Trilogy TX Specification - Behestan Darman

6.1.6 Isocenter Height (nominal): 129.5 cm
6.2 Collimator
6.2.1 Extended Rotation Range: ±165°
6.2.2 Mechanical Isocenter Accuracy:
≤0.05 cm radius from isocenter
6.2.3 Position Indicators (gantry and console)
6.2.3.1 Digital Readouts:
• Accuracy: ±0.5°
• Resolution: 0.1°
6.2.3.2 Mechanical Scales:
• Accuracy: ±1.0°
• Resolution: 1.0°
6.3 Field Size Collimation
6.3.1 Range: The field size is continuously
variable from 0.5 x 0.5 cm2 to 40 x
40 cm2 as measured at 100 cm TSD.
Field sizes larger than 35 x 35 cm2 are
limited to a 49.5 cm diagonal (the
diameter of the circle defined by the
primary collimator at 100 cm TSD).
The field size is defined as the distance
along the radial and transverse axes
between the points of 50% density on
an X-ray film taken at 100 cm TSD with
minimum buildup. The SRS 6 MV
beam field size is limited to a maximum
of 15 x 15 cm2 .
6.3.2 Position Indicators
• Accuracy: ±0.2 cm
• Resolution: 0.1 cm
6.3.3 Light and X-ray Field Coincidence: The
field-defining light coincides to within
1.5 mm of the 50% isodensity line on
an X-ray film. This is defined at 100 cm
TSD with minimum buildup for any
field size.
6.4 Exact ® Couch with Indexed Immobilization 6.4.1 The Exact Couch is standard with
Trilogy Tx. (Specifications and standard
vs. optional accessories for the Exact
Couch are provided on Exact Couch
specification sheet, RAD 1951.)
page 9
6.4.2 Motion Controls
• Two Hand Pendants that control the
accelerator and Exact Couch
• Two Couch Side Panels
• Remote Couch Control
6.4.3 Position Indicators
• Corrective motions: small translations
(in x, y, and z) and small rotation of
the couch to fine tune patient setups
• Planned motions: large rotations of the
couch to sequence between noncoplanar
fields and arcs
6.4.3.1 Translation
• Accuracy: ±0.1 cm
• Resolution: 0.1 cm
6.4.3.2 Rotation
• Accuracy: ±0.5°
• Resolution: 0.1°
6.5 Compact stand assembly
6.5.1 Single access and through-door viewing
of all gas and water system status
indicators
6.5.2 Imager electronics (PortalVision MV
imaging system and On-Board Imager kV imaging system) incorporated in
reduced height stand
7.0 Mechanical Accessories Options
The following optional accessories are available with
Trilogy Tx and the Exact Couch:
7.1 Collimator Accessories:
• Interface Mount
• Accessory Mount
• Port Film Graticule
• 4-Way Wedge Set (four wedges 15°, 30°,
45°, 60°)
• Optional Electron Applicators: A set of
five electron applicators can be provided, with
selection from 6 sizes: 6 x 6 cm2 , 6 x 10 cm2 ,
10 x 10 cm2 , 15 x 15 cm2 , 20 x 20 cm2 , and
25 x 25 cm2 .
Varian Trilogy Tx specifications