OWNER'S MANUAL - Health Mate Far Infrared Sauna
OWNER'S MANUAL - Health Mate Far Infrared Sauna
OWNER'S MANUAL - Health Mate Far Infrared Sauna
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
[P.19]<br />
SESSION SETTING MODE CONTINUED<br />
3. SWITCHING BETWEEN °F AND °C: You can alternate between Fahrenheit and Celsius while in setting mode. Once the session<br />
has begun, changes cannot be made. By pressing TEMPERATURE UP and INTERIOR LIGHT keys simultaneously, you can switch between<br />
°F and °C. The temperature mode indicators (°F or °C) on the right side of display screen will be lit accordingly.<br />
4. You can start the session with adjusted time and temperature values by pressing the ON button.<br />
SAUNA IN SESSION<br />
3<br />
2<br />
RESERVATION MODE<br />
1<br />
2<br />
5<br />
4<br />
5<br />
3<br />
4<br />
Digital Control Operating Instructions Cont’d<br />
3<br />
MORE ABOUT RESERVATION MODE<br />
* Reservation mode enables the user to set a desired time when the sauna will be turned on automatically. This<br />
feature is useful in reducing wait time for pre-heating your sauna.<br />
1. Press OFF button to turn the power off.<br />
2. Press and hold the RESERVATION button for 3 seconds.<br />
3. Previous reservation time will flash on the display and AM/PM and RESERV will be lit. 12:00 will flash<br />
on the display and AM and RESERV will be lit if it is being set for the first time.<br />
4. Press HOUR and MINUTE button to set the clock at a desired time. AM and PM will change accordingly.<br />
5. When the desired time has been set, press and hold the RESERVATION button for 3 seconds to confirm the<br />
reservation.<br />
1. The reservation mode allows to set the starting time only. The same temperature value stored in memory (preset value) will be<br />
used, and it cannot be changed while in reservation mode. No changes can be made to the preset session length of 30 minutes.<br />
2. Reservation function is for 1-time use only and will not be repeated automatically.<br />
3. If you would like to repeat the same reservation time from the previous setting, press and hold the RESERVATION button for 3<br />
seconds to go into reservation mode. The last reservation time will flash on the display. Press and hold the RESERVATION<br />
button for 3 seconds again to confirm the time shown on display.<br />
4. When the sauna is in reservation mode, the RESERV will stay lit until it reaches the set time.<br />
5. If the sauna is turned on within 2 hours of the reservation time, the setting will be cleared from the reservation mode.<br />
6. When the sauna reaches the reservation time, an alarm will sound and the session will start. The interior light will be turned on<br />
as well. If no changes are made to the setting, the sauna will operate as normal and terminate the session at the end of 30 minutes.<br />
7. If the user makes changes to time or temperature settings once the sauna session has begun, the sauna will go into a normal<br />
mode and operate according to changed values.<br />
8. To cancel the reservation, press RESERVATION button until the display blinks, then press the OFF button to clear the setting.<br />
OTA (OVERTIME TEMPERATURE ALARM)<br />
1. While the sauna is in use, the display will alternate between remaining session time and current<br />
temperature every 10 seconds. “LO” will be displayed before current temperature reaches 90°F.<br />
2. Press the CLOCK button to view the current time during a session. The time will be displayed for 5 seconds<br />
and will revert to displaying remaining session time and current temperature.<br />
3. You can change time and temperature during a session time by pressing UP/DOWN ARROWS for either time<br />
or temperature. However, changes made while the sauna is in use will not affect the preset values in<br />
memory.<br />
4. Press INTERIOR LIGHT button to turn on or off interior light during a session time.<br />
5. Press OFF button to terminate a session.<br />
1. If the inside temperature reaches the maximum temperature of 180°F, OTA will flash on the display screen and an alarm will<br />
sound for 5 seconds. The unit will turn itself off automatically.<br />
2. Once the unit has been shut down due to OTA, let it cool off for about 30 minutes with the door open. Unplug the power cord<br />
from the wall outlet and plug it back in to reset the unit. The sauna is now safe to use again.