Operating and Safety Instructions - Sauer
Operating and Safety Instructions - Sauer
Operating and Safety Instructions - Sauer
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Malfunctions<br />
10.2 Cause <strong>and</strong> remedy of malfunctions<br />
Malfunction Possible cause of<br />
malfunction<br />
No round chambered. Magazine not properly inserted,<br />
deformed or dirty.<br />
Bolt cannot be inserted into the<br />
receiver.<br />
Rifle faulty.<br />
Bolt h<strong>and</strong>le catch not pressed.<br />
Mainspring is uncocked.<br />
Rifle faulty.<br />
Rifle trigger cannot be set. Rifle is uncocked.<br />
Rifle faulty.<br />
Rifle cannot be locked. Rifle is uncocked.<br />
Rifle can be neither unlocked<br />
nor opened.<br />
Rifle trigger is set. When pulling<br />
the trigger tongue no shot fires,<br />
instead the trigger tongue<br />
returns to the start position.<br />
Rifle disengages automatically<br />
when locking.<br />
Rifle faulty.<br />
Rifle has trigger set <strong>and</strong> is<br />
locked.<br />
Rifle faulty.<br />
Trigger tongue was pulled to the<br />
side.<br />
Possible remedy of<br />
malfunction<br />
Insert magazine all the way until<br />
it engages<br />
(see section 5.8.2).<br />
Repair by manufacturer.<br />
Press bolt h<strong>and</strong>le catch<br />
(see section 5.7.3).<br />
Cock the bolt<br />
(see section 5.7.1).<br />
Repair by manufacturer.<br />
Cock the rifle<br />
(see section 5.7.1).<br />
Repair by manufacturer.<br />
Cock the rifle<br />
(see section 5.7.1).<br />
Repair by manufacturer.<br />
Unset the rifle trigger<br />
(see section 5.9.2).<br />
Repair by manufacturer.<br />
Reset, pull trigger tongue back<br />
straight/linear.<br />
Set trigger is set too soft. Immediately adjust the set<br />
trigger harder<br />
(see section 5.9.1).<br />
10.07 GB<br />
32
Change language