TAG Heuer by Chronelec Software Suite - Event Timing

2.1.2. Connecting to the network drive
Go to the workstation and select the Tools menu, then connect a network drive.
Select a letter available and enter the network path of Data directory..
For Example:
You want to connect to Data directory of PC with the IP address 192.168.0.100:
Enter \\192.168.0.100\Data. If the connection is successful, another letter will appear in the workstation and
you have to view files in the Data directory.
3. Hardware setting
3.1.1. Protocol selection
Firstly, you have to set the communication port of your computer.
You may use a serial cable (with or without USB Adapter) or over Ethernet.
COM Port: Set the right com port used. In order to find the COM Port number you may refere to your
Operating system manager.
Select the COM Port attributed by your computer.
Open up Device Manager. Right click on "My Computer"
and select properties (at the bottom of the list that pops up).
In the software, simply specify the
letter of your choice (Z for example)
to import data from the network.
www.tagheuer-timing.com written by Marcus MAIERHOFER Page 6