TAG Heuer by Chronelec Software Suite - Event Timing
TAG Heuer by Chronelec Software Suite - Event Timing
TAG Heuer by Chronelec Software Suite - Event Timing
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• Choose Internet Protocol TCP/IP<br />
• Again, select Properties<br />
• Select Use the following IP address<br />
• Enter the correct IP address<br />
Example: 192.168.000.001<br />
The Subnet mask will come<br />
automatically (255.255.255.0)<br />
Note<br />
The IP addresses should be similar on<br />
the first 3 groups of the 3 numbers<br />
(example : 192.168.000.xxx)<br />
The last groups of 3 numbers should be<br />
different<br />
Example:<br />
Decoder IP = 192.168.0.10<br />
PC IP = 192.168.0.03<br />
If your PC is never connected to a LAN,<br />
you can make this address permanent.<br />
If not, to retrieve to the original setting,<br />
please select Obtain an IP address<br />
automatically<br />
In order to test the communication between the decoder and your computer you may do a brief<br />
test. Data frames should come into the communication window.<br />
Note that this test mode don’t work with the Chronoprinter 540.<br />
www.tagheuer-timing.com written <strong>by</strong> Marcus MAIERHOFER Page 8