly resistant thermoplastic
material, and a steel spindle, or a combination of two materials: polyamide with a steel insert.
Pad
The bases of all levelling pad products are available in two different materials: metal or thermoplastic.
Metal bases are either zinc plated or stainless steel and have higher load capacities.
Polyamide bases reinforced with fiberglass guarantee constant application and thermal stability.
Spindle
The spindles of all levelling pad products are available in different materials:
stainless steel for total protection against severe environments, zinc plated steel for economical corrosion
resistance. Both demonstrate high load capacities. Polyamide versions with steel inserts are suitable for
applications without corrosive agents and high load capacities.
Nickel plated brass spindles are used for applications where moderate corrosion resistance and moderate
load capacities are present.
MCB12035E - 22413E - © System Plast S.r.l. , 2006-2012 - All Rights Reserved

MCB12035E - 22413E - © System Plast S.r.l. , 2006-2012 - All Rights Reserved
ARTICULATED FEET (±15°)
IN THERMOPLASTIC
RESIN
SPINDLE MATERIAL
INOX - Stainless steel
FE.ZN - Zinc plated steel
OT.NI - Nickel plated brass
Leveling Pads Range
D.60 D.60
with single
lag hole pad
D.80
with holes
D.110
with holes
D.120
Heavy Duty
D. 40 D.50
PA.FE - Polyamide with steel insert Materials: INOX FE.ZN OT.NI Materials: INOX FE.ZN OT.NI
Thread
M12
M14
M16
M20
M24
Materials: INOX FE.ZN OT.NI PA.FE
Thread
M8
M10
M12
M14
M16
M20
D.100
D.120
with holes
D.80
Materials: INOX FE.ZN OT.NI PA.FE Materials: INOX FE.ZN OT.NI
D.100
with holes
Materials: INOX FE.ZN OT.NI Materials: INOX FE.ZN OT.NI PA.FE Materials: INOX FE.ZN OT.NI PA.FE
Thread
M12
M14
M16
M20
M24
D.121
Materials: INOX FE.ZN OT.NI Materials: INOX FE.ZN Materials: INOX FE.ZN OT.NI PA.FE
Thread
M16
M20
M24
Materials: INOX FE.ZN OT.NI PA.FE
Thread
M8
M10
M12
M14
M16
Thread
M8
M10
M12
M14
M16
M20
M24
Thread
M12
M14
M16
M20
M24
Thread
M16
M20
M24
Thread
M8
M10
M12
M14
M16
Thread
M8
M10
M12
M14
M16
M20
Thread
M12
M14
M16
M20
M24
Thread
M12
M14
M16
M20
M24
MCB12035E - 22413E - © System Plast S.r.l. , 2006-2012 - All Rights Reserved
ARTICULATED FEET (±15°)
SOLID BACK IN
THERMOPLASTIC RESIN
SPINDLE MATERIAL
INOX - Stainless steel
FE.ZN - Zinc plated steel
OT.NI - Nickel plated brass
PA.FE - Polyamide with steel insert
D.80
with holes
Thread
M8
M10
M12
M14
M16
M20
Materials: INOX FE.ZN OT.NI
ARTICULATED FEET (± 4°)
IN THERMOPLASTIC RESIN
SPINDLE MATERIAL
INOX - Stainless steel
FE.ZN - Zinc plated steel
OT.NI - Nickel plated brass
PA.FE - Polyamide with steel insert
D.100
Thread
M16
M20
M24
M30
Materials: INOX FE.ZN
D.150
Thread
M24
M30
D.60
with single
lag hole pad
Thread
M8
M10
M12
M14
M16
M20
M24
D.100
D.80
D.110
D.180
D.80
Materials: INOX FE.ZN OT.NI PA.FE Materials: INOX FE.ZN OT.NI
Thread
M12
M14
M16
M20
M24
D.100
with holes
Materials: INOX FE.ZN OT.NI PA.FE Materials: INOX FE.ZN OT.NI PA.FE
Thread
M16
M20
M24
D.100
Materials: INOX FE.ZN Materials: INOX FE.ZN
Thread
M20
M24
M30
D.120
Materials: INOX FE.ZN Materials: INOX FE.ZN
Thread
M24
M30
Thread
M8
M10
M12
M14
M16
M20
Thread
M12
M14
M16
M20
M24
Thread
M16
M20
M24
M30
Thread
M20
M24
M30
D.200
Thread
M24
M30
Materials: INOX FE.ZN Materials: INOX FE.ZN
Materials: INOX FE.ZN
MCB12035E - 22413E - © System Plast S.r.l. , 2006-2012 - All Rights Reserved
FIXED FEET (± 1°) IN
THERMOPLASTIC RESIN
SPINDLE MATERIAL
INOX - Stainless steel
FE.ZN - Zinc plated steel
D.100
single lag hole pad
ARTICULATED FEET (± 1°)
IN STEEL
D.80 D.100 D.125
FIXED FEET IN STEEL
D.30 D.40 D.50
D.120
D.80 D.100 D.120
D.80 D.100 D.125
with holes
D.80 D.100 D.120
D.100
PE - Polyethylene Materials: INOX FE.ZN PE Materials: INOX FE.ZN
Thread
M20
M24
M30
Materials: INOX FE.ZN Materials: INOX FE.ZN
SPINDLE MATERIAL
INOX - Stainless steel
FE.ZN - Zinc plated steel
D.80 D.100 D.120
with holes
FE.VN - Painted steel Materials: INOX FE.ZN FE.VN Materials: INOX FE.ZN FE.VN
Thread
M16
M20
M24
M30
Materials: INOX FE.ZN
SPINDLE MATERIAL
INOX - Stainless steel
FE.ZN - Zinc plated steel
Thread
M8
M10
M12
Thread
M16
M18
M20
M24
M30
Thread
M16
M20
M24
M30
Thread
M16
M20
M24
M30
D.50 D.80
Materials: INOX FE.ZN Materials: INOX FE.ZN
Thread
M16
Thread
M16
M18
M20
M24
Thread
M16
M20
M24
M30
Thread
M12
M14
M16
FE.VN - Painted steel Materials: INOX FE.ZN FE.VN Materials: INOX FE.ZN FE.VN
SUPPORT BASES
MATERIAL
PA - Polyamide
OT.NI - Nickel plated brass
BIPODS 120°
with joints Ø 42.4
SPLIT BIPODS
BIPODS 180°
in stainless steel with joints
BIPODS
BIPODS 180°
with joints Ø 42.4
REDUCTION BUSH
BIPODS 120°
in stainless steel with joints
BIPODS 120°
with joints 80 x 40
TRIPODS
BIPODS
in stainless steel
TRIPODS
in stainless steel
D.80 D.100 D.120 THREADED TUBE ENDS BUSHING
BUSHING
FOR ROUND AND
FOR ROUND TUBES FOR SQUARE TUBES
SQUARE TUBES
Thread
M16
MCB12035E - 22413E - © System Plast S.r.l. , 2006-2012 - All Rights Reserved
For tubes
Ø 48.3
Ø 50.9
Ø 60.3
Round
Ø 48.3
Ø 60.3
For tubes
For tubes
Ø 48.3
Ø 60.3
Square
45x45
50x50
For tubes
Ø 42.4
Ø 48.3
Ø 50.9
Ø 60.3
For tubes
Ø 42.4
Ø 48.3
Ø 50.9
Ø 60.3
For tubes
Ø 42.4
Ø 48.3
Ø 50.0
Ø 50.9
For tubes
Ø 48.3
Ø 60.3
For round
tubes
Ø 30.0
Ø 38.0
Ø 42.0
Ø 48.0
Ø 50.0
Ø 60.0
For tubes
Ø 48.3
Ø 50.9
Ø 60.3
For tubes
Ø 42.4
Ø 48.3
Ø 50.9
Ø 60.3
For tubes
Ø 48.3
Ø 60.3
For tubes
Ø 48.3
Ø 60.3
For square
tubes
25.0
30.0
35.0
38.0
40.0
50.0
60.0
MATERIAL
PA - Polyamide
OT.NI - Nickel plated brass Thread: M8 M10 M12 M14 M16 M20 M24 Thread: M8 M10 M12 M14 M16 M20