DSA Report 6121 Lundy's Lane - Niagara Falls, Ontario, Canada
DSA Report 6121 Lundy's Lane - Niagara Falls, Ontario, Canada
DSA Report 6121 Lundy's Lane - Niagara Falls, Ontario, Canada
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Scope of Work for the Removal of Identified Designated Substances<br />
City of <strong>Niagara</strong> <strong>Falls</strong> – <strong>6121</strong> Lundy’s <strong>Lane</strong>, <strong>Niagara</strong> <strong>Falls</strong>, ON<br />
PERSONAL PROTECTIVE EQUIPMENT AND RESPIRATORY PROTECTION - ASBESTOS ABATEMENT:<br />
Protective clothing shall be provided by the employer and worn by every worker who enters the work<br />
area(s). The protective clothing shall:<br />
1. Be made of material that does not readily retain nor permit penetration of asbestos fibres<br />
2. Consist of head covering and full body covering that fits snugly at the ankles, wrists and neck, in<br />
order to prevent asbestos fibres from reaching the garments and skin under the protective<br />
clothing<br />
3. Include suitable footwear<br />
4. Be repaired or replaced if torn<br />
The employer shall provide every worker who will enter the work area(s) with a NIOSH approved<br />
respirator in accordance with the general requirements for respirators outlined in Section 13 and Table<br />
2 of O. Reg. 278/05 (as amended) and the worker shall wear and use the respirator.<br />
SPECIFIC MEASURES AND PROCEEDURES FOR PROJECT - SILICA ABATEMENT:<br />
The generation of silica-containing airborne dust should be controlled by thoroughly wetting the area<br />
prior to and during the drilling or cutting operations and during the loading, scraping or moving.<br />
PERSONAL PROTECTIVE EQUIPMENT AND RESPIRATORY PROTECTION - SILICA ABATEMENT:<br />
A NIOSH approved respirator for Type 2 silica operations in accordance with respirator requirements as<br />
outlined in Table 1: Respirator Requirement of Guideline – Silica on Construction Projects.<br />
WASTE TRANSPORT AND DISPOSAL<br />
Conform to requirements outlined in <strong>Ontario</strong> Regulation 347 – General – Waste Management (as<br />
amended) for waste management, transporting and disposal of hazardous waste.<br />
Ensure shipment of containers to dump is taken by waste hauler licensed to transport hazardous waste.<br />
Retain receipt of disposal and submit to owner as proof of disposal.<br />
PROJECT CLOSEOUT<br />
Polyethylene sheeting, seals, tape, cleaning material, clothing, and other contaminated waste is to be<br />
disposed of in waste containers suitable for the type of waste, impervious to the waste intended for and<br />
clearly identified and included for hazardous waste.<br />
The contractor is to conduct a final visual inspection of the work area(s) to ensure all types of dust or<br />
debris is not visually evident.
Change language