InfoJet+ - Gerber Technology

InfoJet+
Part Identification System
Technical Specifications
Control Unit
Control Panel Membrane touch bu1on or op3onal 10.4" SVGA color touch screen
Cabinet Stainless steel (304) designed to IP53 (BSEN 60529:1992)
Cabinet Dimensions 245mm x 475mm x 725mm (9.6" x 18.7" x 28.5")
Weight 36 kg. (79 lbs.)
Auto repeat, character width and height adjustment, auto invert/reverse, user-­‐defined clock
Character Control
format, print delay, sequen3al/batch numbering, inverse reverse and bold characters, message
repeat
Ink System
Print Head
Environment
Built in Ethernet port
Viscosity control Automa3c
Ink bleed control Automa3c on start up
Ink and make-­‐up refill 825 ml. (0.87 qt) cartridge automa3cally metered
Dimensions 240mm x 41mm x 47mm (9.45" x 1.61" x 1.85")
Conduit Length 3m (11'8") or 6m (23'6")
Airdryer Internal compressor
Temperature range 5˚C-­‐45˚C (40˚F-­‐112˚F) opera3ng
Humidity 10-­‐90% (non-­‐condensing)
Electrical Requirments Single phase, fully auto-­‐ranging 100-­‐250V, 47-­‐63Hz
Gerber Technology, Tolland, CT 06084 USA - Tel: +1(860) 871-8082
www.gerbertechnology.com - info@gerbertechnology.com
Copyright © 2011 Gerber Scientific International, Inc. - Form No. InfoJet-E-08152011