instructions for use creation press-ceramics zirconium oxide
instructions for use creation press-ceramics zirconium oxide
instructions for use creation press-ceramics zirconium oxide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INVESTING<br />
7<br />
Push the silicon ring on the crucible <strong>for</strong>mer. Fill to just below the<br />
edge of the silicon ring with special investment <strong>for</strong> injection-moulded<br />
<strong>ceramics</strong>. Put on the mould base <strong>for</strong>mer turning gently (investment<br />
should exude easily through the opening).<br />
After the investment has set, turn the mould base <strong>for</strong>mer and<br />
mould <strong>for</strong>mer carefully to remove them. Smooth the underside<br />
with a plaster knife. Follow the directions <strong>for</strong> preheating in the<br />
<strong>instructions</strong> <strong>for</strong> <strong>use</strong> <strong>for</strong> the investment.<br />
Important: Do not preheat the pellets!<br />
Preheat the alux plunger!<br />
Do not preheat the one-way plunger!