Product catalogue 2012 - SILADENT Dr. Böhme & Schöps GmbH
Product catalogue 2012 - SILADENT Dr. Böhme & Schöps GmbH
Product catalogue 2012 - SILADENT Dr. Böhme & Schöps GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Adisil ® rapid 1 : 1<br />
A rapid-curing, addition-curing duplicating silicone, developed<br />
especially for express jobs using adhesive crepe sleeves<br />
or flasks. Remove Adisil ® rapid from the duplicating mould<br />
after just 10 minutes.<br />
� ����������������������������������������������<br />
� ���������������������������������<br />
� ������������������������<br />
� �������������<br />
2 x 1 kg Components A + B REF 101231<br />
2 x 6 kg Components A + B REF 101234<br />
2 x 25 kg Components A + B REF 101237<br />
Adisil ® transparent 1 : 1<br />
Transparent addition-curing duplicating silicone. Mixing ratio<br />
1 : 1. The physical properties of the earlier product have been<br />
improved and the newly developed product is now available.<br />
� ���������������������������������������������<br />
<strong>SILADENT</strong> duplicating system<br />
� ��������������������������������������������<br />
300 and 500 nanometers may be polymerized through<br />
the silicone<br />
� ������������������������<br />
� �������������������������������<br />
2 x 1 kg Components A + B REF 101101<br />
2 x 250 g Components A + B REF 101100<br />
Marmogel Duplicating gel, green<br />
An elastic duplicating material for use with gypsum models,<br />
gypsum and phosphate bound investments. Marmogel is<br />
a reversible hydrocolloid manufactured from high quality,<br />
natural ingredients and stabilizing substances.<br />
6 kg REF 200440<br />
Duplicating silicones / Duplicating gel<br />
Technical data:<br />
(DIN EN ISO 14356, type 2 - irreversible duplicating<br />
material)<br />
Mixing ratio: 1 : 1<br />
Mixing under vacuum: 40 sec.<br />
Working time at 23°C: 3 - 4 min.<br />
Curing time at 23°C: 10 min.<br />
Tensile strength: approx. 2,2 MPa<br />
Elongation at break: approx. 310%<br />
Tear strength: > 6,5 N/mm<br />
Shore A hardness: 24<br />
Colour: yellow<br />
Technical data:<br />
(DIN EN ISO 14356, type 2 - irreversible duplicating<br />
material)<br />
Mixing ratio: 1 : 1<br />
Mixing under vacuum: 40 sec.<br />
Working time at 23°C: approx. 4 min.<br />
Curing time at 23°C: approx. 30 min.<br />
Tensile strength: approx. 2,5 MPa<br />
Elongation at break: approx. 200%<br />
Tear strength: approx. 7,0 N/mm<br />
Shore A hardness: 18 - 20<br />
27
Change language