DFW-L-E end carriages - Demag Cranes & Components

3.1 Type designation
3.2 Order information The following information is required:
• End carriage type: E - single-girder crane
Drive variant
left
20332030.wmf
20332144.p65/010802 3 Mounting code
DFW-L-E 112 / 2000 / S
• Travel wheel dia. or wheel block size/wheel base:
112 / 2000, 2500
125 / 2000, 2500, 3150
160 / 2000, 2500, 3150
200 / 2000, 2500, 3150, 4000
Other wheel bases on request
• Main girder connection: S - side
O - top
• Travel wheel tread: See section 2.3
• Travel wheel variants: A - with flange on both sides
Other travel wheel variants on request, see catalogue 203 352 44 section 2.6.3
• Drive variant, view to mounting plate:
L - 1 end carriage, left-hand side
R - 1 end carriage, right-hand side
RL - 2 end carriages arranged in pairs
(right-hand side and left-hand side)
• Number of drives per end carriage:
0 - no drive
1 - one drive
2 - two drives
• Drive shaft diameter or gearbox size:
30, 35, 45 or 50
See catalogue 203 352 44 section 2.3
• Guide rollers: Standard guide rollers yes/no
See section 6.1 and catalogue 203 352 44 section 4.6
• DPZ buffers: 100, 130, 160
See catalogue 203 352 44 sections 4.4 and 4.5
Wheel base ekt
Travel wheel diameter d1
Overhead travelling crane
Demag end carriage
Single-girder crane
Connection of main girder
• End plate variant:
lers
See section 6.1
Standard, variant for Italy, USA or for guide rol-
• DFW-L-E/S mounting plate:
See section 6.2
with countersunk bore holes,
with non-countersunk bore holes
• DFW-L-E/O mounting plate: bolted type, welded type
See section 6.3
7