TAG Heuer by Chronelec Software Suite - Event Timing
TAG Heuer by Chronelec Software Suite - Event Timing
TAG Heuer by Chronelec Software Suite - Event Timing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
18. “Decoder Setting” – Commands<br />
18.1. Menu Option<br />
On the top – left, you find a menu “Option” which allow you to<br />
• Update the Decoder with a new Firmware<br />
1. You have to switch OFF the Decoder<br />
2. Press button ENTER and maintain it and Switch ON the Decoder<br />
3. Go into the Menu Option – Update, Select the file and press OK<br />
4. After the update, you have to switch OFF / ON the decoder<br />
• Change the language<br />
18.2. Decoder<br />
You have the possibility to communicate with the new decoder via<br />
• Ethernet protocol (IP Address)<br />
• RS232 (19200 bds)<br />
• Protocol: should be <strong>Chronelec</strong> v3 (2009)<br />
For the IP address, please refer to the chapter below (chapter 3.2)<br />
18.3. Commands<br />
You have the possibility to visualize the frames send <strong>by</strong> the decoder<br />
“STA” + Transponder ID = Loop STA<br />
“BOX” + Transponder ID = Loop BOX<br />
“STA 000255” = Input 1<br />
“BOX 000255” = Input 2<br />
www.tagheuer-timing.com written <strong>by</strong> Marcus MAIERHOFER Page 46