TDS lokal - Alle fuer Bodo Moel
TDS lokal - Alle fuer Bodo Moel
TDS lokal - Alle fuer Bodo Moel
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Technical Data Sheet<br />
BETASEAL X 1502<br />
Description / Application:<br />
Aftermarket Division<br />
One-component, high-viscous, humidity-curing polyurethane bonding/sealing compound for direct glazing<br />
system for fast link up and short drive away time. In addition it has a high shear modulus, very low volume<br />
resistivity and good high-frequency-properties. Due to these characteristics of Betaseal X 1502, a higher body<br />
It must be used in combination<br />
with the Glass Cleaner and Primer.<br />
All Dow Automotive products are primarily developed in co-ordination with the<br />
automobile manufacturers, according to their needs and their specifications; they<br />
are approved for the specific applications as defined by the customer.<br />
The use of the product other than approved application have to be released in<br />
writing by the Technical Service of Dow Automotive.<br />
Technical Data:<br />
Basis polyurethane prepolymer<br />
Colour black<br />
Density approx. 1.3 g/cm³ at 23°C<br />
Solids content > 95%<br />
Flash point > 100°C<br />
Environmental temperature<br />
Material operating temperature for extrusion<br />
5°C - 40°C<br />
10°C - 35°C<br />
Working time 8 - 12 min @ 23°C/50% rh<br />
Sagging behavior good<br />
Tack-free time approx. 10 min @ 23°C/50% rh<br />
Cure rate > 3.5 mm/24h @ 23°C/50% rh<br />
Ultimate tensile strength (DIN 53 504) > 4.5 MPa<br />
Percentage elongation approx. 350%<br />
Lap shear resistance (EN 1465) > 4.5 MPa (height of adhesive layer: 2mm)<br />
G-Modulus > 2.0 MPa at 10% strain after curing<br />
Recovery (EN 27 389) approx. 99%<br />
Shore A hardness (DIN 53 505) approx. 75<br />
Dow Automotive AG, Techn. Datenblatt, BETASEAL, Status terminated, Ausgabe 01, 25.08.99, Sie, Page 1
Specific electrical volume resistivity > 10 8<br />
Ohm*cm<br />
Abrasion resistance High<br />
Temperature stability -40°C to 100°C<br />
Resistance to chemicals Highly resistant to aqueous chemicals, petrol, alcohol and<br />
mineral oils.<br />
Conditionally resistant to esters, ketones, aromatics and<br />
chlorinated hydrocarbons<br />
Bonding surface preparation All bonding surfaces must be free of dirt, dust, water, oil and<br />
grease. Glass surfaces should be primed. Verify compatibility<br />
or consult our technical service department.<br />
Processing equipment Handgun, airgun<br />
Storage Temperature: +5° C to +25°C<br />
Short time storage temperature: 0°C to + 40°C<br />
Shelf life 12 months between +5 °C and +25 °C in unopened<br />
containers (see "use before date" printed on the<br />
container).<br />
Containers 300 ml cartridges<br />
Protection measures See health and safety data sheet.<br />
Dow Automotive Quality Management<br />
Quality is our highest priority. Gurit-Essex works with a highly modern Quality Management System which meets<br />
all international requirements of QS 9000, VDA-6 and ISO 9001.<br />
Dow Automotive AG Dow Automotive (Italia) S.r.l Dow Automotive (France) S.A.<br />
CH-8807 Freienbach I-20010 Bareggio (MI) F-60130 Saint-Just en chaussee<br />
Tel. +41(0)55416 81 11 Tel. +39(0)2 90 36 11 66 Tel. +33(0) 3 44 77 61 00<br />
Fax +41(0)55416 82 20 Fax +39(0)2 90 27 66 98 Fax. +33(0) 3 44 77 61 61<br />
Dow Automotive (Deutschland) GmbH Dow Automotive (España) S.A. Dow Automotive (UK) Ltd.<br />
D-35683 Dillenburg E-28816 Camarma de Esteruelas (Madrid) GB-Nuneaton-Warwickshire CV10 7QT<br />
Tel. +49(0)2771 8 71 40 Tel. +34 (9)1 886 61 43 Tel. +44 (0) 24 7635 72 00<br />
Fax +49(0)2771 87 14 70 Fax +34 (9)1 885 75 60 Fax. +44 (0) 24 7635 72 57<br />
Dow Automotive AG, Techn. Datenblatt, BETASEAL, Status terminated, Ausgabe 01, 25.08.99, Sie, Page 2