Sauer-Danfoss series S45 axial piston open circuit

More documents

Recommendations

Info

ContRoLs (continued) Specifications 32 520L0519 • Rev FN • July 2009 Series 45 Axial Piston Open Circuit Pumps Technical Information Frames L and K electric proportional control (eJ) (normally closed) PC control setting range model bar psi L25C, K38C L30D, K45D Schematic diagram EJ schematic Legend X B = Outlet S = Inlet L1, L2 = Case drain M2 = System pressure gauge port X = Remote PC port M2 L2 B 100-260 bar 1450-3370 100-210 bar 1450-3045 S L1 P106 687E LS setting range model bar psi all 12-40 174-580
inPut sHafts Code Description C2 13 tooth spline 16/32 pitch (ANSI A92.1 1970 - Class 5) C3 15 tooth spline 16/32 pitch (ANSI A92.1 1970 - Class 5) t1 Ø 25.4 mm [1 in] 1:8 taper (SAE J501) Series 45 Axial Piston Open Circuit Pumps Technical Information Frames L and K maximum torque rating¹ N•m [lbf•in] Drawing 288 [2546] 404 [3575] 362 [3200] 520L0519 • Rev FN • July 2009 Ø18.82 [0.74] MAX 8 ± 0.475 [0.31 ±0.02] COUPLING MUST NOT PROTRUDE BEYOND THIS POINT Ø21.92 MAX [0.863] 8± 0.475 [0.31 ±0.02] COUPLING MUST NOT PROTRUDE BEYOND THIS POINT 25. 4 [1 ] 8 ± 0.8 [0.31 ±0.03] 69.89 REF [2.75] 34.92± 0.63 [1.375 ±0.025] C OUPLING MUST NO T PR OT RUDE BEY OND THIS POINT 1. See Input shaft torque ratings, page 18 for an explanation of maximum torque. 26.97 [1.06] 15.2 ±0.5 [0.6 ±0.02] 33 [1.3] Ø21.72 ± 0.09 [0.855 ±0.004] 23.35 ± 0.5 [0.92 ±0.02] 38 [1.5] 13 TOOTH 16/32 PITCH 30° PRESSURE ANGLE 20.638 [0.813] PITCH DIA FILLET ROOT SIDE FIT COMPATIBLE WITH ANSI B92.1-1970 CLASS 5 ALSO MATES WITH FLAT ROOT SIDE FIT P101 993E 15 TOOTH 16/32 PITCH 30° PRESSURE ANGLE 23.813 [0.938] PITCH DIA FILLET ROOT SIDE FIT CLASS 5 ALSO MATES WITH FLAT ROOT SIDE FIT Ø25.27 ± 0.12 [0.995 ±0.005] 9.42 ± 0.3 [0.37 ±0.01] P101 994E 6.299 +0.025 -0.000 [0.248 +0.001 -0.000 ] [0.875 WOODRUFF KE Y +0.000 -0.000 22.225 +0.254 -0.010 ] Ø22.22 GA UGE [0.87] 3/4-16UNF-2A THD 125 TAPER PER METER COMPATIBLE WITH SAE J501 25.4 [1] NOMINAL SHAFT DIAMETER GA UGE P101 996E 33
Page 1 and 2: Series 45 Axial Piston Open Circuit
Page 3 and 4: GeneRaL infoRmation fRames L anD K
Page 7 and 8: tHe seRies 45 PRoDuCt famiLy Series
Page 9 and 10: PRessuRe ComPensateD ContRoLs For a
Page 11 and 12: LoaD sensinG ContRoLs For additiona
Page 13 and 14: oPeRatinG PaRameteRs Series 45 Axia
Page 17 and 18: DesiGn PaRameteRs (continued) Shock
Page 19 and 20: DesiGn PaRameteRs (continued) Serie
Page 23 and 24: PeRfoRmanCe L25C Flow and power dat
Page 25 and 26: PeRfoRmanCe K38C Flow and power dat
Page 27 and 28: oRDeR CoDe Series 45 Axial Piston O
Page 29 and 30: ContRoLs Specifications Schematic d
Page 31: ContRoLs (continued) Specifications
Page 35 and 36: auxiLiaRy mountinG PaDs See page 18
Page 39 and 40: instaLLation DRawinGs (continued) A
Page 41 and 42: instaLLation DRawinGs (continued) 1
Page 45 and 46: PeRfoRmanCe J45B Flow and power dat
Page 47 and 48: PeRfoRmanCe J60B Flow and power dat
Page 49 and 50: PeRfoRmanCe J75C Flow and power dat
Page 51 and 52: oRDeR CoDe (continued) Series 45 Ax
Page 53 and 54: ContRoLs (continued) Specifications
Page 55 and 56: inPut sHafts Code Description C2 13
Page 57 and 58: inPut sHafts (continued) Code Descr
Page 61 and 62: instaLLation DRawinGs SY STEM PORT
Page 63 and 64: instaLLation DRawinGs (continued) S
Page 65 and 66: instaLLation DRawinGs (continued) 1
Page 67 and 68: DisPLaCement LimiteR enDCaPs Series
Page 69 and 70: sPeCifiCations For general operatin
Page 71 and 72: PeRfoRmanCe f90C Flow and power dat
Page 73 and 74: oRDeR CoDe (continued) Series 45 Ax
Page 75 and 76: ContRoLs (continued) Specifications
Page 79 and 80: aDJustaBLe DisPLaCement LimiteR anD
Page 81 and 82: axiaL PoRteD enDCaP (continued) PC
Page 83 and 84:
RaDiaL PoRteD enDCaP (continued) PC
Page 85 and 86:
Series 45 Axial Piston Open Circuit
Page 87 and 88:
PeRfoRmanCe e130B Flow and power da
Page 89 and 90:
oRDeR CoDe Series 45 Axial Piston O
Page 91 and 92:
ContRoLs Specifications Schematic d
Page 93 and 94:
inPut sHafts Shaft data Code Descri
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
instaLLation DRawinGs (continued) 5
Page 101 and 102:
instaLLation DRawinGs (continued) T
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
show all

Sauer-Danfoss series S45 axial piston open circuit

Create successful ePaper yourself

Delete template?

Save as template?