OEM spectro Catalogue - Horiba

More documents

Recommendations

Info

20 Miniature spectrographs - the CP family The family of miniature spectrographs CPXX has been developed for OEM applications. Each fits into a small, hand-held, portable instrument, or can take the place of larger spectrographs when space is at a premium. These spectrographs include an aberration corrected concave holographic grating, an optical slit, an SMA connector, a choice of linear arrays and a USB electronic driver as an option. The optical input is based on an SMA connector with an integrated slit. Different models of slits are offered depending on the resolution requirement. The basic model is supplied with a slit of 100 µm width and 500 µm height. CP20 with PDA detector CP30 Features o Compact, for hand-held instruments o Low stray light o Superb imaging properties o Reliable o Robust Applications o Color measurement o Spectrophotometry o Process monitoring o Life science o Etc. CP20 CP30 CP40 optical design flat field focal length (nm) 20 30 40 wavelength range (nm) 380-760 average dispersions (nm/mm) 65 60 60 aperture (f/#) 2.7 1.5 1.5 entrance slit (µm) 50/100/250 wide slits or fiber fiber optic connector SMA 905 spectrum length (mm) 5.8 5.8 6.4 physical dimensions (mm) 22x35x14 37x51x35 55x59x52 CP40
Slits and optional CMOS or NMOS detectors for the CP spectrograph family Entrance slits Different models of slits are offered depending on the resolution required by the application. The standard slits come in widths from 50 to 500 µm. Detectors The design of these spectrographs allows the use of a large choice of linear arrays as well as custom arrays for specific applications. The standard models are: CMOS or NMOS Photodiode arrays (PDAs) o CMOS PDA S8377/ S8378-XXX 128 or 256 pixels with 25 or 50 µm pixel width and 500 µm height o NMOS PDA S3903/S3904 – XXX 128 or 256 pixels with 25 or 50 µm pixel width and 500 or 2500 µm height CMOS low cost linear sensor arrays TSLW-1401R from TAOS The TSL1401R linear sensor array consists of a 128 × 1 array of photodiodes. The pixels measure 63.5 µm (H) by 55.5 µm (W) with 63.5 µm center-to-center spacing and 8 µm spacing between pixels. Operation is simplified by internal control logic that requires only a serial-input (SI) signal and a clock. Optional Electronics for CP Spectrographs High performance and compact electronic boards are available and feature: o 14 or 16 bit analog digital converter o M16C624 controller with 256K internal flash o trigger output o a selection of interfaces: USB / Serial / Parallel..... (TTL level) o power supply +5V (for RS232 interface) entrance slit CMOS and NMOS Photodiode arrays TAOS CMOS TSLW-1401R series USB SDC Board 21
Page 1 and 2: Gratings and OEM Division general s
Page 3 and 4: Introduction As a pioneer and world
Page 5 and 6: Spectrometers for OEM applications
Page 7 and 8: System light collection capability
Page 9 and 10: Spherical aberration (SA) Spherical
Page 11 and 12: Field curvature (FC) is the shape o
Page 13 and 14: Existing proof of concept systems T
Page 15 and 16: VS70-M The VS70-M is a plug and pla
Page 17 and 18: VS140-M The VS140-M is a plug and p
Page 19: Modular spectroscopy components a s
Page 23 and 24: Input: The VS spectrographs can acc
Page 25 and 26: Drive Electronics: These detectors
Page 27 and 28: Imaging compact spectrographs This
Page 29 and 30: Spectrometer comparaison chart comp
Page 31 and 32: H10-34B OEM imaging monochromator B
Page 33 and 34: 70 60 50 40 30 20 10 0 190 240 290
Page 35 and 36: Technical information Before introd
Page 37 and 38: Note that the lower the dispersion
Page 39 and 40: Projection of the grating width on
Page 41 and 42: G= � � d²G area of the source
Page 43 and 44: Information request form If you hav
Page 45 and 46: Fax form For more information or cu
Page 47 and 48: and product lines HORIBA Jobin Yvon

OEM spectro Catalogue - Horiba

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?