Manual - Maintenance Electronique / Monitors Service Center

4 Operating Instructions
4-2 Power Management System
This monitor has a built-in power management
system called PowerSaver. This system saves
energy by switching your monitor into a lowpower
mode when it has not been used for a
certain amount of time. The available modes are
“On,” “Standby,” “Suspend,” and “Off.”
This system operates with a VESA DPMS
compliant video card installed in your computer.
You use a software utility installed on your
computer to set up this feature. See the table
below for details.
Note 1: This monitor automatically returns to
normal operation when horizontal and
vertical sync return. This occurs when you
move the computer's mouse or press a key
on the keyboard.
State
Items
Horizontal Sync
Vertical Sync
Video
Power
Indicator
Power
Consumption
Table 4-2. Display Power Management Signaling (DPMS)
Normal
Operation
Active
Active
Active
Green Orange
150 W (max.)
130 W (nominal)
Power Saving Function EPA/NUTEK
Standby Mode
Inactive
Active
Blanked
130 W (max)
110 W
(nominal)
Suspend Mode/
Position A1
Active
Inactive
Blanked
Orange/Green
Blinking
Less than
15 W
Power-off Mode/
Position A2
Inactive
Inactive
Blanked
Orange
Blinking
Less than
5 W
Note 2: This monitor is EPA Energy Star
compliant and NUTEK compliant when
used with a computer equipped with
VESA DPMS functionality. If your
computer system cannot support a display
power management function, you can
purchase an optional DPMS software
program to enable the power saving
function. Please contact Samsung or your
dealer for more information.
Note 3: For energy conservation, turn your
monitor OFF when it is not needed, or
when leaving it unattended for long
periods.
4-2 SyncMaster 1000s (CGP1607L)